Printable View
morphling,
great core, you lucky #@! ;)
So far most of the crappy J cores have been with -C or -G and they really dont seem to be that great, around 2-2.1G aircooled.
You have a -H one which seems to be a lot better. But I wouldnt go out and say there are a lot of these J CPU's which are this good or even close.... i'd take an A- CPU every day if I had to take my chances!
Wow 1700@2.7GHz+ :eek: !
Congrats, morphling ...
BTW do you have pics of your current cpu wb ???
Hehe thanks, and I have one one the table that I'll air cool as soon as I make heatsink, and this will be my first air cooled machine in three years :D
And this is the main reason for my overclock:
http://www2.arnes.si/~mlivak/Unlocki...ture%20034.jpg
I take it back. With a design like that, it is possible to see the performance you are claiming (thought you were using an open channel block?
Looks like one killer wb :slobber: ... I would really like to see a comparision between yours and Cathar's White Water ... :)
What is the height of the fins and the base thickness, if it's not a secret of course ? Also what size is the tubbing 1/2" or 3/8" ?
Hey talk metric, you're from Bulgaria :D
Currently 4mm fins 1mm base, that worked realy well on palomino core, tomorrow I'll try 4 and 2 for much smaller tbred.
As for comparison, I'm thinking of sending one to Bill for overclockers.com waterblock roundup, but I currently can't spare 100$ for that. A little later.
Ah, thanks for the info :toast: !
I'm sure yours will be one of the best, if not the best ;) ...
Holy.....oh my, 1200Mhz OC, what else can I say...
Wayne's vioce: ~I'm not worthy~~~~
Whats the distance apart the mounting holes have to be? I have a few designs I want to build and have been unable to find the specs.. 8-/
Im thinking 70mm x 45mm by looking at the pic..? I will have my 8K3A+ in hand soon enough, but if I can get a head start on tearing my system apart, that would be a good thing.. thanks in advance.
:slobber: :slobber: my 1700+ go only to 2400MHz @ to 2.2V :( ........ I must one also in such a way have :slobber:
Yes looks like we are very lucky in slovenia right now...
http://www.muha.cc/malecky/cool.JPG
this is with 1.96V cooled with a volcano 7...when I run Prime95 it freezes at about 55°C on my KX7 socket diode:(
still very very good... I will be trying a 100% OC next week if I get the mobo to do it..the cooling is a secret:cool:
http://www2.arnes.si/~mlivak/holes500.gifQuote:
Originally posted by STEvil
Whats the distance apart the mounting holes have to be? I have a few designs I want to build and have been unable to find the specs.. 8-/
Im thinking 70mm x 45mm by looking at the pic..? I will have my 8K3A+ in hand soon enough, but if I can get a head start on tearing my system apart, that would be a good thing.. thanks in advance.
So 66*33mm is what I use for sckt. A
Ha ha ha, my poor xp2200 tbred B just hit 1900mhz, 45° with an alpha 8045...lol.
Now, I'm even wondering if I should not sell my 2200 to get one 1700,grumpf.
Holy "cow" :cool:
....Hmm may have to get one of them, to go along with my new water-cooling, just to save me until the Hammer
hows about 3ghz? lol :p
New block getting ready :D
http://www.xtremesystems.org/forums/...2240#post92240
morphling can you please post your full cpu code ?
*phew*...Quote:
Originally posted by KnightElite
That is correct. Thoroughbreds start with AXDA, Palominos with AX.
Amazing clockage morphling1.... I want a new CPU now :D.
Just checked komplett here in Sweden and found:
AXDA1700DLT3C
for app. €70
Tricky time now, the Bartons are almost on their way. Should I take a chance on the 1700+ t-bred B or wait for the Bartons? Decisions, decisions... ;)
Scyphe, You know that 1700 Is a tbred A and not a tbred B right. The Bs ends with D"U"T3C.
That shoudl be visible right, I was wrong about week, it's was actualy 51 and as you see both cpu are almost identical 4 serial numbers apartQuote:
Originally posted by Milka
morphling can you please post your full cpu code ?
http://www2.arnes.si/~mlivak/Mk4/cpus.JPG
Thanks for the diagram, morph.. 8-)
Are either of those for sale? Hehe 8-)
My chip is similar.. but green :banana:
Are you chilling the water? I remember seeing something about 15C water. How ya doing it? Also around how much it cost you to make one of those blocks? ;)
Quote:
Originally posted by luihed
Scyphe, You know that 1700 Is a tbred A and not a tbred B right. The Bs ends with D"U"T3C.
Oops, thanks for telling me. Almost made a mistake there... ;)
Just open window a little :DQuote:
Originally posted by Lithan
Are you chilling the water? I remember seeing something about 15C water. How ya doing it? Also around how much it cost you to make one of those blocks? ;)
For blocks PM if interested.
Little progress on my air cooling project I hope I'm finish it tomorrow so I can test overclockability of my second 1700+.
80*80 mm copper mamoth :rocker: :rocker:
http://www2.arnes.si/~mlivak/Air%20cooler/MK%20air.JPG
LoL, maniac! :)