Suprised you don't have one OPP, after what you did with the S754 Lanparty.
Printable View
Suprised you don't have one OPP, after what you did with the S754 Lanparty.
OPP I haven't tested the booster, bios does 4V with the jumpers over to the 5V line setting or you just tweak up the 3.3V line (which i prefere)
Regards OPP not having one he will have next week I hear ;)
TCCD revisited.
Thought I would go back and revise settings. Now the cpu does 2.6GHZ tops so im limited to 300+ x8 or 270+ X9 so i had to compromise here.
3200Plat rev2 at 2.5-4-3-8 310fsbX8 1T (sandra reads wrong)
I still personnally think VX is better with 2-2-2 or EB 3-2-2 but i know many like the TCCD stuff.
Here we go.
http://www.xtremesystems.org/forums/...id=22758&stc=1
http://www.xtremesystems.org/forums/...id=22761&stc=1
http://www.xtremesystems.org/forums/...id=22759&stc=1
http://www.xtremesystems.org/forums/...id=22760&stc=1
Im kinda struggling with Hynix based dimms which is weird as i have a pair here that do 300+ on an Epox 939 so it looks like the board is tuned to specific brands of memory IC and Hynix isn't one of them. I will be firing off an email to see if anything can be done for those looking to use dimms they have from older Intel rigs.
Tony do you know if an XP-120 heatsink will fit fine on this board and will you be testing the booster on this? I ask because I am afraid of running my psu out of spec 24/7. I'f I am going to tweak the 3.3v line of my psu it will be for everyday use. Is there a risk of ruining the psu or anything for that matter running the 3.3v line to say 3.6-3.7 all day everyday? That is way out of spec. I am not too sure what exactly runs of the 3.3v line but a day day would come if things starting permanantly shutting down. The booster might be a nice alternative if it works. Hope to hear something back. Thanks.
Yes I'm very bummed :( No Love:DQuote:
Originally Posted by abstrakt
Apparently they have one for me right now, it was suppose to be sent out on Thursday but no go. I guess it needed hardware changes and they weren't done untill Late Friday. I guess I get a beatup Beta board next week:D
In the meantime I think I will take down #1 spot in 3d2001 with MSI NEO4:D
I got my new FX55 chip last week but the NEO4 only gives me 1.7V max v-core so the chip maxxes out at 3420MHz or so. I'm hopeing DFI will take this chip into the 3600MHz clouds:D
BigToe
Test that booster:D
It's OCZs job to be the ginne pig:D
OPP
So, according to what I have seen here, the DFI likes OCZ EB memory a lot more than my P.O.S. MSI K8N Neo2.
Is this true from what you have seen, Tony?
Thanks
Now thats what we want to hear OPP, some 3D 01 action with the new hardware :DQuote:
Originally Posted by OPPAINTER
Good luck with the DFI and your new FX55 ;)
Yea if this MSI X800XT card can Overclock, 3D01 is mine, even at the low speed of 264x13. My new FX chip loves W2k unlike my last FX chip.Quote:
Originally Posted by Bennah
I'll modify my XT card and throw it on the Cascade today and see what I can do. At least MSI still loves me:D
OPP
It might be more work for DFI, but they could release different bios versions for specific ram ? that way everyone is happy hehQuote:
Originally Posted by bigtoe
what happen to the old FX-55 ? :DQuote:
Originally Posted by OPPAINTER
I have no Idea, it was just sitting around for a month doing nothing, I went to throw in a rig and it was dead.Quote:
Originally Posted by eva2000
OPP
Quote:
Originally Posted by OPPAINTER
Ummm, should we assume that you did not entertain Vivian properly in Vegas and this is pay back time? lol....(still waiting to hear about that ''ummm...meeting''!)
I never made it to meet with Vivian in Vegas:D I was tied up elsewhere when I was supose to go meet her.Quote:
Originally Posted by Blindbat
So I have still yet to meet her:D
OPP
So what your saying is that even when I get more voltage for this chip it won't clock much more?Quote:
Originally Posted by choseone214
We'll just have to see:D I hope that is not the case.
OPP
that explains your late delivery of your board! ;)Quote:
Originally Posted by OPPAINTER
question for bigtoe :
wht voltage did you use for your micron memory modules . I have crucial ballistix and they have micron chips as well but which can do tighter timings . I just want a fair idea as to wht voltage to give em when I overclock them . :)
thanx
We got us a 0441 EPMWQuote:
Originally Posted by choseone214
OPP
Hello!Quote:
Originally Posted by OPPAINTER
are you going too take 01 with x800xt or an x850?
I think that i must get the new cascade upp and running soon so that i can give you some competition :)
But Good Luck in the hunt OPP !!
LMFAO exactly my chip that walled ta 3426mhz :( OCrookies also around this mark on his baker -100c cascade, and Ojdr2001 also same 0441epmw chip at 3380-3420mhz "r404 with freezing temps on the condensor"Quote:
We got us a 0441 EPMW
So I hope we see something over 3450mhz to break this cycle with this chip stepping. :)
I see some thread hijacking here...;)...LOL
Sorry for the off topic :(Quote:
Originally Posted by bigtoe
I found the same when beching my Epox 9NDA3+ for some reason the DFI is giving lower benches. i hit 4k unbuffered sandra on the Epox and came nowhere near on the DFI....email time I think.Quote:
Originally Posted by Mrki
here is my Epox unbuffered with the 3500EB, now this is at 290fsb but 10fsb more on the DFI will not give me the 4K the epox is giving.
http://www.xtremesystems.org/forums/...chmentid=20734
DFI is always faster... have you check every setting in bios... maybe you forgot to enable certain features :(Quote:
Originally Posted by bigtoe
DFI is NOT always faster....they like any manufacturer are always tweaking to find speed. Don't worry I will just fire off an email and they will look into it.;)Quote:
Originally Posted by tictac