Printable View
http://www.xtremesystems.org/forums/...6&d=1137433529
I guess mine is not a great overclocker, or maybe I need to upgrade my power supply. Anyway, here's a screenie. This OC is the most stable, running any possible bench you can think of with any problems what so ever. I may upgrade to a 940 when the second batch comes out. Thanks.
I assume that you use Aircooling?
Quote:
Originally Posted by NiCKE^
Nope, water.
Ah okey, will update first post.
How can I run my memor 1:1?? My BIOS chioces are DDR2-400/533/600/667/800 and non of these give me 1:1. Thanks.
FSB200 / DDR-400 = 1:1Quote:
Originally Posted by nicepun
FSB233 / DDR-466 = 1:1
FSB266 / DDR-533 = 1:1
FSB300 / DDR-600 = 1:1
First you set your FSB and then the DDR2 :)
Aaaaaaaaaaaaaaaahhhhhhhhhhhhhhhh I see said the blind man, thanks.
dammn thats a helluva scoreQuote:
Originally Posted by nicepun
that ram's really helpin ya out :)
No, it's almost definitely the SSE3 hack that's helping him out...that should be a 29 sec or greater.
I don't want to rain on the parade, but if he was using SPi 1.4 Mod, add 3 seconds to that score ;)
nicepun, that is also decent clock for that Vc on air. I wouldn't go over 1.50Vc on my 930 either, but as I have come to find out Vc is really what you need to get the Preslers/Cedar Mills moving....assuming your cooling up to the task of cooling the extra heat.
Also, close all that junk running in the tray before doing a SPi!!!
Good luck with it...
nicepun run the correct version of super pi that would be mod 1.4 version
The one you are running now is meaaningless As a matter fact all you guys need to run Super Pi 1.4 mod andf run it at 32m a little more stability test too
I am impressed with what I am seeing here in this thread...... So keep it coming people
I believe with the 1.4 mod he would be at 30.500 to 31.500 somewhere in there. we will know when it is run right!!
WZ
I need the link for 1.4 Mod cuz I can't find it. Also I'm on WC, I guess my chip sucks because unless I go over 1.45, it will not be stable pass 277. Max temps are 48c.
Gautam, you are right my friend, I just ran 1.1a and I'm at 30secs.
I'm either doing something wrong, need a new PSU, or plain and simple this chip sucks.
SuperPi Mod 1.4
http://superpi.radeonx.com/super_pi_mod-1.4.zip
Quote:
Originally Posted by Chri$ch
link no worky
oh, sorry....
here is it....
nicepun
try to use the 0519 bios and pump the vcore to 1.48v
and how about the other vsets?
chipset,ddr2?
Somebody run PCMark04, 05 with 4 sticks of ram ?
Tell us if there is a difference compared to 2 sticks.
I believe that would be interesting for this thread, does'nt matter what cpu used as long as its Presler/Cedarmill or even Prescott. :)
Quote:
Originally Posted by PcCI2iminal
Are these the same BIOS found in the cd that comes in the Asus box??
No, search the forums or Google. I think only 606 is on the ASUS website now (519 was the previous one), but they may have old ones stashed on the FTP servers somewhere too? If you can't find a copy, let me know and I will upload it somewhere.
Quote:
Originally Posted by boostedevo
Would you mind uploading a copy. I messed up and flashed the one from the CD and now it won't POST. I already ordered a new bios chip, I'm going to install my RD1 BIOS Savior for future flashes. I know whatever bios is on the CD is not compatible with the CPU and that's why it's not posting. Now I'll have to wait a few days. I'll post later on with my results. Unless some one has an extra bios chip laying around that I can off ya (with the bios included of course). Thanks.
PcCI2iminal - Vcore is 1.45v, DDR2 is 2.3v, and both chipsets are on auto.
To the guys that are using H20 for cooling, what are your temps?
Oh man, guy in another forum just went through that with a BIOS that wouldn't POST with a Presler. I hope you have a 5xx/6xx/8xx around to do the flash or I think you will be stuck until that new BIOS chip arrives. ALT+F2 on boot didn't even work for him.
I put 0519 up here, but it's not permanent, so let me know when you grab it so I can remove it.
Good luck with it...
*Edit: Presler 930 on water (20-22C ambient):
Default Vc/3.00GHz default: 24C idle/27C load
1.50Vc/4.2GHz: 27C idle/34C load
Cedar Mill 661:
Default Vc (overvolt idle = 1.36V)/3.60 default: 28C idle (22-24C) and I can't believe I didn't note load ;)
1.475Vc (overvolt idle = 1.51V)/4.86GHz = 27C idle / 48C load (19-21C ambient)
The 661 got definitely higher load temps @ 5GHz even and the 1.525Vc...shot up to like 54C.
Quote:
Originally Posted by boostedevo
Yep, No ALT+F2 at all. And no, I don't have any other cpu (Socket T anyway) laying around. No problem, I need to study for an exam anyway and this take this distraction away, at least until the bios chip gets here. Did that guy order a bios chip as well??
Yeah, that stinks. No he didn't order the chip...luckily another forum member (there and here) with a spare 6xx proc lived close enough and was nice enough to go over and help him out.
Good luck on your exam ;) My new PSU should be here tomorrow and I have my fingers crossed it's going to help a bit. Gotta love when you see a PSU shipping weight of 9 pounds...should be a good one, lol.
Quote:
Originally Posted by nicepun
try NB = 1.65v and GL with school and 0519
I may have to reseat my water block, cuz I'm getting temps way higher than yours. I had a feeling there was something wrong there and that might be preventing from getting a better OC as well. Hopefully I'll have something to post by the end of this week or the weekend. Laters.
Edit 1: I just finished reseating my water block and in fact, it wasn't properly seated. We'll see what happens.