OMG WOW
I work still new bios DFI NF4 ram tabl 3.16
http://hslab.pl/Merlin/Pics/FSB_375.jpg
Merlin
Printable View
OMG WOW
I work still new bios DFI NF4 ram tabl 3.16
http://hslab.pl/Merlin/Pics/FSB_375.jpg
Merlin
prime @ 3ghz
http://img318.imageshack.us/img318/1...hzprime5an.jpg
& superpi 1mb (wenn das ding nur 1mb chache hätte......)
http://img265.imageshack.us/img265/4...enannt39cs.jpg
3000+
ADA3000DAA4BP
LBBLE0521APMW
DFI NF4 Ultra-D
Air cooling is running at a low speed so my ears don't bleed (Venus 12), which is why my temps are getting a bit high. Intend on getting my w/cooling out and strapping it in place again, just need to find time. Also will be strapping my LS to it just to see what it can do with some sub zero cooling.
Ram is woeful, so the system running at 150 divider, but hopefully that will be resolved in the next couple weeks ;) BTW, this is a stable 24/7 system, not a suicide.
Those are some great OC you guys have. :woot:
Me, on the other hand, like to do OC at the cooler side, do not like to raise the voltage to over 1.4.
http://members.shaw.ca/tsopin/0718053.jpg
http://wowgame.free.fr/3000+%20939/L....9v3153Mhz.jpgQuote:
Originally Posted by by -=Merlin=-
Merlin BIOS 03/07/05
can i test your new 10/07/05 merlin ?
where can find it :confused:
(or PM me to test :toast: )
my 3000+ 0517APJW
stuff in sig, except watercooled
Storm G4, Maze4, D5, 2-302 heatercore
4.5+ hours prime95 @ 2.95 Ghz w/ 1.66 volts
http://img.photobucket.com/albums/v7...verclock-1.jpg
my results.
LBBLE 0517 GPMW. Its not flash i know
http://i7.photobucket.com/albums/y275/knobi/2.jpg
latest. Dont look at the vcore. Terrible isnt it? Running 510-1 bios
http://i7.photobucket.com/albums/y27...i/276caa4a.jpg
Got 2.96 Ghz fully stable
I clockgenned up in windows before i started SP2004 running, so the CPUZ reading is correct, its 2955.3 Mhz. Also SP2004 is saying the incorrect time, i started ~1:28 AM and let it run overnight.
http://img.photobucket.com/albums/v7...clocking/2.jpg
http://i16.photobucket.com/albums/b17/EAGE1981/1.jpg
new week 0525 APMW E6 core!i can do 1.26V but prime95 only stable 5hours!! :stick: :banana: :banana: :banana:
http://afireinside.evilspork.net/AFI/venice/GCS0010.jpg
3500+ LBBLE 0519 venice under dry ice -65C load
Well I've got a new board on the way as this one has some issues. But I still got a pretty good OC out of this thing with my Vinnie. :D
[IMG]http://img237.imageshack.us/img237/4...hunter13ml.jpg[/IMG]
Chip: LBBLE 0517
Colling in sig
3 Ghz is stable with 1.73 volts...
Here is 2.99 stable with 1.7 volts, and i'm trying to bring the Vcore down even more
http://img211.imageshack.us/img211/5...11hours2pv.jpg
air cooled just got this from newegg
retail 3000+
hyper6 cooler
http://www.xtremesystems.org/forums/...id=35335&stc=1
hi all
my 3000+ ybble0523cpgw
asus a8n-sli
294х9 :brick: Very badly I in a shock dear edition
http://i12.photobucket.com/albums/a215/umnik/.jpg
Yay! :)
http://www.mismatchrats.com/crap/so-yay.jpg
http://valid.x86-secret.com/show_oc?id=30887
Finally got my RAM working at 300 (Super Pi 32M and OCCT stable so far), thanks to the new 623-3 BIOS for the DFI nF4 Ultra-D. CPU is still at the same speed as before, it hates going much higher, the voltage just ramps really after this point.
I should be able to lower the CPU voltage a bit as I had it at 270x10 24h stable at 1.45V before. :)
Venice 3000+ CBBLE 0512 DPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)
http://www.membres.lycos.fr/boblemag...pbw/vi3000.jpg
2700mhz at 1.37v (300x9)
http://www.membres.lycos.fr/boblemag...5-VoltCore.png
2820mhz at 1.5v (313x9)
http://www.membres.lycos.fr/boblemag...1-VoltCore.png
http://www.membres.lycos.fr/boblemag...bw/2820mhz.png
here´s my 3000+ 0529 :) still testing...
here's my 0528 GPFW , at 2700mhz it freezes/reboots (I think a bad cpu :( )
http://img33.imageshack.us/img33/9903/superpi33s0uc.jpg
Xyus
This chip will do 2.832ghz stable but doesn't play nice with the ram at that speed. Both were tested seperately and ran fine but won't run together at max cpu speed.
3000+ Venice LBBLE 0517APJW
VCORE 1.74v (Reads higher in cpu-z pick due to fluctuation)
Water cooled
Temperatures idle 30ºc-31ºc/load 40ºc-41ºc
Specifications of System: In sig
Stability Tests: Prime95, 3DMark 01 03 05, Memtest86
http://img388.imageshack.us/img388/9...shot0016mn.jpg
Tried 2.8GHz @ 1.52Vcore with Zalman7700CU..
3200+ Venice 0517BPEW
OCCT --> HERE
How is it a bad CPU? It runs fine at stock speeds doesn't it? That's all it was intended to do.Quote:
Originally Posted by Xyus89
Where here at xtremesystems.org not atQuote:
Originally Posted by Dave_Sz
www.i-love-running-my-computer-stock.org :D
Here is mine. Still using stock AMD cooler. I am not sure if my memory is tweaked to the max or not. I know that I can't budge on the 2.5,3,3,8 timings and can't get 1T out of my ram but not sure if the other advanced timings could use some tweaking. I'm getting an XP-90 with panoflo and as5 coming to me, hopefully then I can squeeze a bit more out of it. It's 100% stable in all games/folding@home I throw at it. :D
http://img374.imageshack.us/img374/2...ice25507js.jpg
CPU: Athlon 64 3000+
Venice, Rev. DH-E3, LBBLE 0520BPMW, 1800@2700 1.65V (CPU-z uderscores)
CPU Cooler: Tt BigTyphoon
Max Idles: 35-36 *C
Max Loads: 54-55 *C (S&M v.1.7.2, High Priority, 100% Load)
Specs:
MB: DFI LP NF4 SLI-DR (Rev. AB0), BIOS Rev. 623-3
RAM: Kingston 2x512MB KHX PC3200 (Winbond BH-5) 2-2-2-5-1t 200@193 (CPU/14) 2.70v
Video: PCI S3 Trio64 V2/DX 1MB
HDD: IBM 60GB PATA-133 (IC35L060AVER07-0)
---
Comments:
Tested with Prime95 v.24.13 (Large FFT, High Priority).
2750 is unreachable. :stick: I'm not impressed with this Venice to say the least. :(
Hi,
I've got a venice +3000 but I can't see my rev with cpu-z 1.30.. ?
xyus
Try use CPU-Z ver. 1.29.
here
3200+ venice
http://valid.x86-secret.com/show_oc?id=34032
http://veytrex.net/1/cpu2.gif
Did someone test a 3200+ E6 already?
I have 3000+ LBBLE
DFI nf4 Ultra-;D
2*256MB NItro pc 3600 CL3
gf 6600gtextreme ledetek
Zalman 7700ALCU
BIOS 623-3!
I go to 2817Mhz at 1.776V SUPER PI 1MB stable! http://www.freeweb.siol.net/cpotocar/best2.JPG
Then 2745Mhz at 1.744V super pi 32MB stable! http://www.freeweb.siol.net/cpotocar...32mb-28min.JPG
Max BOOTEBLE freq: 2864Mhz vith 1.776V i don'g get higher with AIR Cooling!
My ram IS in F..K..G they don't go over 210 at CAS 3 at 3v???:mad:
Wow, 1.744v to get stable at 2.745Hz :eek:
Personally I would prefer a lower vcore on Venice than that...
just oc'ed my 0512 dpbw venice 3000+, to 2.8ghz (well 2799mhz to be exact) with 1.45v, - load temps after 10 hours of prime top out at 41degrees with an xp120 - but cheappy silicone goop until I lapthe heatsink properly at which time as5 will be used. Boosting voltage to1.475 doesnt seem to help to get 2.84 stable, is it worth trying more voltage to see if it can go higher, or would I see only small differences from here. Anyway my ram holds me back (currently on a divider running at 466 at 2.5-3-3-6 timings - but can manage up to about 490 on same timings - result of a mushkin blueline rma - went from utt to mosel chips) an 2.8 is a very nice result anyway, still any advice?
Quote:
Originally Posted by fxr91
yes i don't know why? mybe bios? i try with 8,5*330 and its stable at same voltage.
Mine will be here friday. I'm planning to burn it in for a week or so and I'll definitely post some screenies. Don't get your hopes up, this is my first RIG build/OC.Quote:
Originally Posted by d4n13l
Ok, I'm waiting...Quote:
Originally Posted by Dave_Sz
0523 EPMW 0794
http://users.telenet.be/jortcollijn/...ice/31.265.JPG
some testing my new cpu, its on water;)
1.6V but i'll work on it
Well, SVC and NEWEGG fudged up, mobo won't be here til monday, xp-90 on tuesday. The mobo, xp-90, and the venice were all bought within 30 minutes of eachother. Only the chip from ewiz will be ontime, friday, the mobo and HS were both rescheduled for no reason.Quote:
Originally Posted by d4n13l
Hi,
My new cpu. E6 0528 GPFW (that's why revision is empty)
http://img373.imageshack.us/img373/7943/superpi27am.jpg
good cpu , I'm sure I can hit 2800 mhz with 1.8vcore, it loves the vcore a little to much :(
Xyus
plz give commments.
Watch the volts Xyrus, thats very high for air, much higher than i run on water.
I know,
otherwise it isn't stable :(
xyus
but 1.8vcore for 30secondsd ain't gonna harm the cpu that much ;)
updated: here's my 0520APMW sPI 32m stable:)
http://img342.imageshack.us/img342/6...apmw32m9la.jpg
current settings:
http://img342.imageshack.us/img342/1...ettings9vm.jpg
http://img391.imageshack.us/img391/655/2931wg.jpg
on stock cooling
Hey guys i`ve got a quick question regarding my temps. I put 1,425x113% on my 3200+ @ 2780Mhz , mbm reads 1,55-1,57v it fluctuates :( . Temps on load are 40°-42° on cpu 60+° on pwmic and 42°-44° on chipset. So here comes the questions :) : Should i remove the heatspreader (i`m a little afraid of it cause i`ve never done it before) and second question what can i do do stop vcore flutuations ? I will put a fan near the pwmic to cool it better, 60+° seem a little high, but now tell me your answers ;)
Edit: forgot to mention mb is DFI Nf4 SLI-D
Here's my Venice 3000+ 0517DPMW at 2908MHz@1,5v bios, DFi NF4 Ultra-D and 2*512MB Twinmos Speed Premium PC3200 264MHz@3.4v 2-2-2-5-1T with stock cooler:
http://xtremesystems.org/forums/atta...id=36437&stc=1
Your temps are good. If you remove the ihs, I doubt you'll get more than 2-3 degrees better. That's about all I got. The vcore fluctuating a little is normal. As far as pwm temp, mine never gets above 50 -52, but I've seen others with temps in the sixties. Putting a fan over it should bring the temp down. If you do decide to take the ihs off, some acetone will help soften the sealant, and make it easier to cut.Quote:
Originally Posted by ic3m4n2005
My E6 0530CPFW does 2.52@1.45, 280x9. Anything higher and it fails prime within a minute. No screens sorry, my mobo suffered a crash during a bios flash.
I have to work on my memory timings and get them a bit tighter but its doing OK so far at 10 X 290 t1 one to one. 3d stable.
hy guys! ;)
I've not got idea of how to get an stable and decent overclock with my A8N-SLI premium mobo, my Venice 3500+ core and my pair of Dimms--> 2x1024 OCZ PC 4000: 3-4-4-8 (PSU Enermax 480W kill noise, tower Kandalf by thermaltake, VGA: ASUS EN7800 GTX)
Now I'm running my system at @2651 (2200 default) with this config in bios:
Multi: 11x (Default 11x)
Vcore:1.550 V
Clock: 241 MHZ
DDR CLOCK: 400 MHZ at 3(Tcl)- 4(Trcd)- 4(Trp)- 8(Tras)- 11(Trc)- 16(Trfc)-5 (Trwt)- 3(Twr) 1T------> I don't Know if the Trc,Trfc an the Trwt values are correct because the bios autoset it to 400 MHZ with 2T and i set then to 1 T. What do you think about this? Should i change it?
DDR Volt. 2.80
Chipset Volt: 1.6
HT volt: 1.5
HT multiplier: x4
amd cool n quiet : Off
--------------------------------------->all is stable with superpi and mentest at @2680 and prime fails, but with this configuration prime95 is stable during 5 hours more or less (memtest and superpi o.k.) then crash :banana: .
my results in sandra are :
CPU: between Athlon 53 FX and Atlhon 55 FX-->11100/5425
Memory band...:6750/6650
my temps with my zalman 7000-B CU are:
Idle:43º
Full: 55º
Chipset: 126º fanless
I'm very confused about how i must to do the correct overclock.
What do you think about this config?
At this moment is the most stable config. in performance/stability but I think that is a poor overclock. :(
On the other Hand, clockgen say to me that my system is stable over 2690 but then prime95 fails.
Please post all your opinions and sugestions over this config and others that you think that could be better than this one and what i must to do or not to do...
Please help!!!
Thanks in advance and sorry for my poor and terrible english...Rob :slapass:
today i have received an 0531 BPMW
it does 2 ghz on stock voltage for now, but the psu is freaking out, i think thats the main problem, at 1.4V and 2.050 ghz it just freezed, raising up the voltage did nothing
at 2 ghz its stable but even at 2.025 its not
weird imho
just waiting for my new psu and i will give you some screens
how do you see its an E6 ???
Look IHS, it if ends in BW then it's an E6.
Through CPU-Z it should have stepping 2 (F F 2)
well im confused, my MB rates to above a 300HTT but i cant get it past 270 my mem is stable at 2.5-3-3-7 past 230 and the 3000+ is supposed to at least get 2.4, i cant get past 2.2, now the odd thing is that i cant max out everything at one time, BTW im relativly new to this OC thing, and at the settings below i have flashing on the screen, (it will flash black and than go back to normal. i can superpi it just fine so its stable, im confused. HELP!
http://www.xtremesystems.org/forums/...id=36859&stc=1
http://img148.imageshack.us/my.php?i...32stable3l.jpg
not tested further because i have strange issues
stepping 0531 BPMW
Great post, Friday afternoon, after work. Could end up in someones sig. If you need any help plenty of people here.Quote:
Originally Posted by GoThr3k
you mean, that someone could use my screen, tis a sucky screen i have some better right now
will use something on it, thx m8
it does 2.75 @ 1.5V stock cooling, NO airflow
No, not really what I meant but that is ok. 2.75@1.5v is good, but your right.. try to get a better fan/hs.
ah, you ment up that voltage and see what you got there
i know, normally i will put phase change on top of that middel october orso
0520DPAW.. n1 Stepping! :toast:
http://img355.imageshack.us/img355/5694/268s5et.jpg
DAMN 1.744 V, YOU GOT SOME BIG ASS BALLS!!!!!!!
AND CPU-Z UsuAlly TELLS YOU LESS THAN THE CORRECT VCORE ON DFI BOARDS......
BADASs
1.744 isn't that extreme for watercooling. Now, 1.8 would be. Anyway, nice clocks Gravedigga, that's very impressive for normal watercooling!