Then just flash back...
And what exactly do you seek?
Printable View
Then just flash back...
And what exactly do you seek?
Of cource a modded bios for my Gainward 6600GT PCI-EX with 1.4v and can run SLI mode :p:Quote:
Originally Posted by Mavke
Does it run now SLI? With the Original BIOS?
Do you think altering bioses will change the pci-e frequency tolerance of the video card?
I have a gigabyte 6600GT PCI-E and the official release F2 bios allows much higher pci-e frequency than F1 bios, but still not enough.
Anyone have any ideas? Do you think the BFG bios will work with my card?
Yes , the original that i attached can run SLI modeQuote:
Originally Posted by Mavke
heres the bios for the Asus EN 6600GT > Asus EN6600GT
another to add to your collection :) . if you could mod it to 1.4 volts that would be cool too. not planning on doing it until i get a better cooler, but i would like to have it for the future. has anyone noticed better overclocking with the extra voltage? did the temps increase much?
Thanks Veedo! Great stuff.
Well NiBiTor is not yet fully supporting the 6600/6600GT series but in the upcoming new version it will be. ;)
You did great job man :toast: I love that NibiTor toolQuote:
Originally Posted by Mavke
can you voltagemod my Club3D 6600 GT PCIe via bios ? i would like to know what is standard voltage. thanks ! i'll post bios later.
Well if I get the BIOS then we can check...
:) ok, here ya go, if possible could you tweak different files ? one with 1.4v (if that is not standard) and 1.5v and 1.6v (also if possible) thanks in advance ! :toast:
played around with the card. standard gpu/mem = 500/500 (1000 DDR)
max mem was 1250 DDR / gpu 510. think gpu core is 1.3v
Bios for a leadtek 6600GT AGP? more voltage? :stick:
Thx guys!
bump, anyone having luck with these new bios's?
I apologize if this has been covered but whats safe volts on stock cooling?
I'll add a little to the endless requests :P
Inno3d 6600GT 1.6ns more voltage...on core if you can do mem as well...all the better...Don't know what the default voltage is unfortunately (one day i will get a multimeter Do i need to post the bios already on card? I can post it easily cause i got it on floppy,
Well that is not possible the memory voltage is not controlled within the BIOS really and the GPU voltage table is coming from NVIDIA and you can't modify it. But if you can provide your BIOS we can take a look... So please provide your BIOS... Is it a PCIe?
tis AGP:) here it is anyway...
inno3dbios
thanks so much
Is there actually any more to this bios modding than using Nibitor program? cause i had a look at my bios through the program and it seemed already set on 1.4 volts (so i assume it was stock) but it doesn't go anyhigher...even with extended voltages...does this mean mine can't be changed? :(
nibitor doesnt let me change the core voltage for 3d and throttling, and it shows the core speed in idle for my card as 65000mhz 0_o :stick: :lol:
can somebody help me?
im looking for a 6600gt leadtek extreme 128mb file that has vgpu set to 1.4v or higher if possible, thx :)
Can you get us your BIOS? Then we can see if we can fix this issue...
i wouldn't mind trying any old bios with 1.5 volts :/
Here is your bios saayaQuote:
Originally Posted by saaya
thx a lot man :toast:
lets see what this does :D
i will try it tomorrow and report back :)
what do i do if the card freaks out or doesnt even boot?
i have a pci videocard, but is there a guide with all the commands i have to type in case i get a bad flash or anything i can print out? thx :)
oh, this is the wrong bios! im on the leadtek 6600gt extreme
heres the bios for my card: