I have those here, im reviewing them now to TPU, i couldnt do 800mhz 333, but at 444 these things go above 800.Quote:
Originally Posted by SlackerXL
Printable View
I have those here, im reviewing them now to TPU, i couldnt do 800mhz 333, but at 444 these things go above 800.Quote:
Originally Posted by SlackerXL
I have an interessting quote out of the review:
Seems like that the D9's found their master ;)Quote:
While the benchmarking numbers were nearly identical the Elipda IC's that Mushkin uses are by far better overclockers at tight timings than any Micron Rev A IC's that we have seen.
I wouldn't say that,Quote:
Originally Posted by WoD
400 @ 3-3-3 is far from impressive.
Both my pairs of Fatty's do around the 380 level @ 3-2-2 and to around 466 @ 4-2-2.
I'd still go Fatboys over them if cost wasn't an issue.
Could someone make a proper list of all ddr2 mem orso with D9 fat body. And not only the brand name but includig the rev. of the mem so it easyer to find!
:confused: where can find it.Quote:
Originally Posted by WoD
Quote:
While the benchmarking numbers were nearly identical the Elipda IC's that Mushkin uses are by far better overclockers at tight timings than any Micron Rev A IC's that we have seen.
Here you go: http://www.legitreviews.com/article/294/9/
Are those mem using fat D9 chip?
http://www.newegg.com/Product/Produc...82E16820220055
http://www.newegg.com/Product/Produc...82E16820145590
Thanks.
also remember all they could get was a screenie, i got cpuz to open at 400 3,3,3, but... paint froze.Quote:
Originally Posted by WoD
Corsair TwinX-UL PC8000 1048MB Dual-Kit
CL5,0-4-4-9 @ 533MHz/DDR1066
OCZ EB Platinum Rev2 PC5400 DDR2 1024MB Dual-Kit
CL4,0-2-2-8 @ 333MHz/DDR667
Patriot LLK PC6400 DDR2 2048MB Dual-Kit
CL4,0-4-4-12 @ 400MHz/DDR800
Just ended my search for these chips, can any one confirm if these are Fat body D9?
YesQuote:
Originally Posted by Vassili
YesQuote:
Originally Posted by Vassili
Don't knowQuote:
Originally Posted by Vassili
Will I be able to run 4x512MB @ a AOpen i975Xa-YDG(or other 975 chipset) I hope 975 chipset does not have probs running 4 sticks.
Does that have any other disadvantages? Like 2T @ socket 939? Or less overclockability?
Nope, somehow, don't ask me how, but my 955x seemed to o/c the mem 8MHz more on tight timings when using 4 sticks over 2 sticks.Quote:
Originally Posted by Vassili
Either way, D9s are 64MB chips - so on K8s, if they were DDR they'd run 4 sticks 1T without a problem anyway.
:confused: I have saw that some modules have 128MB chips of d9dqt,it's fatbody:p:Quote:
Originally Posted by wwwww
http://www.legitreviews.com/article/258/13/
How it comes that the Crucial fatbody is that bad in the review?! They doesn't even reach 1000Mhz.
*****
http://www.pcmoddingmy.com/e107_plug...?content.275.2
I thought the Patriot PC2-5600XBLK is using the better BT-3 D9 version and not the BT-37E ones?! Well, probably there isn't any noticeable difference between these chips.
What do you think? Witch is the memory to look for at the moment? It should be 1GB sticks...
Because I have no real idea and I don't want to annoy you anymore ;)
i have the 6400 patriot kit, i htink it used the 4ns part opposed to the 3ns
Could the Corsair Twinx PC2-5400C4 also contain Fat Body D9 ???
http://www.anandtech.com/memory/showdoc.aspx?i=2700
New fat bodies out :)
Those are still 3ns, i'll wait for the 2,5ns D9's :toast:Quote:
Originally Posted by WoD
Thats not new, that is Micron BT-3F and it too is EOL.Quote:
Originally Posted by WoD
you sure?
according to anand micron is producing them again for ballistix
So I've been running this 8000ul @ 2.4v 1000MHz, 4,3,3,8 for a few weeks now and just Vdimm modded my P5WD2-e. Jacked it up to 2.5, 2.55, 2.6, absolutely no increase in performance, can't even trim off a clock anywhere.
I thought these D9 fatbodys could clock 4,2,2 @ 1000. Any ideas. Need to trim off 1.2s off my SP32m. Want to avoid removing the spreader to check which rams are installed. Any ideas what's going on?
Heey guys, what you think of this memory: http://www.supertalent.com/SuperTale...?PN=T800UX2GC4
It is said that it will be the next king of the hill.
The Super Talent stuff is very nice ram. Micron based and built this year.
I have samples here, unreal 1+ ghz stuff.
could that do cl2.5? possible?:slobber:Quote:
Originally Posted by FUGGER
Thank you for that information. I'll wait to be released and I'll buy one or two kits. Can you tell some more details about the timings and frequencies that this RAM is capable. I want to know also how is the overclock if are used 4x1GB sticks. Thank you in advance.Quote:
Originally Posted by FUGGER