nice work imamage
Printable View
nice work imamage
I also got one retail 1090T today, quick test with 3DMark06 4,3GHz @ 1.45v nb 2,8GHz @ 1.4v.
That was done on second boot with this chip!:)
http://i882.photobucket.com/albums/a...g?t=1272472786
Asmola: cool, what series chip? U must post more and more (max validation, superpi,prime 95 etc). Uff, today? Il waiitng about 14 days :-/
wow great chip asmola! my 965c3 needs over 1.55v to bench 4.3 :) cant wait to play w/ one of these!
Something interesting here. It seems the CPU has great potential! Going higher...
It's about 150-200MHz over my best C3's with the same or similar voltage.
The voltage is set to 1,3875, but it's overvolting, according to cpu-z.
1 hour Blend:
http://j.imagehost.org/t/0640/1h-Prime95-Blend.jpg
The CPU:
http://j.imagehost.org/t/0789/IMG_2993.jpg
Currently testing the CPU only, but the Dominators ran 1800 cl6 just fine.
Here are some other tests with default frequencies and ram at maximum multi from bios - 1600MHz with CL6 timings.
http://hardwarebg.com/forum/showpost...postcount=4136
http://losprofesdelmaiz.files.wordpr...oh-my-dog2.jpg
Asus, where is my BIOS?!!!!
nice...with ths low voltage super!
Same us upper poster, 1010MPMW. I'm currently tweaking my Vista so i can start real overclockig.
Dont wanna mess my 24/7 system. This chip looks promising, 4,3GHz 3DMark06 was no-go
with my 965BE C3's with these ambients (27c currently) and aircooling.:up:
Quote:
Originally Posted by FlanK3r
Yup, I'm really surprised, didn't expect it. I think I can run it 4,3GHz full stable, now going to try the lowest possible voltage.
And I'm planning to replace my already old cpu-block with Supreme HF, which will give me a nice drop of 4-5 degrees, I hope.
At least that's what I saw in the tests.
Asmola: yes, know, this is crazy! And its not so ig voltage! Look it, 4.1GHz stable thinking.
What was your NB at in that prime test?Quote:
Originally Posted by I.nfraR.ed
I have the 1010MPMW also and it is doing great and it is fast it can do 3.8ghz at stock vcore wich is 1.275v when set to auto in bios on the Asus Crosshair IV formula 890FX and i have had it at 4.6ghz nearly stable and 4.45ghz totally stable on only 1.45v and it rocks on ln2
Maybe I should have tested with small/large fft, because the NB was at 2150. I'm currently making rough test of the cpu. The memory is at 1720 only.
I'm always testing the cpu first, some cinebench for a quick estimation. After that testing the cpu-nb separately and finally the memory again alone and together with the already known rough frequency and voltage of the cpu-nb.
And after all...I'm putting the three together and make some adjustements in the voltages and/or the frequencies.
I just got:
HDT90ZFBK6DGR
CCBBE CB 1012APMW
BATCH 0021 :D
Default volts are 1.3V for 3.2GHz and 1.225V for low power.
Just installed all drivers for Vista64 because I forgot to transfer my W7 Raid 0 array before selling previous mobo ... Will need to wait for W7 testing till later on next week.
New week.
I just got mine aswell.
HDT90ZFBK6DGR
CCBBE CB 1013CPMW
the rig pic is how you achieved 4.5ghz??????????????????
if so
well done!!
I knew the 470's were fast but i had no idea they beat up on the 5870's so badQuote:
Originally Posted by Asmola
http://i234.photobucket.com/albums/e...6/westmere.jpg
Hmh, everyone is positive about the 1010BPMW's , but i mailed a local shop here, and they have:
1015GPMW , with one specific as ' D00033 ' , so i guess that's close to the middle of the waffer? or almost as close.
Although gaining performance from that is perhaps a mythe ^^
Anyone els with this batch? was hoping to see some results before buying it. google doesnt know anything yet.
4.45 at 1.45v nearly stable is extremely good :up: that's a pretty low vcore for such a high clock, i wonder if it's due to the mobo or just the chip? i can run my 1055T at that clock at 1.55v nearly stable on a 790FXQuote:
Originally Posted by Riska
OMFG very good results, I cant believe the low vcore needed, i think the board is the reason why you can get such a low vcore with such high overclocks, with the giga:banana::banana::banana::banana: gpa890 udh3 i need 1.65 to get 4.2ghz prime stable (under a vapochill LS 250watt Version), I reckon the VRMS have something to do with it.
What phase layout does the formula have? 8+2? the gigabyte has 4+1, But the thing is voltage fluctuates from 1.625 down to 1.5v lol hence why i need a high voltage to keep the chip stable.
Your comparing a dual chip gpu to a single chip one,try putting it up against a 5970,.:DQuote:
Originally Posted by Hey Zeus
The GTX470 is the lower model to the GTX 480......both are single chip.Quote:
Originally Posted by moorhen2
Sorry,my mistake.:)Quote:
Originally Posted by Titan7171
I did some more (quick) testing, CH IV is still on it's way.. :( Too high ambients, 27c isnt very good for benching..
WPrime 32
http://img688.imageshack.us/img688/1/wprime32y.png
WPrime1024
http://img339.imageshack.us/img339/7383/wprime1024.png
Vantage CPU test, really quick test and tried only once, perhaps 4,3GHz is doable..
http://img580.imageshack.us/img580/1576/vantagecpu.png