Gskill F3-17000CL8-D

Printable View

Show 100 post(s) from this thread on one page

03-17-2011, 08:16 AM
l0ud_sil3nc3

Quote:

Originally Posted by PolRoger

Looks good stasio and l0ud_sil3nc3 what kind of secondary settings/timings are you running with your kits?

well

I believe everything was on auto except TRFC (110).

I too am curious as to what I can set the subtimings on these as I have no idea what will work and what will not
03-17-2011, 08:54 AM
C-N

Quote:

Originally Posted by l0ud_sil3nc3

well

I believe everything was on auto except TRFC (110).

I too am curious as to what I can set the subtimings on these as I have no idea what will work and what will not

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

I run 2133 @ 1.58 & 2222MHz 1.64v with the below settings

Code:

Advanced Memory Settings: System Memory Multiplier (SPD) ........................[ 21.33 Performance Enhance ...................................[ Extreme DRAM Timing Selectable (SPD) ..........................[ Quick Channel Interleaving ..................................[ Enabled Rank Interleaving .....................................[ Enabled Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ......................................[ 8 tRCD ..................................................[ 9 tRP ...................................................[ 8 tRAS ..................................................[ 20 performance gain tRC ...................................................[ 2 tRRD ..................................................[ 1 tWTR ..................................................[ 3 tWR ...................................................[ 1 tWTP ..................................................[ 12 tWL ...................................................[ 6 performance gain tRFC ..................................................[ 67 performance gain tRTP ..................................................[ 3 tFAW ..................................................[ 32 Command Rate (CMD) ....................................[ 1 IO Latency ............................................[ 2/Auto Round Trip Latency ....................................[ Auto

Edit: Corrected timings

They make this in Super PI & AIDA

http://i106.photobucket.com/albums/m...822224W2K3.png

http://i106.photobucket.com/albums/m...i/55202220.png
03-17-2011, 10:59 AM
Dumo

Quote:

Originally Posted by C-N

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

Wow, awesome runs there C-N:up:

Thanks for sharing info
03-17-2011, 11:21 AM
l0ud_sil3nc3

Quote:

Originally Posted by C-N

Not that I find it makes a lot off difference in real life but I've pulled my set in as tight as they will go for 24/7 running at 2222MHz, cant remember the settings off the top of my head but I'll post up my UD5 settings later if you want.

I run 2133 @ 1.58 & 2222MHz 1.64v with the below settings

Code:

Advanced Memory Settings: System Memory Multiplier (SPD) ........................[ 21.33 Performance Enhance ...................................[ Extreme DRAM Timing Selectable (SPD) ..........................[ Quick Channel Interleaving ..................................[ Enabled Rank Interleaving .....................................[ Enabled Channel A Timing Settings: ##Channel A Standard Timing Control## CAS Latency Time ......................................[ 8 tRCD ..................................................[ 9 tRP ...................................................[ 8 tRAS ..................................................[ 20 performance gain tRC ...................................................[ 2 tRRD ..................................................[ 1 tWTR ..................................................[ 3 tWR ...................................................[ 1 tWTP ..................................................[ 12 tWL ...................................................[ 6 performance gain tRFC ..................................................[ 67 performance gain tRTP ..................................................[ 3 tFAW ..................................................[ 32 Command Rate (CMD) ....................................[ 1 IO Latency ............................................[ 2/Auto Round Trip Latency ....................................[ Auto

Edit: Corrected timings

They make this in Super PI & AIDA

C-N you have a beast of a chip:shocked:

thanks for the sub timings, I am going to try them when I get back to house later:up:

getting close 5.5xx on 32m:clap:
03-17-2011, 12:33 PM
Hondacity

thats so awesome C-N!!!

bravo!
03-17-2011, 02:41 PM
owikh84

Intel Core i7 2600K @ 5.0 GHz (4C/8T)
Asus Maximus IV Extreme 1298
2x2GB G.Skill RipjawsX F3-17000CL8D-4GBXMD 2133C8 @ 2133Mhz 7-9-7-20-1T
2x MSI GTX580 SLI, 930/4100Mhz
Corsair AX1200
http://i458.photobucket.com/albums/q...37-9-7linx.jpg

second round with lower VTT and improved GFlops...
http://i458.photobucket.com/albums/q...337-9-72-1.jpg
03-17-2011, 03:03 PM
l0ud_sil3nc3

@ owikh84

set linx to run on 4 threads only and your gflops will increase as it is harder to pass this way
03-17-2011, 03:53 PM
owikh84

Quote:

Originally Posted by l0ud_sil3nc3

@ owikh84

set linx to run on 4 threads only and your gflops will increase as it is harder to pass this way

Initially i had the same thought. But not for now, higher GFlops doesnt mean more stressful. 4 threads is easier to pass, since u got shorter time between 2 runs which is faster to run away from errors. Anyway just my POV.
03-17-2011, 03:58 PM
flesheatinvirus

Nice stix C-N.:up:
03-17-2011, 05:47 PM
cstkl1

nice.. thats 1.68v set dram bios read 1.66, real vdimm around 1.67 approximately
03-18-2011, 01:38 AM
C-N

Quote:

Originally Posted by Dumo

Wow, awesome runs there C-N:up:

Thanks for sharing info

Quote:

Originally Posted by l0ud_sil3nc3

C-N you have a beast of a chip:shocked:

thanks for the sub timings, I am going to try them when I get back to house later:up:

getting close 5.5xx on 32m:clap:

Quote:

Originally Posted by Hondacity

thats so awesome C-N!!!

bravo!

Quote:

Originally Posted by flesheatinvirus

Nice stix C-N.:up:

Thanks guys :up:

SB rocks but with these GSkills it rocks a little harder :D

I'd be interested to see how people get on tightening the subs up keep us posted.
03-20-2011, 02:39 AM
l0ud_sil3nc3

http://i54.tinypic.com/2vwy3if.jpg
03-20-2011, 03:29 AM
Punisher!

Quote:

Originally Posted by l0ud_sil3nc3

http://i54.tinypic.com/2vwy3if.jpg

Great OC! VDDR?
03-20-2011, 03:38 AM
l0ud_sil3nc3

@ Punisher!

1.68v
03-23-2011, 08:21 PM
Elmy

Just ordered mine... Can't wait to see what these can do :-)
03-28-2011, 03:16 PM
Dumo

Got this one http://www.newegg.com/Product/Produc...82E16820231453
03-31-2011, 09:51 PM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

Got this one http://www.newegg.com/Product/Produc...82E16820231453

curios to see if they perform any better than the 2133 set
04-01-2011, 12:29 AM
Dumo

Quote:

Originally Posted by l0ud_sil3nc3

curios to see if they perform any better than the 2133 set

Will test it soon.

Heres C8 on MIVE

http://img850.imageshack.us/img850/2...nshot003se.png
04-01-2011, 08:04 AM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

Will test it soon.

Heres C8 on MIVE

http://img850.imageshack.us/img850/2...nshot003se.png

you mean c6 right, or do you meant his is the c8 set running at 6-9-6?

regardless 2133 6-9-6 looks great:up:
04-01-2011, 10:18 AM
Dumo

Yep, C8 set running at 6-9-6
04-01-2011, 12:49 PM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

Yep, C8 set running at 6-9-6

I think you have a nice set of memory there, what were your secondary timings?
04-01-2011, 12:56 PM
PolRoger

Quote:

Originally Posted by Dumo

Will test it soon.

Heres C8 on MIVE

http://img850.imageshack.us/img850/2...nshot003se.png

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?

I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?
04-01-2011, 01:50 PM
l0ud_sil3nc3

Quote:

Originally Posted by PolRoger

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?

I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?

here's a little 6-9-6 2133 action at 5ghz

http://i54.tinypic.com/161bwoy.png
04-01-2011, 06:36 PM
Dumo

Quote:

Originally Posted by PolRoger

Looks good Dumo... How about a SuperPi 32M @ 6-9-6?

I'd seen that 2200 C9 kit on GSkill's site. Do you think you'll end up posting here or start a new thread?

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(
04-01-2011, 07:05 PM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(

no way f(l)uckin worst:(

Show 100 post(s) from this thread on one page