interesting to see how this week will clock. keep us updated, mine is 1 week newer than you, and different batch.Quote:
Originally posted by OPPAINTER
AXMH2400FQQFC T818776K30193
IQZFA 0347XPMW
OPP
Printable View
interesting to see how this week will clock. keep us updated, mine is 1 week newer than you, and different batch.Quote:
Originally posted by OPPAINTER
AXMH2400FQQFC T818776K30193
IQZFA 0347XPMW
OPP
The lucky bastard has a XPMW cpu... man. A XPMW Mobile barton, that should do 2.9Ghz on water.... with a bit of luck ;) You can imagine what it whould do on a triple cascade!Quote:
Originally posted by Stang_Man
interesting to see how this week will clock. keep us updated, mine is 1 week newer than you, and different batch.
he was talking of a kt600 board, not the a7n8x.Quote:
Originally posted by r3b0rN
saaya, i know u can lock the agp/pci on the a7n8x deluxe becuz i can lock it on my a7n8x-e deluxe :)
maybe i can get 3ghz with my waterchiller (2x55W+6x30W=280W tec power:D)
the DFI boards ive looked at dont have MB holes..unless its that colourful one....and im not paying a extra £20 for yellow PCI slots :(
can't wait to see :)Quote:
Originally posted by NoStra
The lucky bastard has a XPMW cpu... man. A XPMW Mobile barton, that should do 2.9Ghz on water.... with a bit of luck ;) You can imagine what it whould do on a triple cascade!
:( 2.08V is higest what I can run stable. I tryed to do 2.3V mod, but it didn't work?Quote:
Originally posted by NoStra
Go for the ASUS A7N8X.... There is a new Vmod for it...so you can give the cpu 2.3V or more.
If you can get 2700 on air ... simple phase might top 3 gig.
I'm betting on OPP's cascade(and skill !) to pull 3.1-2 out of it.
I hope my modded mach1 will get me up there too, but i'd be happy with a good 2.8 :)
Both Infinity and LanParty B have mounting holes.Quote:
Originally posted by Overlag
the DFI boards ive looked at dont have MB holes..unless its that colourful one....and im not paying a extra £20 for yellow PCI slots :(
Which ones you looking at?
if you're looking at pics on DFI's website or CPUCity, if you look very closely, there ARE mounting holes.Quote:
Originally posted by Overlag
the DFI boards ive looked at dont have MB holes..unless its that colourful one....and im not paying a extra £20 for yellow PCI slots :(
they took the photo with something red underneath the mobo :rolleyes:
lol :rolleyes:Quote:
Originally posted by unrealneo
if you're looking at pics on DFI's website or CPUCity, if you look very closely, there ARE mounting holes.
they took the photo with something red underneath the mobo :rolleyes:
http://www.overclockers.co.uk/acatal...herboards.html
bottom one here...?
yes thats it. it has holes.. i have 3 of them. they do have holes.
I have the exact same stepping as OPPAINTERS CPU . Mine is batch 0038 though .
With my relative noobness I have it priming @ 245x11 with 1.95-2.0v Vcore on my LP B with a stock vapo PE .
I can crank it up to 2800mhz within windows , but it wont run a bench at that speed .
I am so hoping prime does not crash :)
It sure beats my old NF7-S which could never run high fsb/vcore and high CPU clock all at once .
Cheers
@ opp
May I ask why you are going to oc an XP again while we have such nice things like A64 and P4EE ? :)
http://www.xtremesystems.org/forums/...787#post354787Quote:
Originally posted by jan
@ opp
May I ask why you are going to oc an XP again while we have such nice things like A64 and P4EE ? :)
OPP
Oh, missed this, thx.
Got the mobo today,
It says NFII ULTRA Infinity on the Box.
OPP
Thats a Rev A (only one of Infinitys). Should be very good to you. Ive ran 3d at 260fsb.
ok, sorry again for jumping in on someone elses thread, but would a old (i mean OLD first rev) Swiftech MCW462-B fit this board? might use my TEC's again :)
Aye, good stuff OPP. :)
12-10 BIOS will be your friend. Allows high FSB and very fast per clock on BH-5 (and I know you have some).
Cant wait to see the numbers this setup will make, Barton's havent seen the mega-OC light since March last year.
Good luck with the infinity, OPP :)
I hope you can get it going high fsb and high vcore together. I have to wait till I get a LP B as an exchange for my 3rd dead (crappy) infinity :(
With 268x11 it locked up due to the heavy load on components :mad: I only have a locked barton 2500+ being not extraordinary at all. Considering to try a new mobile now too :)
And with your extreme XT, cooling and clocks it should be easy for you to break 25 if not even 26k ;)
You have tryed the new voltmod? The old one gave me only 2.1V... The new one can give me 2.3V and more..Quote:
Originally posted by Electroid
:( 2.08V is higest what I can run stable. I tryed to do 2.3V mod, but it didn't work?
Can you post the details? ThanksQuote:
Originally posted by NoStra
You have tryed the new voltmod? The old one gave me only 2.1V... The new one can give me 2.3V and more..
It is for the ASUS A7N8X..Quote:
Originally posted by RAMMIE
Can you post the details? Thanks
http://www.fewture.cistron.nl/vcore_mod.jpg
do the a7n8x deluxe voltmod's work on the a7n8x-e deluxe's?
Yes!Quote:
Originally posted by r3b0rN
do the a7n8x deluxe voltmod's work on the a7n8x-e deluxe's?