955XE Dual Core @ 6+ Ghz on Vapo

what temp does the chip reach under load?

Very nice results :)

These 955XE Dual Core's really start to impress me:eek:

Will try to test mine in a cascade (overklokk`s) when I get it.. about 10 days left I believe.

Quote:

---

Originally Posted by FUGGER

I can do 3D at 5.8Ghz

At 5.6hz I can run stuff straight through without worrying about vapo dropping temp.

This chip will not make it to 8Ghz but I do have a good shot at breaking 7Ghz

---

thougt so, but nevertheless a sweet chip charles!
now push it some more and squeeze every drop of mhz out of it until it whines and begs for mercy :cord: :hehe:

ps, charles, whats up with that ugly font you set for spi? :P
set it to "comic sans" :D

Quote:

---

Originally Posted by FUGGER

This rig is set to be a killer 24/7 HTPC gamer with ATI cards.

---

for a htpc id rather recommend a yonah unless you like to meditate and like that hypontic humming comming from the cpu fan :D

Quote:

---

Originally Posted by mikeguava

I have had several Retail and ES chips - with great and mediocre results on either side - don't think it'll make any difference

---

from what i know, yeah.
early es chips oc little to significantly worse, but since those chips will be launched soon they are not early samples.

Quote:

---

Originally Posted by afireinside

kyosen ran some 01 at 7.2 on a 670 ;)

Hurry up with the 3 stage!

---

dont get your point...
i bet that chip did way better than 4.8 benchmark stable on a vapo
4.8 to 7.2 is a 40% jump
from 5.8ghz to 8ghz is also a 40% jump.
vapo to ln2 doesnt give that big of a boost from what ive seen.

Quote:

---

Originally Posted by saaya

dont get your point...
i bet that chip did way better than 4.8 benchmark stable on a vapo
4.8 to 7.2 is a 40% jump
from 5.8ghz to 8ghz is also a 40% jump.
vapo to ln2 doesnt give that big of a boost from what ive seen.

---

I'm pretty sure what hes trying to say is that Kyosen benched a 670 at 7.2 so strap taht 955XE to his 3 stager and see how it goes.

EDIT And imo along with many others goign from a vapo to LN2 is a huge jump. Look at a dothan doing 3-3.1 on a vapo then 3700+ on ln2 or a p4 doing maybe 5 gigs to 7.4. Huge jump if ya ask me. And 5.5 to 8gigs is about 40%

Quote:

---

the highest 2k1 run is at 5.5ghz?
i dont think 8ghz is possible even with ln2 if the max bench speed is 5.5ghz with a vapo.

---

Sorry I must have read it wrong. You ment fuggers highest is 5.5? I thought you ment 5.5 is the fastest P4 to run 3d.

Vapo to ln2 is MASSIVE. You're going from -40c on a low mass evap that loades in the positives in windows to a LARGE mass ln2 unit that can have anywhere from -190c to -19c on the base.

Come on FUGGER got any results yet from under the 3 stage cascade?

This rig is set to be a killer 24/7 HTPC gamer with ATI cards.#fugger
so what would you suggest for a gfx upgrade? x1800xt or 7800 gtx/512 ?
which would give most? anyone?

what about some 5.6ghz pcmark05 score?

Quote:

---

Originally Posted by FUGGER

I use ati tool to kick fans to high and use winclk adjust both cards at once. I bump them up to 553/600 as I know this is a very safe speed to get benches off at.

http://www.xtremesystems.org/forums/...1&d=1135238627

---

Wow is that not the highest GT1 score to date??

Quote:

---

Originally Posted by saaya

the highest 2k1 run is at 5.5ghz?
i dont think 8ghz is possible even with ln2 if the max bench speed is 5.5ghz with a vapo.

---

Hm, think so too.
But maybe its possible with cedar mill?
Hope i can test mine under phase change within the next days =)

Quote:

---

Originally Posted by LardArse

Wow is that not the highest GT1 score to date??

---

remember Kyosen, 700fps in Wings of fury!!! :D

http://service.futuremark.com/compare?2k3=4432737

Quote:

---

Originally Posted by dpa

remember Kyosen, 700fps in Wings of fury!!! :D

---

That's damn extreme! But FUGGER's dangerously close and running over 1500MHz lower.. We could very well be looking at a new record soon :)

Awesome results fugger im lovin it :)

Setting vcore to auto I can bench at top speed on the vapo. I am set to + .1v on vr

Check out the lobby high (passed kyosen), still dialing in. poor car chases though
http://service.futuremark.com/compare?2k1=8838696

http://www.xtremesystems.org/forums/...1&d=1135555766

Amazing, give intel the WR back Fuggie :P

really nice results iam impressed man..keep going

Anyone going to be buying one in the future?

hi, i'm new here.

framesx2x /viper B2S.

i just got my new rig.


Asus P5N32-SLI
840 dual core 3.2
2x Cairsor ddr2 5400pro 667/ 1m
2x LEADTEK WINFAST PX7800GTX TDH MYVIVO EXTREME DDR 256MB PCI-E
2x WESTERN DIGITAL RAPTOR 74GB WD740GD SATA 10000RPM 8MB HARD
CREATIVE LABS SB0466 X-Fi FATAL1TY EDTION 24BIT 7.1
DVD RW hp

water cooling on my 7800s.
UPS monday or tue VapoChill II BLK w/775 block.

Help? (Q) 2

1- what bios do i need to overclock above 4gb
2- what driver to use w/7800s

help. please.

sorry f posting twice

You should max out around 3.68Ghz on that rig factoring in the 30% over stock on average rule for that chipset.

There is one person who has broken 230FSB for benches on a 200FSB processor. Larsk


My thread on that mobo, I have tested it and previous rev's
http://www.xtremesystems.org/forums/...ad.php?t=80796

hi fugger.

what about 14x266. can change the multiplier
i know that 16x230 = 3680
is this board o.k. f gaming .
what about the bios, is there and update so that oc can be better.

viper BF2S

45K done 750/820

http://www.xtremesystems.org/forums/...1&d=1135812030

http://service.futuremark.com/compare?2k1=8838925

If you get to 266FSB let us know.

so this board is no good for oc at all, is what you saying fugger.

so exchange for the P5ND2-SLI Deluxe, board

My P5ND2 thread
http://www.xtremesystems.org/forums/...ad.php?t=67173

Here is the Gigabyte version
http://www.xtremesystems.org/forums/...ad.php?t=76566

Please read the threads