I actually got those for $190 CDN (which is about... $165 US atm).Quote:
Originally Posted by Simani
Printable View
I actually got those for $190 CDN (which is about... $165 US atm).Quote:
Originally Posted by Simani
Coming up new Tests :)
Why can't Use my new GEIL ULTRA-X PC4400 with MSI NEO2 NF3 more than 250MHZ 1:1 ??? I'm instable at more frequences....Isn't compatible with this Mboard ???
you not have emperor IC, you have tccd IC ;)Quote:
Originally Posted by DioSpada
I was able to overlock memory at 450 with 1.5-3-3-5 timings. //Default timings are 2.5-4-4-7, or something like that // ;)
In case A64 is not showing correct valueas, I giving bios numbers.
CPU FSB 225
Voltage 1.45V (propably could be lower...)
DIMM 2.8V
Tcl-1.5
Trcd-3
Tras-5
Trp-3
Trc-7
Trrd-2
Twr-2
Twtr-2
Trwt-2
http://symantec.times.lv/Emperor/225-1%201.5-3-3-5.JPG
http://symantec.times.lv/Emperor/225-2%201.5-3-3-5.JPG
http://symantec.times.lv/Emperor/225-3%201.5-3-3-5.JPG
http://symantec.times.lv/Emperor/225-4%201.5-3-3-5.JPG
http://symantec.times.lv/Emperor/225-5%201.5-3-3-5.JPG
Quote:
Originally Posted by DioSpada
I even tryed to feed this memory with 3.5 Volts of energy :) End now they are still working, so basicaly.. YES this is good one form GEIL. But in this chips I got feeling, that the lover voltahe the better memory likes it, not like some Winbond UTT chips who required a LOT of voltage.
TTCD ?? you mean Winbond UTT (requires high vdimm)
TCCD on the other hand doesn't like high voltage at all.
Yeah, sorry, was in a hurry this morining. Ofcourse I ment Winb UTT :)Quote:
Originally Posted by Jaco
For GIGI77 ??? My new GEIL ULTRA-X are not EMPEROR but TCCD ??? Are you sure ??? The serial is: PN1730-SN6000012....
I Have crash of the system "riavvio" in Italian, if i use PRIME 95....It's stable .only with 166 divisor and RAm at 250MHZ CAS 2.5-3-3-7 or 2.5-4-4-7.....Il i set SPD the timigns are 2.5-3-3-5...Are TCCD my ram ???
Why can't i use at more frequences with MSI NF3 ???
Thanks
I'm not sure I've got a set of these Emperor modules :
PN 1799 SN6000069
SPD timings are 232MHZ 2-5-5-9 / 250 2,5-5-5-9
Can anyone confirm ?
Yes this must be Emperor..have fun :toast:Quote:
Originally Posted by Jaco
thanks Ianocean, but I don't have much luck with these Geil sticks.
I guess I must have a setting wrong.
trp = 2 is a no go , 2-3-3-6 is the best it can do.
I can't boot over 220Mhz with cas2.
I'm currently testing 260Mhz 2,5-4-3-7 2,84vdimm.
drive strength 7 / 3 gives best stability (or so it seems )
See screenshot for the settings.
@Jaco boost the VDimm up to 3.0v -seems that voltage is sweet spot...but use some active cooling
max async at 7 is pretty tight also might wanna try 8
Thanks for the tips, guys.
I've got 265Mhz 2,5-4-3-7 @ 3,0v 95% stable (error after 2h30m prime )
The sticks get really hot at 3,0v , even with active cooling.
I'm giving them a solid burn-in , hoping for a few mhz extra :D
@Jaco...an advise do not burn it over 2.95v and do not exceed 3.1-3.15 when benching
Well, I was able to get till 295Mhz and runing sure stable.
But before you say 295 Mhz is lame - look ar the NUMBERS of Super PI calucaltion (it`s faster, then some guys could do on 30X Mhz) and for example Everest REad performance, and memory latency. :) Only stuff, I would like to beter Write performance of the memory.
Propably you could somehov give me idea, how to improve this performance? Oh yeah.. memory voltage 3.0.
P.S: Tryed even 3.5Volts on stick.. they are still runing and no smoke :) LOL
http://symantec.times.lv/Emperor/295-1Mhz-2.5-4-4-7.JPG
http://symantec.times.lv/Emperor/295-2Mhz-2.5-4-4-7.JPG
http://symantec.times.lv/Emperor/295-3Mhz-2.5-4-4-7.JPG
http://symantec.times.lv/Emperor/295-4Mhz-2.5-4-4-7.JPG
http://symantec.times.lv/Emperor/295-5Mhz-2.5-4-4-7.JPG
Any NEWEGG Link for these STICKS?
very impressive so far..
Will be interesting to follow
I myself ordered some cronus team xtreem, but these also look pretty good..
yeah the Emperor doesnt do trp 2.Quote:
Originally Posted by Jaco
but with 2.5 it flies.
targ
Looks like some interesting DIMMS. Any word on pricing?
:) not bad results.
go UP
luigi
I picked up a set. I like them, but have not played with them too much. I will try them out and post some SS.
gigi77: What's the highest you got them to run a cas2 and could I see your settings at that speed for the bios? I've run them through memtest at 2-3-3-6 at 260, but not in windows yet where it really matters. And if you did not already do so could you post your 300 timings for bios. Please. :) Thanks again.
My 300mhz timings with dfi nf4
:)
Luigi
CPC = Enabled
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 4
Min RAS# Active time(Tras) = 7
Row Precharge Time(Trp) = 4
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 15
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 2
Read to Write Delay(Trwt) = 3
Refresh Period (Tref) = 3210
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = auto
DRAM Data Drive Strength = auto
Max Async Latency = 8ns
Read Preamble Time = 5ns
Dram time = Normal
Idle Cycle Limit = 16
Dynamic Counter = Enabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)
What about memory and CPU voltage? Can you provide some morde details. :confused:Quote:
Originally Posted by gigi77