Oh and with XP SP2.Quote:
Originally Posted by dinos22
Printable View
Oh and with XP SP2.Quote:
Originally Posted by dinos22
Hi LV, as you must know i hav a KHX3200 339we.
The thing is that mine´s do 289 2-2-2-0 3,86v spi 1m on a SLI-DR. I´ve been trying with upper vdimm (up to 3,99v) reaching 293-294fsb with systool but spi crashes in the middle loops.
http://img270.imageshack.us/img270/7...838v6rr.th.jpg http://img270.imageshack.us/img270/4...aker6uh.th.jpg http://img270.imageshack.us/img270/8950/2963ek.th.jpg
I saw that your memories tolerate well 4v, did you noticed similar things before you burnt the memos?
Thanks.
I have stil not burned in my memos, only 8/7 use with nf2 before.Quote:
Originally Posted by Xevipiu
Mine´s have never been burned. Were bought from a guy that never oced it. I will try to burn them on a AN7 3,2v 1-2 weeks to see if i gain something on nf4 later. Right now they´re doing 265 3,23v (nf4).Quote:
Originally Posted by Lastviking
265mhz 2-2-2-0 1T 3.23v
http://img84.imageshack.us/img84/469...51mb0jd.th.jpg
Regards
LV, what can the sticks do @ 3,2v? 20c room temp :slapass:
mines:
http://desertshooter.nl/268.jpg
Sticks that do high mhz on low vdimm dont always mean they do high mhz with high vdimm :fact: , but i will try it later.Quote:
Originally Posted by DesertShooter
I still think there's only a SMALL window that this is possible @. It takes a totally optimised install with some very good HW. I just don't do the "optimising" part :p: Here's the best I could do:Quote:
Originally Posted by dinos22
http://img437.imageshack.us/img437/4...31mtwk50li.jpg
http://img437.imageshack.us/img437/6585/11x2741m0nc.jpg
Now that I look at the numbers, there may be a better possibility with the Expert, but mine's dead :rolleyes:
You guys should try harder:cool:
There´s with 2*512 Mushkin blII:toast:
http://img351.imageshack.us/img351/6810/269846ay.th.jpg
Tomorrow I´ll try with 2*256:p:
Here the "2x512Mushkin3500LevelII" 340wf of my old friend KrampakQuote:
Originally Posted by FriGidi
Very good memosQuote:
Originally Posted by krampak
Damn, 300Mhz 2-2-2-5 is extreme :toast:
Nice work m8 :slobber:
Congratulations. That is some awesome speed:D
wow :toast:Quote:
Originally Posted by FriGidi
it should be interesting to see these sticks next to a dottie:hrhr:
nice work btw :banana:
Nice sticks u got there LastViking !
:slobber: :slobber: :slobber:
BH-5 For Life
Nice bench :)
Wow !! :shocked:
whats your highest mhz with TRP @ 1? :D
I will try when i got my new board and some another stuff, Tryied 301.5 yesterday but its hard i did about halv of the super pi1mQuote:
Originally Posted by STEvil
AWESOME!!!
Is there any way that I can see the complete timings on your A64 tweaker? :)
All the timings that i have changed are in the screen the another ones are stock.Quote:
Originally Posted by g0dM@n
@lastvikingQuote:
Originally Posted by Lastviking
whats the trick to get over 3.8v stable?
please tell it us
Right sticks and some cold air and dont use paint before you got a good score, paint will make super pi fail if you dont reboot after you have use it.Quote:
Originally Posted by blander
AD0 board on the way to me now, but the temp outside is hoter now :/
I stil have problems with 3.85v-> stabilty with 2x512mb (and thats with muskin,corsair,twinmos sticks)
helps a burn in with 3,8V or more ??
We were trying 3.98v and it was stable, without loosing performance. The truth is that it surprised me! It's a pity I didn't try more than 4v
cooling: 1x Delta 120x120x38 4000rpm 190cfm (+60db :( )
Regards