Slot 2 or 4.Quote:
Originally Posted by Malachia
Slot 2 or 4.Quote:
Originally Posted by Malachia
Quote:
Originally Posted by bwan
thx
Some U P D A T E S in case that someone want to achieve more O/Cability............... ;)
You HAVE to REPLACE the Northbridge heatsink in case you feed your mobo with more VAGP and Vchip...........You can leave it as is BUT you'll gain MUCH more if you replace it............ ;)
I've replased it a few days ago and I 've pulled out 278MHz at 1:1 CPU:Ram with the BH-6 chips..........With the default heatsink I could pull out up to 271MHz CPU:Ram with my BH-6s............ ;)
I replaced it with a Swiftech heatsink and a DELTA 4 x 4cm fan 10000 rpms........ :D
The Swifty HAD to be changed a bit though so as to fit onto this mobo..........and here's how...........
http://www.thelab.gr/images/Hipro5/A...ifty_1_jpg.jpg
http://www.thelab.gr/images/Hipro5/A...ifty_2_jpg.jpg
http://www.thelab.gr/images/Hipro5/A...ifty_3_jpg.jpg
http://www.thelab.gr/images/Hipro5/A...ifty_4_jpg.jpg
http://www.thelab.gr/images/Hipro5/A...ifty_5_jpg.jpg
http://www.thelab.gr/images/Hipro5/A...ifty_6_jpg.jpg
After that I managed to bench 3D from 263MHz at 1:1 that I was before TO 268MHz 1:1 with the BH-6 now........... ;)
i use northpole, it rocks!!!!!
hipro do you think i can gain a little bit using xtreme cooling on chipset?
Only a little bit......With the IC7 I gained about 2 - 3 MHz more at 1:1 and same at 3:2 cooling the 875 chip with a Vapo-chill........ ;)Quote:
Originally Posted by Malachia
ok...i'm going to mod mine today or tomorrow...
have you read about 6xx series don't work on as8??? :(
ah, my card blocks at 290 without mods(5:4), with agp 66/33, putting agp at 76/38 i can go a little bit highter???
I haven't tested a 6xx series yet .........Quote:
Originally Posted by Malachia
Try to put into bios at 5:4 the N/B Strap CPU as : PS800 and the CPC = Disable to see how it does...... ;)
Quote:
Originally Posted by hipro5
already done this, i have modded mine yesterday evening :toast:
now, to reach hight fsb frequencies what are best settings??? my 3.0 reach 290*15@ 1,5v under my mach gt 404/410, but above this it doesn't bench even with 1,7 :(
You know, I really wish I had a clue how to mod. Nonetheless, that looks amazing.
Over 350fsb off a 865 chipset, wow. Puts most 925's to shame. What I don't understand is why mobo manufacturers don't just make the boards this way, instead of us having to mod them ;)
So what was this mobo's maximum fsb unmodded?
Nice work HIPRO... :toast:
Hipro...
Capacitors are few and far between here in alaska...
what I have here are 6 Rubycon 2200 uf 6.3v T0332 capacitors here.
will these work for the back capacitor mod?
also, what does the Vfsb mod do??
lastly...
will the back capacitor mod work, without the 100nF to 1uF NO POLAR SMD caps ??cause theres no chance on earth of getting those in alaska.
Guys i have a strange problem.
With 540 on my as8 i had max screenshot 345fsb.
with 640 i can run at 299fsb 1mb super pi(27sec) but at 300fsb it freezes the whole setup when i am switching the fsb from guru. I tried this too --> http://www.cpuid.org/download/eist.zip with 14,15 multi and it did the same thing. I put 3:2 my memory too but nothing. I have done vdroop + vagp but i didn't gain anything except the stable vcore. Today i will do vchip and vfsb. any ideas for my problem? I dont think that my cpu has a limit at 300 fsb.
Thanks unseen.
you get 345 without v-chip???
yes it was without vchip. Under my cascade of course.
Here it is an old pic [img] http://www.thelab.gr/attachment.php?s=&postid=175182 [/img]
Now i did the the vchip (it is little diffiult) and i trimm it to 1,8v , and i flashed with new bios but i again i hit a wall with my 640. At 299 i can run superpi 1mb at 300 it freezes....
Any ideas...
i think is a problem of compatibility with 6xx...try the old bios???
btw, the new bios is the 1.6???
Guys Im having a serious issue on my AS8 with a 640. This :banana::banana::banana::banana: cant be normal :stick:
Stock bandwith:
http://img.photobucket.com/albums/v1...p4bandwith.jpg
258 2.5-3-3 bandwith:
http://img.photobucket.com/albums/v1...bandiwthp4.jpg
Just as a heads up:
Game accelerator on *any* setting other than Auto hangs at POST
Anything higher than Enhanced on the Refresh Cycle time hangs at post
Everything is bascially on auto with the BIOS (RAM) settings
Anyone have any bright ideas before I scream at Abit on the phone today? <demanding they update their gdamn BIOS> :upset:
i do at 200 2-2-2-5 around 4614/4625...
Uhhh yea... sooooo anyone have a clue wtf is going on? Anyone? :stick:Quote:
Originally Posted by Malachia
what bios are u using???
Newest available from Abit. version 16Quote:
Originally Posted by Malachia
same like me.... i donno...i can use all settings with no problems...
Just got done talking to the guys on DFI street. Its most definatly a BIOS issue. Newest one fixes this very problem :upset: God damnit Abit make me my :banana::banana::banana::banana:ing BIOS!Quote:
Originally Posted by Malachia
Sentential
Two things you could try.
1. Under advanced chipset settings use: Auto-Auto-Auto-Disabled-Disabled
and then use N/B Strap 667 instead of 800. See if it posts and try to run Sandra again. This is the hidden way of enabling PAT on IS7 at least. Be advised: previous versions of CPUz recognised the mem dividers incorrectly.
2. On my IC7, Auto is very close to max performance, but not on the IS7 (which has the same chipset as AS8). Here you have a link to some previous testing done by me, with settings you can try:
http://www.ocforums.com/showpost.php...8&postcount=34
There's a lot of more memory related things in that thread regarding PAT if you're interested.
Also, search for as8 by hipro and you'll find thread where he has written what kind of settings he's used to reach insane FSB speeds on the AS8.
Thankyou so much. Ill try that now
Btw THIS:
http://img.photobucket.com/albums/v1...l/IMG_1899.jpg
...isnt normal :stick: