New OCZ PC-4200 Platinum @ 550CL 2 , 600 and 630

Quote:

---

Originally Posted by Zeus

Wow, this TCCD is really making some money!

We take a truckload of TCCD chips, test them and if we find them to be average we put them on the Platinum rev2 3200EL.

If they are pretty good we'll put them onto the pc3700.

If they like high voltage we put them on these new wonder sticks!

I'm starting to get why my rev2 isn't doing DDR600..... :(

---

I hope that is not the case. Because I am going to purchase some Platinum rev2 3200EL next week. I just am hoping for the new die revision. Isn't it possible that 3200 gets some great TCCD as well? I am more interested in DDR 500 at 2-2-2-5 then just DDR 600.

If you want DDR500 at 2-2-2-5, you should get BH5.

Zeus ,

Any parts that people would not be satisfied with go into a much cheaper product than the rev 2 , just a FYI . Thats why OCZ has such a great reputation for releasing good products and backing them up with our outsatnding warranty service , I am sure many people can attest to that.


If we wanted to we could ship a a TCCD product with no hand testing ( automated testing only) and have the same 2-2-2 speeds everyone else does , while cutting our costs
That would certainly be a more profitable scenario for OCZ . The cost of labor in California is pretty high.


We would not lower the quality of any product , but I am sure many people appreciate the fact that we offer the ability to be able to buy the best of the best product.

So please dont go around trying to make OCZ sound like the bad guy for offering a service to people.

I just have to say... OCZ is the best company for overclocking equipment, period. You guys should make CPUs. :D

We only wish we were big enough to make CPUs that is a multi-billion dollar proposition

Quote:

---

Originally Posted by ryanpgroovy

Zeus ,

Any parts that people would not be satisfied with go into a much cheaper product than the rev 2 , just a FYI . Thats why OCZ has such a great reputation for releasing good products and backing them up with our outsatnding warranty service , I am sure many people can attest to that.


If we wanted to we could ship a a TCCD product with no hand testing ( automated testing only) and have the same 2-2-2 speeds everyone else does , while cutting our costs
That would certainly be a more profitable scenario for OCZ . The cost of labor in California is pretty high.


We would not lower the quality of any product , but I am sure many people appreciate the fact that we offer the ability to be able to buy the best of the best product.

So please dont go around trying to make OCZ sound like the bad guy for offering a service to people.

---

setup an OCZ Australian office/factory/ram testing for cheaper labour and better distro timeliness in the Asian/Oceanic region hehe :D

Quote:

---

Originally Posted by eva2000

setup an OCZ Australian office/factory/ram testing for cheaper labour and better distro timeliness in the Asian/Oceanic region hehe :D

---

I second that...and I'll be your beta tester :cool:

What is the SKU or part number of these?

Where will they be available first? In California, or other places simultaneously?

Ryan I commend you and OCZ for all your help and support :toast: . Living in Arizona I understand the whole labor thing, because in AZ wages are sh*t compared to california. It's hard nowadays to find a company that cares more about the product and enduser then the bottem line! In the computer world I much rather give my hard earned money to OCZ then anybody else, and thats my bottem line!!!

Quote:

---

Originally Posted by ryanpgroovy

Zeus ,

Any parts that people would not be satisfied with go into a much cheaper product than the rev 2 , just a FYI . Thats why OCZ has such a great reputation for releasing good products and backing them up with our outsatnding warranty service , I am sure many people can attest to that.


If we wanted to we could ship a a TCCD product with no hand testing ( automated testing only) and have the same 2-2-2 speeds everyone else does , while cutting our costs
That would certainly be a more profitable scenario for OCZ . The cost of labor in California is pretty high.


We would not lower the quality of any product , but I am sure many people appreciate the fact that we offer the ability to be able to buy the best of the best product.

So please dont go around trying to make OCZ sound like the bad guy for offering a service to people.

---

Sorry for coming on strong onto OCZ last night.
I was tired, a little drunk and jealous at guys who did DDR 600 with this RAM.
I guess buying PC3200 RAM is not the best way to get PC4800 speeds. ;)

Does OCZ make cheap TCCD Ram also?
Never knew that.

I'm still puzzled why i can't run this mem at DRAM Drive Strength level 1 or 2.
Gonna get me a new CPU and if i still cannot get DDR600 stable, this OCZ ram will be on sale.

Again apologies to everyone who felt offended by my post yesterday.

I know this is off topic but damn zeus EVERYTIME I read your posts I can't stop staring at that picture of brittany spears :slobber: Where did you get it?
Sorry for posting off topic.

haha lol :D

Quote:

---

Originally Posted by duane26

I know this is off topic but damn zeus EVERYTIME I read your posts I can't stop staring at that picture of brittany spears :slobber: Where did you get it?
Sorry for posting off topic.

---

LOL! :D

some nice pics

enjoy ;)

Thanks zeus, the black and white one is still my favorite, its hypnotizing!

hmmm

http://www.ocztechnology.com/aboutocz/press/2004/115

is this the same RAM? because it says CAS 2.5

Yes its rated 2.5-3-3 @ 533
We try to rate conservatively


remeber we have been posting these benches with the voltage at 3.1 ect , and average folks dont really push the ram very hard

Quote:

---

Originally Posted by ryanpgroovy

Yes its rated 2.5-3-3 @ 533
We try to rate conservatively


remeber we have been posting these benches with the voltage at 3.1 ect , and average folks dont really push the ram very hard

---

Ahahah... I doubt average folks would buy this kind of memory :P

^even some unaverage folks cant get their voltage up to 3.1v

I wish I could get 2.8, Yeah don't laugh to hard, LMFAO!. I'm to scare to run DDR booster in my mobo.

Where is Zues. Im getting tired of scrolling up the page so far to see britany!

Great work ocz, nice to see a busniess putting in some hard work to give us some damm fast ram which just wasnt available mid this year. Alot of people will be able to build some very fast systems early next year and I hope you will be able to surprise us with some faster ram befor then :P

Hopefully your top of the line mem wont go too far over $700 aud by then.

Quote:

---

Originally Posted by Schaef

Great work ocz, nice to see a busniess putting in some hard work to give us some damm fast ram which just wasnt available mid this year. Alot of people will be able to build some very fast systems early next year and I hope you will be able to surprise us with some faster ram befor then :P

Hopefully your top of the line mem wont go too far over $700 aud by then.

---

Ditto. If you honestly think about it hit and miss factor minimized, even with premium attached in end comes out cheaper than cycling through components. Don't CPU's speed rating based on this anyway? :)

looking forward to getting these new monstrous OCers!!!!!!!!!! what is the exact model? is the exact model the title of this thread?

Quote:

---

Originally Posted by OCZEric

650 2.5-4-4-10 2T Single channel in the same DFI 250 motherboard.

---

running 2T is crap, you can see the bandwidth.

What is the max OC with 2 dimms.?