Good job, misteroadster :thumbsup:
Thanks for Prime95 screenie ;)
Do you think you could take down your 23:57 in SuperPi 32M with that 3700+ San Diego?
Printable View
Good job, misteroadster :thumbsup:
Thanks for Prime95 screenie ;)
Do you think you could take down your 23:57 in SuperPi 32M with that 3700+ San Diego?
of course, without problem :).
I've done 24Mn02 without optimisation.
BTW: your 24Mn01@3Ghz w/winnie is impressive :toast:
looks really good. Can't wait for the summer to come around, big projects ahread! :D
Max 3D2001 stable Added (my old FX55 3205mhz) , max OCCT stable too.
Aircooling tests tomorrow. :)
Very nice work :toast: It's much appreciate :up: Looking forward to the air tests... and maybe some 4 dimms test ;)
Some 4 dimms tests would be great idea...
Just want to confirm because this seams too unreal.....Quote:
Originally Posted by misteroadster
if you were to hook up a chilly1 modded prommie like mine (the works, regass, chilly1 block, suction line, etc) to that chip, do you believe it would hit the same speeds or possibly higher? :slobber: :slobber: :slobber:
If so I'm ALL over this chip the instant it comes out
Of course with a Prommy the results should be slightly better ;)
Aircooled results updated :)
http://www.overclocking-masters.com/...pic.php?id=297
Quote:
Originally Posted by misteroadster
I cant read that language but from the screenshots I can infer that the 2.8GHz at 1.4v is with prometeia and the 2.7GHz is air cooled. Increasing the volts to 1.6 only gained 50MHz. If I misunderstood, let me know :confused:
no, 2.8Ghz at 1.4v is aircooled.
Stock vcore 2755, maxed at 1.5v 2830Mhz prime stable
Really impresing results :banana:
It seems that the temp really went up with higher vcore when using aircooling.
What the max super pi/3dmark01 you can do with aircooling?
What can we expect with WC but not chilled ???
+20-40MHzQuote:
Originally Posted by PicaXuu
Cpull, i think a lot more, this chips like cold, not as a winnie, probably because larger L2 cache.
I think +50/70 Mhz personnally.
I've not tested max superpi and max 2001, because lack of time :mad:
Probably 2950-2980Mhz.
I wish I could have one.
Thanks
Man if those 3700+ can really 3dmark at over 2.9GHz I might just have to get that instead of a 3000+ Venice unless 3000+ clock high but im not holding my breath. 2.83 stable is a very nice clock and does not speak of yield issues at all unlike what some fear.....
Very impressive...must get one to replace my winnie maxing out at 2.75...any vcore higher will rcv sky rocket temp way pass 60°c on water !
Aircooled 2001 run, 21°C ambiant X850XT@PE Stock, no tweak XP SP2.
http://service.futuremark.com/compare?2k1=8548965
wow 3dmarkable at 2.93 you really got a good one! wish I could afford one, guess I gotta wait till fx57 comes out and 3700+ prices drop
So is it safe to say that 260x11=2.86Ghz @ 1.55v with high end air is prime stable?
Damn! That chip runs super-hot!!! Up to 76C on BOXed cooler? Man, that is extremely hot chip!
Didn't Winnies have max temperature of 70 C? So San Diego's have a higher one?
question now is has the san diego mem controller improved on any of your max memory oc's over the clawhammer, winchester or newcastle cpus ?Quote:
Originally Posted by misteroadster
HKPOLICE->no, the max prime stable i could have was 2830Mhz with M/B out of the case and G-power HSF, it's an high end HSF; but i hope this chips is not a gem , it's an early sample, so 2860 or more will be possible soon.
BACHUS ANONYM->Yes this chip runs hot with 1.55Vcore, but strange thing, the HSF is not so hot at this moment, less than an FX 55 at same vcore.
Mrlobber-> When this chip is at 70°, there is too much Vcore, oc is falling down.
Eva-> i used BH5, it's maxxed at 275-280 so i can't verify that, but oc is the same than with my winnies, and a little les than my old Claw.
Did anybody else notice the date on that 3700+? 0432?