FSB is maxed out @ 265 in BIOS ! ;)
I think SetFSB/ClockGen can give us more. :D :fact:
Printable View
FSB is maxed out @ 265 in BIOS ! ;)
I think SetFSB/ClockGen can give us more. :D :fact:
and what about the jumpers. maybe if they were set to boot at 266 it would open up higher fsb settings in bios. i dont want to have to get a top end cpu to get a good overclock, so i'm kind of eyeing that gigabyte board now. hopefully it will be cheaper.
someone needs to get one and do a full ocing review. i've asked aopen for a review sample about 3 weeks ago, but they ignored me :(
Locks are not working on that gigabyte 945 chipset baord, are they? Then what kind of overclock can you get?
Helow can you show me a 2001 score ?Quote:
Originally Posted by Staucher
Thanks a lot :)
Quote:
Originally Posted by BitpowerPM
isnt that 3445mhz for T2600 owners? Should be enough for me :)
Just tested my yonah T2600ES in a Dell laptop while I wait for 975.
It does superpi in 28.670 seconds! woohoo! The entire laptop uses 85 watts of power with dual prime95's going and charing the battery.
So far, I am nothing but impressed.
For you, and for almost anyone in the world :DQuote:
Originally Posted by irev210
A Yonah @ 3445mhz... it should be something like what... 3.8/3.9ghz FX60?
faintsQuote:
Originally Posted by Sesto Sento
An FX 60 with 3,8Gig under Air or Water i have not seen until today.
170er Opteron DCs 0550VPMWs seen with 3,1 to 3,2Gig under Water but never
3,8Gig.
Sounds like a true BIOS limitation, you know we have seen similar ones in the past. Like if the CPU is recognized as 100 MHz FSB you can overclock to 165 MHz, but if it's a 133 MHz CPU then you can go to 199 MHz. I guess it's the same here, maxing out at 266-1 MHz is not a coincidence.Quote:
Originally Posted by BitpowerPM
Why not pin mod it to 266 MHz FSB? THEN you'll start overclock in BIOS:toast:
Since it's a 975 chipset then it's made for 266 MHz, not like the crippled mobile chips.
Is yonah mp lockeD? only down or only up? could some1 tell me ?
I did not talk about the cooling necessary to achieve that 3.8/3.9ghz... I only said that a yonah @ 3.4ghz should have a performance compared to a 3.8/3.9ghz FX60 more or lessQuote:
Originally Posted by Rufus7
on the laptops it has speedstep ,multi can go down to 6.
dont know if the aopen board can adjust this in the bios.
Quote:
Originally Posted by Waus-mod
ok.... also heard that the 265limit = bios only!Quote:
Originally Posted by leejsmith
this is what i have waited for, if am2 doesnt come out big i'm goin to intel :)
buy yonah.... if am2 gets faster... sell it and buy am2 :D hahaQuote:
Originally Posted by metro.cl
Quote:
Originally Posted by Waus-mod
:slapass:
The ES cpu's won't be unlocked for upper multis?
:banana:
Woohaa :D
Got a T2600ES
Cant wait to put ln2 on it.
Nice Waus, very nice. Can't wait to see the results.
(Don't u dear to use it on Got's 3d competition :slapass: )
So the 975X board definately supports Xfire?
'cause I got the Aopen 975X board + an ES T2500 on it's way to pair with my X1900 CF - *hopes it works*. Might need to break out my p4 heatspreader again.
One more thing - this may sound stupid but, why is there only one core on the chip? They both integrated into one?
hmm 12*265 = 3.18GHz
I don't think that bus will limit me too much in terms of overclocking.
mem can do 3:4 3-2-2-4
Anyone know if the board lets you adjust the multi?
you lucky bugger..........hey with the core all in one....now it looks the same as AMD :) looks like Intel's finally worked it out to knock these up properly instead of bolting a couple of cores onto CPU PCBQuote:
Originally Posted by wwwww
Quote:
Originally Posted by dinos22
But lotsa cores is so much more polite when she's naked and you're mounting a largish heatsink on her.
Oooo can't wait, should come by next Friday.
You're from OCAU right?
Now what to do with my ES 955x, OCAU doesn't let you sell ES' there, people on atomic PC can't afford :P and people on XS make me ship overseas :(.
Got the Aopen and the Yonah from the same dude who got me my ES 955x - this guy seems to have connections :P
I'll check if he's got anymore - but I wanna do my benchies first - if I can get within #10 of 3dmark01 I'll make me a happy man :P
why cant you sell ESs on OCAU?
IDK, it has already gotten close to that on air :DQuote:
hmm 12*265 = 3.18GHz
I don't think that bus will limit me too much in terms of overclocking.
I hope clockgen works, I want to see this thing sub zero at 4Ghz!! :banana:
Well it's an ES so hopefully I can up the multi.Quote:
Originally Posted by idiotec
I'll be shoving it under my old loop that struggled to cool the Presler (storm+bix120+swiffy mcpsomething)
Quote:
Originally Posted by ZX7891
They say Intel owns em or something.