DEFINETLY Have a Problem with my ASUS Temperature Readout!
I Only WISH it was that Low!:eek:
http://hallowen.freehosting.net/hq19ul.jpg
Printable View
DEFINETLY Have a Problem with my ASUS Temperature Readout!
I Only WISH it was that Low!:eek:
http://hallowen.freehosting.net/hq19ul.jpg
Initial Static Charge of R1150 was 150psi, Needs More, Going to Increase it to 200psi tommorow after temps return to Ambient.;)
Also need to Swap out Fortron 530 PSU with my PCP&C Turbo Cool 475 for Better 3.3/5/12 Volt Lines, Which SHOULD Allow More of an OC.:D
truely amazing work
Quote:
Going to Increase it to 200psi tommorow after temps return to Ambient.
AAAHHH The Idea he spoke of :)
You probably need to set it at 6 to 10 psi sooner after start up get it running at load then as load increases increase pressure.. It also maybe a little out of adjustment on the first stage what are your interstage temps?Quote:
Originally posted by hallowen
Chilly1
Low Side at 16psi / High Side at 235psi
Still adjusting, but seems to hold around -84/-85C:)
Temps are @-36/-38C (varying), although the Colder the Second stage gets, so does the First(-39 to -40C).
Was Thinking of going to R507 on First Stage for a Little Improvement.;)
Superheat on First stage is @14F
Subcooling is @6F
Condenser Temp Diff is @4-5F
R507 would help a little. What is the superheat at the exit of the evaporator on the first stage? Subcooling at the exit of the First stage condenser? Let's tune the first stage for -45 to -50C, What is the COP of the charge in the TXV? What is the suctionline temperature of the second stage 3 inches away from the compressor? Do you have an oil cooler? What is the discharge temperature of that? What is the temperature of the liquid line at the inlet to the pev?
Nice work, very clean build.
Give that prescott more volts and you can probably catch me on 5.2Ghz screen shot.
I also have a 4.9Ghz pi @ 29 seconds
FUGGER,
How Much Vcore Do You Run With Yours?
I Just Got finished with 3.3/5/12 Volt Line Mods on My Fortron 530.
I have Adjusted them to 3.8/6/12.8 to Start with, they were only 3.2/5.45/11.7 before. That should help me get CLOSER to your 5.2 Screenie! :D
OK, I'll Pump up the Volume(Volts) Tommorow and See What'll Happen!:p:
oooh good luck hallowen
Ladies and Gentlemen:
It is with GREAT SORROW:( :( :( :( , That I Must Tell You While I was Trying To Catch Up To FUGGER's 5.2Gig Screen Shot by Upping the Vcore to 1.7 Volts, My 3.2E ES Has FAILED! :shrug:
And Yes, I have tried it in another MoBo with the Same Results!:mad:
I was in the Proccess of going Past 5.3Gigs, When My System Just Shut Down and Would NOT Re-Start!
Such is The Life Of an OverClocker....................................... ......
If it was Easy, There would Be No Challenge, So Now I Move on by Substituting my ES for my 3.0C SL6WK and Trying again!
I WILL NOT QUIT because of This Setback!:wave:
I'LL BE BACK!............................................. .................................................. .....................
http://hallowen.freehosting.net/arnold.jpg
:( Was condensation a possibility or did the volts kill it?
S.P.D.S.(Sudden Prescott Death Syndrome)!
I Found NO Evidence of Condensation when I Disassembled the Evap and MoBo.:(
That sucks:(
ouch...better luck next time
I'M BACK!.............................
And I Ain't Too D** Happy!:(
About 650 MHz LESS With My 3.0C, But That's the Way The Cookie Crumbles(So to Speak).
Movin' on to the Third Stage for the Cascade.................:)
http://hallowen.freehosting.net/3.jpg
ALLLLLLLLLLRIGHTY THEN!
I have Remedied the Deplorable Situation I was in by Getting the H*** away from INTEL, and Purchasing My NEW System!
:banana:An AMD FX-53(939) and a ASUS A8V Deluxe MoBo! :banana:
I'M BACK WITH A VENGEANCE!:rocker:
:-D ya man let's see some real action now!
I like your attitude :D :banana:Quote:
Originally posted by hallowen
ALLLLLLLLLLRIGHTY THEN!
I have Remedied the Deplorable Situation I was in by Getting the H*** away from INTEL, and Purchasing My NEW System!
:banana:An AMD FX-53(939) and a ASUS A8V Deluxe MoBo! :banana:
I'M BACK WITH A VENGEANCE!:rocker:
This is gonna be huge. Good luck mate!
3 stage cascade and the new AMD FX-53(939) and a ASUS A8V Deluxe MoBo! would give some really really nice oc scores maybe even close to the top GL
I'm Makin' Myself Drool :slobber: Thinkin' About It!:hehe:
hey bro,
When do ya get the goods?? That will be sweet!!
Dang, I think Texas is the last place on the planet to get cards. I can't even find an x800pro.:(
I guess I'm gonna have to get this new 9800xt out of the box so I'll at least have something to bench with.;)
runmc,
I Bought the MoBo/CPU at Monarch Computer Systems(Was the Only Place that Had Both!)
Yeah Man, After Layin' out the Green for My AMD Setup, My 9800XT Will Have To Do, But It'll be Close Enough to an X800Pro. :D
Can't Wait to see Your "Twin Double Pumpers" in Action!:cool: