At 1866 mine run at 6-9-6-24 1.67V at 1866
1950 about 1.7v!
Printable View
At 1866 mine run at 6-9-6-24 1.67V at 1866
1950 about 1.7v!
Mine bsod at 1866-8-8-8
:(
It will do the stick dont like TRCD lower than 9 on these sticks!
Mine clock high so maybe its your bios or board? Im done benching them because im running 4 sticks now and my board wont post anything less that 8cl with all 4 sticks,Im waiting for asus to put out a new bios.
I'm thinking of getting either the 17000C7/17600CL7 or 17000CL8 kit for my P8P67 Pro.
All of them 'seem' to 'clock about the same.
Would you recommend any particular one of them and what can i expect in terms
of speed vs timings at around 1.6 - 1.65 VDDR ?
I did some testing today..with this kit :D
A was able to run them :
/@800 6-7-6-27@1.64v
/@930 7-8-7@1.64v
/@1066 7-9-7@1.66v
How much Qpi/vtt is needed for 1066??Because they are not stable at tose clocks (7-9-7-27 @1.66 from bios)
So far my setup seems nice and stable at 4.6Ghz 1.26v with ram at 1909-7-9-7 for 24/7 clocks but of course I would like to use these rams at their rated speeds as so far they offer no performance gain over my Kingstons at near half the price.
:rolleyes:
What program do you guys use to set ram timings on the fly?
Also, has anyone had problems with these on Asus motherboards? My first set of these had a faulty stick, now the new ones have arrived and they memtest fine but Im getting weird symptoms of instability even at 2133 and now down to 2100. Im about to try another set of rams but its looking pretty bad for these.
:)
Hey bro2000,can you set 6-9-6 at 2133 with 1.75V and boot?I have a strange issue with maximus,they will scale with 6-10-6 till 1.8V and reach high speeds,but with TRCD9 they wont post at 1.72+,just stuck at 2F memory code?
Get same results with 6-9-6 at 2133 now with new bios!
GSKILL RipJawsX F3-17600CL7D-4GBXHD Review
;)
It's in Greek..but you can see the Charts/Results.
Hi, anybody running 8GB of these? I'm considering a second kit for my Max4X but I'm not sure what it will do for my clocks... Will I be able to maintain DDR2200 C7-10-10-27 T1 on [Auto] 1.647V? Tx!
OK, tested 4 dimms & all I can say now is: DON'T DO IT.. stay away, save your money & get a 2x4GB 1866 C9 kit instead, because 4 of these dimms can not do that on my M4X..Quote:
Originally Posted by rabor
On the other hand, my new kit is a tad faster than my older kit, so I'm keeping these ;):
http://i.imgur.com/KT4i1.png
nope 8GB's do not work at rated speeds
Just got a set of these yesterday, haven't had a ton of time to play with them but got to 2133 7-9-7-24-1T w/ 1.65v, going to see if I can get up to around 2200.
I have two sets of these sticks that play nice with my ud5.:up:
FEV
is that 4sticks? or 2sticks?
Holy moly, those settings are unbelievable. what voltage do you have running through that (including vccio/qpi?)Quote:
Originally Posted by flesheatinvirus
That was two sticks there HondaQuote:
Originally Posted by Hondacity
About 1.7v though the other settings I would need to quickly look up again as that system is off right now and I don't remember.
These look exactly the same as my kit, however mine are rated for 2133mhz CL7. I've pushed mine up to 2150 CL7 and no problem at 1.6v. I wonder if i should try 1.7v for CL6... Im scared. Goob job G.SKILL, these look like winners. :)
Same sticks
1.7V
http://content.hwigroup.net/images/u.../013838-12.jpg
Nice!
I got mine to that + a little above and with a few 32m tests it looked like tightening my timings (at least the 3rd one and 4th one) didn't seem to impact my time at all, it actually was slower in a couple of the runs. I currently have them sitting at 7-10-9-27-1T @ 1.65v and it seems plenty happy, got them up to 2286 (1143 in CPU-Z [107x21.3 multi].
Boot-up at 5.38GHz, 1.7vdimm, ran spi32m at 6m11.125s :)
http://img851.imageshack.us/img851/5...25s5378ghz.jpg
CPU-Z Validator 3.1