Printable View
some memtest going goood :)
101.3 x 48 @ 1.336v / 2700 CL10.12.12.26 1T LB6 @ 1.680
http://i.imgur.com/kGeeU.jpg
http://i.imgur.com/kGeeU.jpg
http://i.imgur.com/FA1mr.jpg
at this time is beating my 2800 CL11-13-13-35 1T LB6 tight :D
some hyperpi32
running
http://i.imgur.com/oIdIs.jpg
stopped
http://i.imgur.com/n6pIk.jpg
pushing a lit bit more the CPU
http://i.imgur.com/lAkNM.jpg
Nice! Bet that cpu can go higher :p
These new hyk0 kits are looking quite good, my Samsung lp hyk0 sucked so bad sadly :/
Thanks mateQuote:
Originally Posted by Ivanlabrie
i always been unlucky with HYK0 i wish i can do stable 2800Cl10.12.12. but no
so far its stable like this
i stood with my fav even nrs :)
5GHz HT @ 1,472 load / 2666CL10-12-12-26 1T tRFC 128 TSWR 4
http://i.imgur.com/uycjS.jpg
http://i.imgur.com/vbQkQ.jpg
http://i.imgur.com/B9ynh.jpg
looking nice there man on that 2666 , latency of 28 ns wow , what kind of temps you hitting ?Quote:
Originally Posted by andressergio
thx man look the RealTemp Screen it was 27,4C in ma Rooom and dont even hit 80C and chip NOT delidedQuote:
Originally Posted by the_real_7
Very good chip, or little glue between ihs and die...pure win either way.
Gracias amigo but i didnt remove IHS as its a cold chipQuote:
Originally Posted by Ivanlabrie
Oh, gotcha...no need for that though, seeing it's a low vcore chip.
yes but u know 5GHz on IVY for daily aint easy i can bench and do lot of stuff at 1,436 but for real stable for all games app all is thatQuote:
Originally Posted by Ivanlabrie
tight as it says
http://img842.imageshack.us/img842/6407/capturafx.jpg
Uploaded with ImageShack.us
http://i.imgur.com/U2AVH.jpg
24/7 settings
Why so many volts l0ud ?Quote:
Originally Posted by l0ud_sil3nc3
Seems like some guys here having problem running this kit at rated specs.Quote:
Originally Posted by l0ud_sil3nc3
Maybe the 3rd timing is too tight, resulting in high vdimm?
Quality seems to vary on these kits, but on the run above, I am pretty sure this is because subs are tightened, time is fast for 4 ghz - on auto timings my kit easily does 2800 at 1,68v even on M5 gene, which is imho no good mem clocker compared for example to asrock formula
http://www.abload.de/thumb/tridentx2...c1016nkun6.jpg
i have 2 and first one do as expected but cant tight it and cant do SPI32 2800CL10, second kit i can tight it to hell but again cant do SPI32 at 2800CL10Quote:
Originally Posted by websmile
yes but thats XP all my friends runing XP dont have trouble doing 2800CL10Quote:
Originally Posted by websmile
I have by chance win7x64 which I installed for country cup as I owed someone a vantage - as the 2666 are pending I took a couple of cheap kingston and found at least on these no difference to xp 32 apart from 7 being slow and I am not liking it very much :D - maybe you are right on c10, this I might test when I try my 2400c9 platinums on board that has no compability issues like the f..... gene with them :) - I took safe range voltage to be sure this works but also low enough to see if there is difference, 1,63v on the Kingston
http://www.abload.de/thumb/1400c1116...gstonk3u2r.jpg
i can pass some loops of SPI32 tried till 1,8 still no luck with 2800CL10.12.12. even with 2800CL11-12-12 no luck so far score of SPI32 at 2666CL10-12-12-25 1T tRFC 96 and other tight timmings passes my 2800CL11.13.13.35 GSkill hynix very tightQuote:
Originally Posted by websmile
6:33SPI against 6:37 daily setup
Quote:
Originally Posted by andressergio
Honestly Andressergio I did not even bother testing lower voltage except this one at 1.65v
http://i.imgur.com/pJDja.png
1.85v seems harmless to Samsung ic's as well:)
i wasnt mean to tell you that using that volts is wrong, im just surprised with the variaton of OC on this kits i see some ppl 2800CL10 stable i had 2 kits and no go yes i can boot and do things but no goQuote:
Originally Posted by l0ud_sil3nc3
sorry if i explained wrong
samsung takes nice volts mines are running at 1,7
Andre seems ur second kit is not bad, ill have a retail kit this week and try some tests as well.
no not at all maybe at 1,85 can do 2800Cl10 stable but i wont run that volts 24/7Quote:
Originally Posted by hiwa