124 can also be caused by ram instability.
Printable View
124 can also be caused by ram instability.
some of my friend also Sell their Elpida Hyper MGH-E
and buy some other RAM ICs for 1155
Awww, and here I am searching for them Elpida Hypers... :DQuote:
some of my friend also Sell their Elpida Hyper MGH-E
the hypers can reach like 2000 cas7 even higher.. So far the ripjawsx bbse's clock rather good but the timings arent as good as the mghe's..
tell your friends to let us know when they sell hypers everyone wants them :rofl:Quote:
Originally Posted by PatRaceTin
wish had of known just sold my Hypers!Quote:
Originally Posted by dinos22
Leave some for us.... :DQuote:
tell your friends to let us know when they sell hypers everyone wants them
I've gotten my Hypers to do below. My PSC equipped sticks are having trouble at these settings for some strange reason.
Edit: Image too big. Change to smaller one.
Link to larger image : http://i402.photobucket.com/albums/p...133c7_Edit.jpg
http://i402.photobucket.com/albums/p...33c7_Small.jpg
Perfect.... looks like there's no problem there 2133 CL7 @ 1.66v :up:Quote:
Originally Posted by maxxx
Do they just plain work for you or have you found the secret?
@C-N: Besides giving a bit of QPI/VTT (set 1.16v in the bios), they work just like that. I dunno of any secret to this yet.
Cool, they look like they are running perfect to me. Maybe its all down to the chip for the people having problems running Hyper :shrug:Quote:
Originally Posted by maxxx
Hmm,do not really think so.For example,i can't run 2133 with 9-9-9 S-pi 32M with my hypers at any voltage.I still hope it's mobo related(asrock extreme6) and not IMC.Same hypers run 1866 8-8-8 with 1.45 memtest so i guess 2133 would be a joke for them.
Definately vtt/imc related.. Golden chips can hit up to 107.3 or so, On average most chips i've seen hit around 103-104..Quote:
Originally Posted by Alex-Ro
Need to find more clue...........
http://img708.imageshack.us/img708/7657/hypers.png
These are the Hyper chips on the sticks I used in the bandwidth test 2133
My max mem OC for Kingston 2000c8 (HyperMGH-E) VTT -1,16 Vmem 1,8v
http://img577.imageshack.us/img577/500/hypery.th.jpg
My max mem OC for Kingston 2000c9 (BBSE) VTT -1,06 Vmem 1,7v
http://img337.imageshack.us/img337/3253/bbse.th.jpg
Try running the hypers at the same speed as the BBSE's in your screenys..Quote:
Originally Posted by Diabolo80
Not working.:( It's max OC:down:Quote:
Originally Posted by Johnny87au
I'm stuck in 1866 for spi32m. What a bummer.
http://hwbot.org/signature.img?iid=5...se&iehack=.jpg
If I could only do 2133......................
My kit: Super Talent Speed Series DDR3-2000 6GB (3x2GB) CL7 Triple Channel Memory Kit - WX200UX6G7
what volts have you tried to get 2133 stable and can it post at all with 2133 or is it a straight fail?
we need more info ocm
If you can't pull 1866 6-6-6 your going to have problems with 2133 7-7-7.
My run was with 1.72 vdimm.......but I can run it at 1.66.......the 1.72 vdimm is because my timings are super tuned.
Can't even run spi32m at defaut 2133MHz 9-9-9-28 T2.Quote:
Originally Posted by dinos22
I can boot in at 2133 no problem and its stable enough to run all 3D and most 2d benches. Just not spi32m at all.
http://i464.photobucket.com/albums/r...EMI/tRFC88.png
Tried max vdimm of 1.78v
QPI/Vtt 1.28v
SA 1.55
CPU PLL 1.9v
What else would you like to know?:shrug:
Same as me.
Loaded "Optimized Defaults",set memory to 2133,8-8-8-24,CR2,1.66V and 32M STOP on loop 2.:mad:
Btw,what is the difference in Auto/Normal for QPI/Vtt,SAV,PCH and PLL?
I didn't see in ET6 any changes(always on stock voltage!).
Above 5GHz,I passing now with DDR3 1600 and 6-6-6-18.
Up to 5GHZ 1876 very unstable,2133 no way.:shrug:
i cant even boot past 1.24vtt eeek