OK, but how did you turn it without destroing it? o.O
Printable View
OK, but how did you turn it without destroing it? o.O
Very slow and gentle. ;) Maybe it is even easier with some heat?
Hmmz I guess mine it's better "soldered" there. :(
i get this mobo today and i have to say that i like it a lot:fact: .I can bench spi32m 100mhz higher at the same voltage as on commando:woot:
spi32m@3900mhz(1.59v) 488x8 on air
http://shrani.si/thumbs/32m12mzp5l.png
BTW: Is there already any way to use strap 1333 on this mobo??
I only hope I get results like that with m F 6600, I know I will get the post out of it possible though.Quote:
Originally Posted by krompirusa
hi all,
today i decided to update to the latest beta bios (cause of some important fixes), but it failed! :mad: now my system locks up everytime i boot.. error code on the display is C1. is there any way to recover the bios?? :rolleyes:
whats the deal with all the Bios flashing problems, Im scared to flash now, but with the current bios I cannot do any thing. Every time I boot to cd the system reboots, I was told I needed a PS2 keybaord, but all i can find is a ps2/usb adapter which won't get picked up. I was just going to flash in windows and take the risk, but I cannot install. This board is angering me.
I just updated to v1.1 with FlashMenu and went well. :p:
I've flashed the board many times and no problems at all
Some Screens 500 FSB
http://img463.imageshack.us/img463/3...fsb2dn2.th.jpg
next I will try for lower mem timings and lower voltages
Did u use Flashmenu? if u did thats why, cant update beta bios using flashmeu, it says ont he intructions that come with beta bios, USE A FLOPPY NEXT TIME , i only had that problem cause i use flashmenu once with a beta bios and intructions said so not use flashmenu but i did like a retard,Quote:
Originally Posted by Techie
try this if it doesnt work order a new bios chip from ABIT , is 15 dollars http://pages.sbcglobal.net/jefn/bootblock.html
8+ hours Orthos blend @ 500FSB in vista32
Too bad abit don't add sub timings. I can do 5-5-4-12 @1000mhz 2.2V no problem. I would go higher then 1100mhz and loosen those timings though if I could. I am sure this memory can handle it. At this strap though the next speed I can choose in bios is 1250mhz but without subtimings, and an increase probably to >2.3V I won't get the chance.
I have tested this OCZ to 1175 stable at higher multi and lower FSB...We need Subtimings! :)
http://img463.imageshack.us/img463/3...fsb2dn2.th.jpg
whoho!
I managed to save my board from a bad bios flash.
the boot screen when my board was screewed showed
-------------------------------------------------------
award bootblock bios v1.0
Copyrigth (c) 2000, Award software Inc.
Bios rom checksum error
Detecting floppy drive a media...
drive A error. system halt
------------------------------------
I had no floppy drive so i thought that i was screwed but when i decided to send it away for rma i found a floppy drive at home and then the boot secuence(sp) went on and i was able to boot from the old win me boot disk and then i inserted another floppydisk with the awardflash and the same 1.1 biosfile and reflashed.
yay!! no need for new board...
edit: does the board clock higher on the mem side now or is pointless to try over 1040mhz on memories even with this 1.1 bios.
runnin ballistix 6400 that can do 500 at stock with cas 5 havent tired more but im very tempted to buy the new ballistix 8500 series or maybe its better sticking with what i already own.?
What are the coolers used for the NB and SB ?Quote:
Originally Posted by blossa
I've tried to bench mine, but they are very well soldered. I just managed to bend the heatpipe, but i'm afraid to break it.
Looks like Noctua NC-U6 on NB and Thermalright HR-05 SLI on SB. ;)Quote:
Originally Posted by guynemer
korby is correct about the coolers. ;)Quote:
Originally Posted by guynemer
Well, I bent my pipes a little also but not that much. I guess you do not need to turn the NB-cooler as much as I did. I only needed to move it that far because of my Ninja on the CPU. :( Thinking about it right now maybe I should hav bent it a bit closer to the GFX instead?
pillo-kun, nice boot block save! i take it you have a spare pci video card? requirements are pci video, ps2 keyboard, floppy, right?
This one is stuck, I can't bent it. :(
blossa, what do you think. Does the Noctua NC-U6 worth more then TR HR 05? Mostly for fanless use. :)
my result with this board after a few hour working !
http://valid.x86-secret.com/show_oc?id=195567
http://forum.amtech.com.vn/attachmen...1&d=1178595675
nice friggin result!! image doesnt work unless youre a member of amtech and logged in. could you post on imageshack or something
what is FlashMenu?
and if this board won't boot to a floppy, how else can i upgrade the BIOS? anyway to use a jump drive?
hmm, my quad gt acts kinda strange...
400mhz work with stock volts, for 423 i need 1.55vmch and 1.4vtt, but 445 is a no go. :(
u guys got any advice for me? im on aircooling but i think 450mhz should be no problem, right?
try using single stick single channel
try bumping vichio to 1.6
What exactly do you mean by this? what is command shutdown?Quote:
Originally Posted by Ace-a-Rue