Printable View
Holy crap that guy went from 290fsb to 510 just by unplugging USB devices? WTF. I'm at work until 6pm PST and i'll try this. Even so that is a crappy solution because i don't even have a ps2 mouse i can use.Quote:
Originally Posted by aldamon
He mentioned that he removed them from teh back, but has the front USB to mainboard still in use?
All USB devices were unplugged, including the extra header on the motherboard. Also, please note that he dropped down to 512MB of RAM to hit 500+.Quote:
Originally Posted by BottomsUp
I think we need some MAJOR friggin' BIOS work on the DS3 done.
one of you college students sitting at home right now go try this!!! lolQuote:
Originally Posted by aldamon
CAn you state vFSB, and PCI-e voltage used?Quote:
Originally Posted by kiwi
vFSB/PCI-e volts all default :)
Hmm, unplug USB, will try :D
why are they setting PCI-E buss speed to 101?
what is conroe safe temperature? 70C ? it isnt to much ?
DS3 i think telling true temps
The highest I've seen on mine is around 49 C under full load, at 2.8 GHz (E6300).
GA-965P-DS3 F3 BIOS, E6300 OEM (TigerDirect) Stepping 6, OCZ EL Gold 2x1 GB 5-5-5-15 2.0 volts 800 MHz
All stock voltages (except ram, but thats specced at 2.0 volts):
http://img513.imageshack.us/img513/4...ourssp6.th.jpg
thanks!
on box cooling, and 3.2ghz i have max 64C on full load. tomorow i again i will by "on water" ;) so temp will be better :) (im waiting for new tube of arctic silver 5)
http://img50.imageshack.us/img50/6339/loadok1.th.jpg
What is Temp3 = -1C? I have that too. I'm thinking it's my ATI video card mis reporting.Quote:
Originally Posted by logigamer
i dont know ... maybe gpu, but i have nvidiaQuote:
Originally Posted by BottomsUp
Ok i see 12 voltage regulators. I thought there was only 8, 12 for the DQ6. I already bought them microcool mosfet sinks, so do i need to put on all 12 or only 8 of them are the actual regulators for the cpu?Quote:
Originally Posted by kiwi
Quote:
Originally Posted by kiwi
have you tried PCI @ 100mhz+
vfsb seems to be useless for me
nice run btw
I tried 101 PCI-E so far
But strange thing I have fsb wall at 497fsb no matter what multi/vmch/vfsb/vdimm or ram timings (corsair UL) I can hit that with only +.1V vmch but +.3 won't help.
I have dice container for chipset and in a few days I will see if it helps a lot or not. Anyway I think I need to mod vmch :)
a better cooling than stock HS help me to get a few mhz more,dice will be funny and 510 mhz is a easy go for you
can you check the real vmch?
i always run by 0.3v and i don`t rememebr what i got with only 0.1v ,
i will give a try and i will be back later with numbers
Aircooled E6600 1.57Vcore, 28°c ambiant temp.
http://pageperso.aol.fr/misteroadster/12.7.JPG
Quote:
Originally Posted by misteroadster
Easytune or BIOS?
Quote:
Originally Posted by misteroadster
It seems ES B1 still > Retail B2.
I can just barely hit 500fsb with mine
mch and fsb at +0.3v
vcore stock and just pushed up using easytune
locked up when I tried to run 4M
http://members.optusnet.com.au/arcto...0fsb-spi1m.JPG
5-5-5-12 comes up weird so not sure if it's actually running that
maybe I should test ram first to see how far I can get
Dang, and I can't even get past 2.8Ghz with my retail E6600 with an Ultra-120.Quote:
Originally Posted by misteroadster
WTF is wrong with my setup?!?!
Wow, I hope either something is wrong or it's a dud, retail steppings can't be that bad.Quote:
Originally Posted by Brahmzy
Managed to get an extra 4 Mhz FSB Prime stable by disabling Legacy USB support in the BIOS.....
It might go higher, but i'm gonna prime for another hour or so to make sure it's stable. 1.375v set in BIOS. Droops to like 1.32.
http://i65.photobucket.com/albums/h2...enprime-08.jpg
How long do folks prime for, on average?...i usually leave it six hours and run SuperPi as well.
I run dual-Prime with large FFTs for at least 8 hours. I wish OCCT were dual-core friendly. I prefer using it over Prime. It finds errors in a fraction of the time :(