that nail polish ain't too pretty, have you tried clear nail varnish or laquer, also, when i used tec's i used to use vaseline, which seemed to work, but it can get messy.
Printable View
that nail polish ain't too pretty, have you tried clear nail varnish or laquer, also, when i used tec's i used to use vaseline, which seemed to work, but it can get messy.
Just going over the thread :DQuote:
Originally Posted by FUGGER
what metal backplate are you reffering to?
The metal backplate that come with a64 motherboards,behind the socket
I assume it’s essentially the same for a P4 system?
Basically yes,the important is have an air-tight mounting,i think it can be done easily if you put a layer of sheet neoprene in the front of the mobo to catch the foam donut
what about the cpu pins how can you prevent condensation on them can you use this dielectric grese ? http://www.frozencpu.com/ex-swi-11.html i always experience ice aroudn the head and when i turn off my pc for a hour or so all the ice melts and i have to waight like 3 hours fo it to dry. any way around this
Hey guys, would it be a wise idee to use Plastik 70 to prevent against condensation?
Only the Plastik 70, no neophrene or stuff like that. It's only for some quick benches with waterchiller. Or to dangerous?
Plastic 70 is very good stuff, i use it on every mobo for benching!
I work for CRC Belgium. I get that stuff for free, that's why I asked :p
Can you use the type of insulation following chilly1 evaporator 24/7? Or do you need more? :rolleyes:
Got some other stuff today: Flex Seal
I think it's for sealing up heat places in/near car motors. But since the explanations on it are in all sorts of Scandinavian languages I can't really tell what this product can do or wat it can't do. Didn't found any English info.
What I can share you is a little test I did:
I mounted the little pistol on the head, pressed it, on so came a black sausage out of it. First when it came out it feld a bit like grease, but with less viscosity. But if u wait some hours it transforms to some kind of rubber/silicone.
Anyone used this before? Must be handy to seal up self made waterblocks, or maybe to use around socket area for airtight seal'n.
So if I plan on using this in a case, I should use the backplate of the A64? I ddn't have a 939 board yet, but I'm planning to upgrade. I might be getting a Vapo XE that's be modified with the chilly 1 unit, do I need to bother with the foam on the backplate or can I just use nail polish or the back of the board?
Anyone got a chilly1 unit guide for vga mounting? :)
Here's a link where runmc is mounting the chilly1 evap to the GPU.
Chilly1 Evap mounted on GPU :slobber:
Thanks Fugger , lots of stuff here ;)
If the grease can be avoided it is a wonderful thing. Not to fun cleaning that crap out of a socket. While it protects the pins and socket nicely it is easily contaminated.
The closed cell foam approach is the only way to fly and airtight means no grease which can keep our environment cleaner!
Nice One FUGGER, Nice guide there..
Isn't anybody experiencing problems with the O-ring shoving off the head???
Hi I am about to purchase a XS chilly off someone in the UK which says that he knows chilly personally, I asked him what would happen if the unit went wrong and it had to be repaired which he wrote back and said : "If their is a problem with the item I will repair it.I assemble the kits here in the UK and test them for specification I have several years experience of doing Phase Change mods and Chilly1 himself knows the standard I work to."
his email is austin and xtremesystems316 on ebay can chilly himself confirm he knows this guy or any of you say the price is a bit much, to find his vapo type phase change or his username sorry to bother you guys I just want to find some info before buying.
I solved the "ringie" problem:
:banana:
And my friend Jort has done a great job:
controller with LCD built in :
2 more pics:
Its working pritty good it seems:D
have fun :)
one Q,
how to remove/clean the dielectric grease????
Very nice walkthrough!!