Man! I managed to get 32M out of all three of you big fish there, playing with brand new Redline :)
Am I good or what? :lol: :ROTF:
Printable View
Man! I managed to get 32M out of all three of you big fish there, playing with brand new Redline :)
Am I good or what? :lol: :ROTF:
My sticks don't like much over 3.68V. I don't get much increase from 3.5 to 3.7.Quote:
Originally Posted by saaya
OPP
No AC for me. Room temp was at 27.4C, it's cooling off now though, 26.2:DQuote:
Originally Posted by charlie
Yea it was a warm one today, looks like the next few days will be getting even warmer.
OPP
To da OC guys :toast: :clap:
Also this discussion should remind us all that benching is NOT real life and that hardware reacts much differently for each. I have been a victim of the IT WORKS GREAT - GET IT hype. This thread as a whole helps put it all back in perpsective again.
So now who is going to put up the 290 mem FSB w/ an Hour of OCCT screenie please :fact:
(/me ducks new batch of tomatoes :D )
Any INTEL platform results ?? :confused:
could 250-260+ fsb (2-2-2-5) be possible ?? :stick:
INTEL???Quote:
Originally Posted by Supertim0r
Oh yeah, I'll have Dothan/CT-479 and P4C800 here next week... it'd be really nice if it went 270 on the Dothan!!!!!
C
I can't wait to see how the do.
I want some on my P5P800 (vdimm modded) :slobber:
I'll get a dothan + P4C800-E next week too ;)
Don't keep your fingers crossed, I tried other UTT on P5P800 and they were HORRIBLE!Quote:
Originally Posted by Supertim0r
C
Technically the XP3500 Redline will perform the same wont it? I am on a low budget so the 4000 is a bit high for me. Anyone get the XP3500?
Isn't the redline just like the other UTT ram? It just happens to be warranted for higher voltages and have a red heatspreader?
I don't know how they bin, but 3200 may not pass the same testing that the 4000 do... I wonder if the 3200 are FAILED 4000???Quote:
Originally Posted by uscfan
C
https://www.mushkin.com/doc/products...tail.asp?ID=15
I am assuming this can essentially do the same exact thing, it's just not speed binned?
Charlie !Quote:
Originally Posted by charlie
Give this Mushy a try on the P5P800 :p: maybe i'll replace my OCZ Rev2 :rolleyes:
Quote:
JNav89GT
man I gotta tell you guys something. This site was founded on respect and mutual admiration and there has in the PAST always been a "kind of reverence" for the hardcore overclockers and forefathers of our hobby. Lately, I have seen this degrade. Bacchus, I'm not talking to you! You pose some interesting questions in a mostly respectful way, but I see new people with 50-300 post counts coming on the forum and basically dis-respecting people who have 1000x the skill and knowledge that most others have. I find it unsettling to see these posts become degraded by people thread crapping on what someone reports. This thread, and the gentleman who had the Venice vs San Diego thread are prime examples of not showing proper respect. Just b/c you started overclocking a few months ago and consider yourself expert, doesn't qualify you as truely expert.
I'm not saying you have to take my word, charlie's, or Opp's word as gold for that matter, but show some proper respect or the knowledge you have come to take for-granted will slowly migrate away from this climate of hostility and suspicion.
Sorry dude, my intention wasn't to disrespect anyone, not in the slightest :). I apologize if it came across that way to you - no need to get your 'feathers ruffled' :D.Quote:
JNav89GT
I agree bennah, sorry for going OT, just got my feathers ruffled. Again, I'm not upset with Bacchus
What's that about my post count? Are you judging me by a number :)? I'm here to share information, and learn a bit of cool stuff from you guys if I can. I find your assumption that I'm ignorant a little insulting.
As I said, it is great to see peak bencheable results, and the outside potential of these sticks in the hands of the masters.
Even if this is XtremeSystems, many of us like me are too poor to have more than one machine, and for day-to-day use we use the same overclocked machine that we push to bench with. I need stability if I'm going to game on my benching rig :).
Anyhow, you don't have to agree with my question.
Guys, thanks for the 32M results, that's a more decent limit to judge the memory by, and still very promising for these sticks :). Charlie, are you going to give them some cold air and more voltage?
wasn't calling u ignorant, I'd be obtuse to believe that post count implies intelligence. However, my implication re: post count had more to do with time spent in this community and respect earned. I'm not trying to call any one person out on the carpet, I'd just like people to be a bit more respectful in their post. It's not just this thread either, it's many I see and view where people post before thinking and incite alot of negative feelings.
This is a community of overclockers, and yes budget plays a key role in many peoples decisions. I realize and respect that! I believe anyone here had the right to inquire and ask in proper ways for information. Let's just keep it above boards fellas and have a good time :)
Well said dude :).Quote:
I believe anyone here had the right to inquire and ask in proper ways for information. Let's just keep it above boards fellas and have a good time :)
How would Mushkins PC4000 UTT model differ in any way from OCZ's PC4000 UTT model? Same PCB, same ICs... perhaps one company uses a better binning standard ? :)
I thought they were different ICs? Redline is BH-UTT and VX is CH-UTT?Quote:
Originally Posted by felinusz
Are people telling me they want to know if they can run 270+ 2-5-2-2 24/7 on their benching or gaming rigs at +3.4v rock solid ?
There is no point running your rig at this sort of speed / timings 24/7 compared to something less tight and slightly less speed. Does Far Cry become jerky, is your browser slow to respond because you are running 2.5-3-3-7 instead ? That letter to your bank manager for more money having delay between characters ?
Can anyone in the world spot the difference in general use between 2-5-2-2 and 2.5-3-3-7 ?
If the argument is , well I have only one machine and sometimes want to bench it as well, then you do not need to bench rock solid 24/7 as you will not be using it that way, and therfore why ask ?
I think people are being picky. It's blindingly obvious that in this case Opp just means he is not at the very limit at that speed when he says "rock solid " He's talking about how close he is to the edge, not how long it can go without falling over.
Even if you have to run your machine 24/7 at this speeds asking Opp whether his does 24/7 at this speed has no bearing at all on whether you will be able to run it like that due to variability .. so why is it important that his does, what can you conclude ?
I'm not defending Opp here because he is a good overclocker, I more surprised that people are not showing a bit of common sense and thought, rather than wanting to be spoon fed some minutae if info that is not relevant and will never have to be used by the requestors.
It's not often I write a post like this, I hope my mother does not read it and ground me for a week for being rude :shock2:
Regards
Andy
LOLQuote:
Originally Posted by OPPAINTER
I beleive that an O/C shoud be stable. But it depends on what you use the sytem for. I have a CAA2C and old BH-5 but I dont run it at 270x10 (mostly because the CPU is a peice of crap) because its faster.
I can run all my games at 240x10 with really thight timings on the ram and the cpu is at 43C (full load SnM) on air in a 28C room. And its ROCK stable, a full day of dual prime smallfft's and 9 hours of test5. Stable. This is my 24/7 clock and took me a week to get stable with dacent speed. I have a few other combination off settings I'm working on for benchng but stressCPU craps out after ~20mins, but I can BENCH all day long. So it all depends on what you want it for. :cool:
BTW this redline looks nice. Pity I can get it down under. :(
Quote:
Originally Posted by zakelwe
I think you belong HERE!
just ordered myself a pair as well, hope to have more luck with these then with my old crappy ocz vx
Interesting. I must be one of few rare members who only goes for 100% stability in overclocking be it prommy cooled, water cooled or what not.
As the argument about timing in real life... it matters when I play CS:S @ 1600x1200. It will matter in whatever upcoming game. Not everyone goes after bench only to be honest. 3dmark to me is more of stability test tool and gathering some idea on how well my game will play.
As for you belong wherever message above, step in the wrong direction is all I can say.
People have different opinions and goals... If you can't respect it, I see no reason why you would feel you belong here.
Too bad memory is kind of out of budget to find 4 sweet sticks for 2gb for me for time being :P
Same here but isntead OCZ VX i am with OCZ 3200Plat.rev.2Quote:
Originally Posted by Funny_S
It is the people who want benching 24/7 stable are the people who should be there because they are not near the extreme limit when benching. As I tried to explain in my post.Quote:
Originally Posted by WeStSiDePLaYa
I think you need to read it again.
Regards
Andy
3200gold is BH UTT, VX is CH UTT.
Redline i believe is CH UTT with the 815pcb, we use the 808 at the mo.
Im not going to get to involved with this but i would love to see some 6 hr prime sessions at these fsb's, i too can post and run benches here at 275 with VX and 285+ with EB but thats just BSing customers into thinking its stable.Seti will run with scrolling errors in memtest as will 3d apps, bench stable is not 100%, just so we all know.