Hey, sorry I missed your post. Yes its half of the 16gb ripjawsz kit.Quote:
Originally Posted by l0ud_sil3nc3
Printable View
Hey, sorry I missed your post. Yes its half of the 16gb ripjawsz kit.Quote:
Originally Posted by l0ud_sil3nc3
3570K @ 4.5GHz 1.3v
Asus M5G BIOS 881
Team Xtreem 2600C10 2x4GB @ 2600MHz 10-12-12-28-1T 1.65v
WC gear: HF + D5 EK Top + EK X2 250 Res | 2x RX360 + 12x GT 1850
http://i458.photobucket.com/albums/q...h84/IVY/45.jpg
Got this baby and a 3770K now, coming i7 960 @ 4.2Ghz and damn this is so great :D
Thank you for this nice topic :yepp:
http://img259.imageshack.us/img259/3...ghz8192ghz.png
Uploaded with ImageShack.us
I dont want to OC this for daily use, just find the less necessary volts and roll.
Cheers
Congrats!Quote:
Originally Posted by ToyTen
Nice!Quote:
Originally Posted by owikh84
Ive been looking at the 2600mhz kits available, have you tried going any higher? If you do, please post your results.
Playin with my Gene now. Lots of memory settings.
damn, where did you buy the 2800 kit from?Quote:
Originally Posted by Dumo
Switched to the Crucial 1866 kit. Cant get them to run very high, but they do fairly tight timings at 2200. First try was 2200 9-9-9 LB 12, second run 2200 9-9-8 LB5.
Needed to set Rec. slew-2 and Trans slew-3, to get Latency Boundary 5 to pass at 9-9-8. With tight timings, lost about 1 second in 32m going from 2600c10-12-12 with the Samsungs to this.
Asus just updated their M5G website to support the Ivy CPU's:
http://www.asus.com/Motherboards/Int...s_V_GENE/#CPUS
2666 10-12-12 @ 1.65v, 32m passed but LinX failed :(Quote:
Originally Posted by OC Nub
http://i458.photobucket.com/albums/q...K472666spi.jpg
Any idea on how to push G.Skill RipZ 2400 9-11-10-28 to 2600 at least passing 32m?
i've tried 2600 10-12-12-31-2T @ 1.7v, VCCSA 1.15v, VTT 1.05v it just keeps failing 32m :(
Try this Owik http://kingpincooling.com/forum/show...20&postcount=6Quote:
Originally Posted by owikh84
NewEgg has 3770k in stock. http://www.newegg.com/Product/Produc...&SID=u00000687
I heard amazon has them for 290.00 but cant find the Link. Also MC add shows 289.00 http://cdn.overclock.net/a/a6/a6ea384f_DSC06449.jpeg
http://www.tigerdirect.com/email/WEM...-email_WEM3093
http://www.microcenter.com/single_pr...uct_id=0388577
http://us.ncix.com/products/?sku=705...ufacture=Intel
TY for the Links Rattle :up: TRB
woohoo let the madness begin
your welcome lol
Gotta add the cost of LN2 for binning this baby:)
Still pretty good on 1.65v.Quote:
Originally Posted by owikh84
@Dumo, Let the binning begin!
Looks like you wont have to try so many chips this time around.
default OC profileQuote:
Originally Posted by Dumo
set dram 2600, 1.65-1.75v vdimm, 0.925-1.2v VCCSA, 1.05-1.2v VTT
load up Hynix profile,
transmitter slew 4-4-5-5
DRAM Write Additional Swizzle disabled
tried 4 sticks pair combo
no go :(
maybe i got a bad kit or i'm just a noob LOL
@ OC Nub, sry it's 1.66v
try not going too specific first and just set 2600 ratio with the primary timings desired and set CHA/B Data Vref to 0.500
I got my second CPU a 3770K . But imc looks verry bad ! Same settings with my 3570K is not running . I always get Postcode 23 .
alrightQuote:
Originally Posted by LardArse
RipZ 2400C9 @ 2600 10-12-12-31-2T
vdimm 1.88v, VCCSA 1.175, VTT 1.05v
CHA/B Data Vref 0.5v
no mem preset profile selected
transmitter slew auto
DRAM Write Additional Swizzle auto
http://i458.photobucket.com/albums/q...1175105spi.jpg
Oh its finally here. Is the main difference btwn 35xx and 37xx cpus only a slightly smaller L3 cache?
Quote:
Originally Posted by owikh84
ok now change the settings one by one back to where you were and tell me what caused it to fail? :D
edit
1.88v is vdimm is too much for those sticks under non-ln2 conditions, they get worse at that voltage on air, you sure thats what they like?
Board posted a few times and now won't even make it to BIOS.
Any thoughts?
What code are you getting?Quote:
Originally Posted by NoGuru
It says 62 then just hangs there. Reset CMOS and pulled battery.Quote:
Originally Posted by OC Nub
If I make it to 62 it normally boots. You on latest bios, 0881?Quote:
Originally Posted by NoGuru
62 says Installation of the PCH Runtime Services.