New GEIL ONE S the ONE!

@gravedigga,

Geil One S for users reached 290-295Mhz 2,5.3.3.5, 300 2.5-4-3-5, bios 510-3 or 623-3

luigi

Ok thx, we will try.

hi,

iam the "friend" :P

with bios 510-3 an these settings i have "my" 10x300FSB 1:1

DFI Ultra-D Bios:
2,5-3-7-3-7-14-3-2-2-3-3072-auto-enabled-decrease Skew-255-level7-level2-8,0-normal-5,0-256-disable-16x-7x-disable

so memtest runs from 2,5vdimm to 2,9vdimm with no errors (just 10 loops)
i can boot to windows from 2,5vdimm to 2,9vdimm.

but whatever i do....SuperPi wont finish 1M....not exakt blah blah.
(Prime also stops at a few minutes)

anyone some "tips" ? :(

Did you try to raise Vcore?
What is your LDT at?, set it manually to 3 in bios.

Try messing with read preamble/max async latency, this made a difference for me.
What DRAM response time are you using in bios, try to put it one step lower like from "faster" to "fast" or from "fast" to "normal".

yep, vcore 1,6v LDT was 4 sure 3 ;)
my cpu runs with 1,44 primestable @ 3000mhz

for testing i used only 9x300 to be sure the cpu is not the problem.
response time i have "normal"....
2,5-4-3-7 and super pi and prime runs :(

how can i become the little "3"

@CRF250

Try Drive Strength - 8. Data Strength - 1, Preamble -5.5ns

Maybe even trtw - 2 and remove skew, see if it helps at all.

Quote:

---

Originally Posted by CRF250

yep, vcore 1,6v LDT was 4 sure 3 ;)
my cpu runs with 1,44 primestable @ 3000mhz

for testing i used only 9x300 to be sure the cpu is not the problem.
response time i have "normal"....
2,5-4-3-7 and super pi and prime runs :(

how can i become the little "3"

---

only chosen geil can do the 3..aka geil rep only and prolly 1% or less on retail ;) that's why bachus asked if gigi tried more than the kit he had from geil

gigi, i want to have your great rams, now :)
My Geil ONE S 1024MB kit tops out at 308 2,5 4 3 7
Drive strength 7 (guys, test everthing from 5 to 8) / Data strength 1
http://www.xtremesystems.org/forums/...id=39231&stc=1
2,5 3 3 6 is memteststable, but not stable enough for prime or sp.
Using my ocz 4800 platinum kit (TCCD too, no version printed onto the sticker) with the same system 264Mhz 2,5 4 3 7 is the highest stable memoryclock.
Thx Geil.

My Friends,


Geil One S is Perfect ram for price and perfomances :)

300 2.5-4-3-5 is normally run for this ram.

Quote:

---

Originally Posted by MMIQHW

gigi, i want to have your great rams, now :)
My Geil ONE S 1024MB kit tops out at 308 2,5 4 3 7
Drive strength 7 (guys, test everthing from 5 to 8) / Data strength 1
http://www.xtremesystems.org/forums/...id=39231&stc=1
2,5 3 3 6 is memteststable, but not stable enough for prime or sp.
Using my ocz 4800 platinum kit (TCCD too, no version printed onto the sticker) with the same system 264Mhz 2,5 4 3 7 is the highest stable memoryclock.
Thx Geil.

---

set dynamic idle cycle unit DISABLED :)

Hi gigi, why? Throughput is better with dynamic counter = enabled.
Do you think I could reach 2,5 3 3 6 with dc = disabled? Well, I'll test later.

Here some tests of my Geil One S.

Testconfig. :
Fx-55 SD @ water
DFI-Lanparty nF4 Ultra-D (Bios 623-1)
OCZ Powerstream 600W

300Mhz @ 2,5/3/3/7 @ 2,8V

http://www.forumdeluxx.de/gallery/da...e_300x9_01.gif

305Mhz @ 2,5/3/3/7 @ 2,8V

http://www.forumdeluxx.de/gallery/da...e_305x9_01.gif

My 24/7 settings 295Mhz @ 2,5/3/3/7 @ 2,6V +0,3V

http://www.forumdeluxx.de/gallery/da..._295x10_01.gif


joe_cool ;)

joe
can this go higher?