Come on over to visit me... it's frigid here! Got down to like -5C last night. We'll just open the winders :P heheQuote:
Originally posted by ctgilles
Got it up a bit ;)
*needs colder room* :D
Printable View
Come on over to visit me... it's frigid here! Got down to like -5C last night. We'll just open the winders :P heheQuote:
Originally posted by ctgilles
Got it up a bit ;)
*needs colder room* :D
My FSB with 8RDA bios 8RD13305 (NO Vdd MOD!!!)
http://digilander.libero.it/LunaRott...LES/My_FSB.JPG
Sandra is not important cause I can't use synch RAM/FSB...my XMS 333 doesn't work correctly over 205MHz...
...but FSB without Vdd MOD is very impressive!!!:banana:
CYA
u can go till 240 without mod in Async mode ...
Sorry, but I don't understand!!!
Could I go till 240MHz in asynch...but not in synch???
Help me for understanding!!!
CYA
P.S: Sorry 4 my english
219 no vdd mod?!north cooling?dual or single channel?can you run sandra or sup-pi at 219?
Single channel...only a 5x5 fan over the SPP's original dissy
Yes I can close Super PI & Sandra memory test, but my memory is asynch with FSB because XMS 333 doesn't work at 219MHz...so I setted them to 83% !!!
This is my screenshot with this configuration
http://digilander.libero.it/LunaRott...asynch_FSB.JPG
http://digilander.libero.it/LunaRott...uperPI_FSB.JPG
CYA
You will get higher performance running fsb/mem synched than asynch.... at 200mhz synch those scores in Sandra will be in the 2900 -3000(INT- Buffered) range.... try it. Do some benching of different apps like sandra/pcmark/3dmark/games synch( around 200mhz, or the best you can do synch), and I think you will see what I am trying to say B4E.Quote:
Originally posted by B4E
Single channel...only a 5x5 fan over the SPP's original dissy
Yes I can close Super PI & Sandra memory test, but my memory is asynch with FSB because XMS 333 doesn't work at 219MHz...so I setted them to 83% !!!
This is my screenshot with this configuration
http://digilander.libero.it/LunaRott...asynch_FSB.JPG
http://digilander.libero.it/LunaRott...uperPI_FSB.JPG
CYA
Quote:
Originally posted by muzz
You will get higher performance running fsb/mem synched than asynch.... at 200mhz synch those scores in Sandra will be in the 2900 -3000(INT- Buffered) range.... try it. Do some benching of different apps like sandra/pcmark/3dmark/games synch( around 200mhz, or the best you can do synch), and I think you will see what I am trying to say B4E.
Sure, I know what you mean, but I wanted to see where I could arrive with my FSB.
My RAM works max at 414MHz...so I coudn't test it with higher FSB!
CAS2.5 6-3-3
Below my screenshot in this case.
http://digilander.libero.it/LunaRott...ES/testram.JPG
CYA
Asus A7N8X modded
Sandra mem
3Dmark 2001
Ahhh much better B4E.........
Morkai nice fsb speeds :D
Looks like single channel ... still good:thumbsup:
Actually I think that's dual channel, but lower timings. I scored 10 lower on the Int, but scored 19 higher on the Float w/ my dual chan @ 2.5-7-4-4... so maybe he was using worse timings? Not sure.Quote:
Originally posted by muzz
Ahhh much better B4E.........
Morkai nice fsb speeds :D
Looks like single channel ... still good:thumbsup:
Deluxe@216, Corsair XMS with relaxed timings
Ok :) pay me a ticket Belgium - sysfalur's place :pQuote:
Originally posted by sysfailur
Come on over to visit me... it's frigid here! Got down to like -5C last night. We'll just open the winders :P hehe
Yes it's SC. 3th ram slot won't work above 220Mhz reliably when benching 3D, allthought pifast and sandra mem test work just fine 242MHz DC. (4-2-2-2 3.2V Kingston HyperX PC3000)Quote:
Originally posted by muzz
Ahhh much better B4E.........
Morkai nice fsb speeds :D
Looks like single channel ... still good:thumbsup:
Of course, leave it to OPP to leave no room for competition... like my generic PC2700 could stand a chance anyway.Quote:
Originally posted by OPPAINTER
Dual Kingston HyperX 3500s,, 256Mb sticks,, 3.1V,, 7-2-2 CL 2.5
Epox 8RDA,, Chipset voltage at 1.9V
OPP
OPP, do you run SETI? If so, how long does it take to complete a WU?
I can't even fathom what that would cost :P Btw guys.. I've got a plan to hit 250mhz dual channel with my setup. I aint done yet!Quote:
Originally posted by ctgilles
Ok :) pay me a ticket Belgium - sysfalur's place :p
VoraciousGorak: if you are intrested here is my seti@home times.
11.5X147
Memory timing 7-3-2-2.5
http://hem.spray.se/umeimak10/epoxnf...sandra/247.jpg
http://www.thenakedreview.com/forums...p?threadid=347
Barton 2500 AQUCA 0303VPBW
EPOX 8RDA+
2X256MB TwinMos PC 3200
HD :IMB 30GIG-7200
VGA matrox 4MB pci
PS:Antec 400W
Cooling: Prometiea
Win 2000 pro
Vddr: 3.02V
VDD :1.9V
Vcore:2.1V
Damn thats a lot of bandwith. :D
Chong
HI
8rda+ 1.0 A2 north (all mod), ddr3.1v, mem 7,2,2,2, 2700+ aiugb 0244
http://membres.lycos.fr/ftpad/images/3702.png
8rda+ 1.1 A2 north, vdd and vddr mod,
vddr 3.1v, vdd 2.1v, 1600+ agoia 4, mem 2.5/4/4/7
http://membres.lycos.fr/ftpad/images/memory-fsb-244.png
and with my new nf7-s 1.2 A3 north, and my 2500+ aquca 0303 vpbw
vdd mod 1.95v, vddr = 2.9 bios = 3.01, v-core 1.6v, mem 2.5/3/3/7
http://membres.lycos.fr/ftpad/images...NF7-S/3745.png
Excellent as usual Learn.....:thumbsup:
NF7 and Barton 2500 at 250x10, Kingston 3500 HyperX dual channel 3-2-2-2.5 timings
I can't seem to get it to run at cas2:( Does 3d mark and everything:)
OPP
Did I mention that I can get my ambient to -25°C :D heheQuote:
Originally posted by sysfailur
Come on over to visit me... it's frigid here! Got down to like -5C last night. We'll just open the winders :P hehe
i try :DQuote:
Originally posted by muzz
Excellent as usual Learn.....:thumbsup:
WOW :eek:Quote:
Originally posted by OPPAINTER
NF7 and Barton 2500 at 250x10, Kingston 3500 HyperX dual channel 3-2-2-2.5 timings
I can't seem to get it to run at cas2:( Does 3d mark and everything:)
OPP