Prototype CPU LGA 775-1366

Thermal Test Round


OC i750@ 4.005 MHz, 1.392 V


Prototype CPU LGA 775-1366
:lsfight:
EK Supreme HF
LOOP:
GT240 Stealth +
Tsunami_reser +
MCP655™@12V +
HDD Block Home made

Each one of the test had 20 minutes of idle, except the last test that only had 10 minutes, because the purpose was to stress the processor :eek: :eek:


Room Temperature: 27°C ..........Water Temperature: 28°C



EK Supreme HF

Flowrate: 1.62 GPM

http://img401.imageshack.us/img401/5886/ekoverc.png


Prototype CPU LGA 775-1366

"COLDCOPPER"

Flowrate: 1.52 GPM

http://img8.imageshack.us/img8/341/prooverc.png

I leave you unpublished photos of this good opponent


http://img43.imageshack.us/img43/904/ek00.th.jpg http://img22.imageshack.us/img22/6207/ek01.th.jpg http://img218.imageshack.us/img218/1727/ek02.th.jpg http://img98.imageshack.us/img98/3948/ek03.th.jpghttp://img15.imageshack.us/img15/4875/ek04.th.jpg http://img35.imageshack.us/img35/4266/ek05.th.jpg http://img132.imageshack.us/img132/7933/ek06.th.jpg http://img718.imageshack.us/img718/61/ek07.th.jpg
http://img688.imageshack.us/img688/6177/ek08.th.jpghttp://img29.imageshack.us/img29/1162/ek09.th.jpg http://img232.imageshack.us/img232/2771/ek10.th.jpg http://img140.imageshack.us/img140/5073/ek11.th.jpg http://img704.imageshack.us/img704/781/ek12v.th.jpg http://img263.imageshack.us/img263/6470/ek13.th.jpg http://img408.imageshack.us/img408/8274/ek14.th.jpg http://img706.imageshack.us/img706/6793/ek15.th.jpg
http://img517.imageshack.us/img517/3363/ek17.th.jpg http://img18.imageshack.us/img18/5796/ek18.th.jpg




.





.

now it has to be third party tested :3
i'm really curious if he detroned the king

Quote:

---

Originally Posted by jimmyxxx

now it has to be third party tested :3
i'm really curious if he detroned the king

---

jimmyxxx i am quite shocked,i really dont know what´s wrong with the people in the forum, i belive they still haven´t get over this test result. :rofl:

Eddy_EK, i compared my block with one that is supposed to be the best one. i did not make any comparison with just "any" block. :welcome:




.

Quote:

---

Originally Posted by JASSAF

jimmyxxx i am quite shocked,i really dont know what´s wrong with the people in the forum, i belive they still haven´t get over this test result. :rofl:

---

Actually, your claim "There is a NEW KING: (unofficial)") has a certain air of arrogance surrounding it, much like Fester. Even in his most confident product launch, I don't ever recall Eddy saying such a thing.

Quote:

---

Originally Posted by JASSAF

Eddy_EK, i compared my block with one that is supposed to be the best one. i did not make any comparison with just "any" block. :welcome:

---

This can almost be considered flame baiting. :rolleyes:

I am prototyping a waterblock with 0,2 mm channels which are 2 mm deep for my diplome work. With Flow Simulation it beats HK 3.0 by 2,5 degrees.

Quote:

---

Originally Posted by StatiS

I am prototyping a waterblock with 0,2 mm channels which are 2 mm deep for my diplome work. With Flow Simulation it beats HK 3.0 by 2,5 degrees.

---

I doubt any block released in the future can beat the HK by something as large as 2.5 degrees. Not on any processor heat output currently at least...

HK has bigger channels which are shallower which means I increased the surface area by a considerable ammount. Comparing real model with flow analysis model of HK I got 5% error in temperatures. So consider that those 2,5 degrees may be real in the near future.

Quote:

---

Originally Posted by Waterlogged

Actually, your claim "There is a NEW KING: (unofficial)")
has a certain air of arrogance surrounding it, much like Fester. Even in his most confident product launch, I don't ever recall Eddy saying such a thing.



This can almost be considered flame baiting. :rolleyes:

---

two famous phrases:

1- "je pense donc je suis" / "I am thinking therefore I exist." (DESCARTES) :yepp: :yepp:
2- "I'm the best" (Muhammad Ali) :clap: :clap:


.

ea avemaria parce, un poco mas de respeto para esta gente, que lleva AÑOS dandole a esto. Comentario Constructivo ;)
Hasta no ver un test de un tercero no se pueden asegurar este tipo de cosas, hay muchos factores a considerar; eso es como las encuestas de las elecciones, que gane mockus en una y que gano santos en otra no te va a dar certeza de cual sera el presidente. Y vos sabes que los gringos se toman muy a pecho este tipo de cosas ._.

Translation:

I ask him for a little more respect to you guys.
And also told him again, that one test doesnt mean anything, that the block should be third party tested, before making such statements.
It's like elections, one pole goes to one candidate and the other poles go to another, but the winner isn't known until last instance.

Quote:

---

Originally Posted by jimmyxxx

ea avemaria parce, un poco mas de respeto para esta gente, que lleva AÑOS dandole a esto. Comentario Constructivo ;)
Hasta no ver un test de un tercero no se pueden asegurar este tipo de cosas, hay muchos factores a considerar; eso es como las encuestas de las elecciones, que gane mockus en una y que gano santos en otra no te va a dar certeza de cual sera el presidente. Y vos sabes que los gringos se toman muy a pecho este tipo de cosas ._.

Translation:

I ask him for a little more respect to you guys.
And also told him again, that one test doesnt mean anything, that the block should be third party tested, before making such statements.
It's like elections, one pole goes to one candidate and the other poles go to another, but the winner isn't known until last instance.

---

jimmyxxx

Voy a escribir en español y me hace la segunda y les traduce: I write in Spanish and translate jimmy:

Yo me moleste mucho con Eddy_EK en como trató la revisión del XSPC Rasa realizada por Bentleya, en vez de valorar el esfuerzo por diseñar el bloque lo que hace es mandarlo a la mierda (:banana::banana::banana::banana:) por que el test comparativo lo realizo con bloques de baja perfomance.

Como decimos en nuestro país "TOME PARA QUE LLEVE" , el 1 de Mayo me llego el EK_Supreme_HF y realice la prueba comparativa con los resultados que ya conoce. Cuando fuí a titular el "POST" lo pense varias veces si debía colocar ese título, al final prevalecio el sentimiento por Bentleya ....Así que dije vamos a ver que piensa Eddy_EK cuando no valoran "su trabajo".

Si me quieren suspender, bloquear o expulsar pues me ire con mucho honor, pues defiendo mis principios de igualdad de trato.

Waterlogged me dice arrogante y Eddy_EK insinua que Bentleya oculta algo.....:rofl:. Estan en lo cierto... "I'm a BAD MAN" (Alí) y el que oculta algo soy yo: He creado el BLOQUE PERFECTO (The Perfect block) no se confunda con The Perfect Storm (with G. Clooney):).
En el adjunto está el test que realice hoy: con una temperatura de agua muy superior 29.1°C (1.1°C) al test realizado al EK_Sup-HF y al PROTOTYPE les toma una diferencia de 1,5°C y hasta más. Yo aspiro que la diferencia sea de 2,5°C :clap: En otras palabras EK y PROTOTYPE no sirven para nada.:eek:
Su nombre: COLDCOPPER QUAD.


"I am the GREATEST of ALL TIME" .... who said?

A mere mortal, DOCTOR, without knowledge of thermodynamics and fluid mechanics OVERCAME A LIQUID COOLING COMPANIES. :up:

COLDCOPPER QUAD.

.

you made a waterblock and you're comparing yourself to muhammad ali.

cool story bro.

Translation
-He stated, that he didn't like the atittude from Eddy towards the XSPC Rasa revision done by Bentleya. He also says, that making a waterblock needs a lot of effort, but eddy didn't care (bentleya's effort), only because he compared the waterblock to other lower performers.

-1st May, he recived the Supreme_HF, and he make all the testings that were published on last two-three pages (were the prototype is clearly a winner), and he was about to start a new thread, to show eddy how it feel's when your hard work (designing the water block) isn't take on count.

-He says, that if he gets banned or blocked because of his statements, he will leave with honor, because he defended his principles (equity of treatement).

-Now he states that he have really make the best watercooling block ( The perfect Block), the name of the waterblock is: COLDCOPPER QUAD

Quote:

---

Yo aspiro que la diferencia sea de 2,5°C En otras palabras EK y PROTOTYPE no sirven para nada.

---

He aims for temps difference in the order of 2,5 degrees (lower). In other words EK y PROTOTYPE are good for nothing [¿?]

And last sentence i belive can be read by everyone.

on the topic of your greatness

it looks like you could use some CNC work on the waterblocks. you didn't cut the channels the same depth each time. perhaps it is just the
offset of the radius of the slitting saw but still.

http://img215.imageshack.us/img215/2963/cpuproto10.jpg

@jassaf, coldcopper pics please! :D

@teyber, all that work was done by hand!, if he gets good temps with imperfections, how would it be CNCed? =)

Quote:

---

Originally Posted by jimmyxxx

@jassaf, coldcopper pics please! :D

@teyber, all that work was done by hand!, if he gets good temps with imperfections, how would it be CNCed? =)

---

yes it is a very nice block.

the comments are a little much

"I am the GREATEST of ALL TIME" :down:

Quote:

---

Originally Posted by teyber

the comments are a little much

"I am the GREATEST of ALL TIME" :down:

---

Yeah, i belive that too.
I'm waiting for the third party reviews, so he can say whatever he wants, in the mean time im just neutral

Thermal Test Round


OC i750@ 4.005 MHz, 1.392 V


COLDCOPPER QUAD


http://img704.imageshack.us/img704/3170/quad2.jpg



http://img341.imageshack.us/img341/2...copperquad.png

:welcome: :p: :p: :p: :p: :p: :p: :p: :welcome:

.

Piensas hacer una version que no sea en acrilico? buenos resultados, no habia pasado por el topico hasta hoy, impresionante bloque debo decir :)

Jassaf: how about rising voltage+higher overclocks? Most liquid cooled pc-s i've seen here were that of core i7 at 4.2-4.5GHz with ~ 1.4-1.45V. Probably 1.5x heat dump of i5@1.3V@4GHz (afterall, upping voltage&o/c gives temp/heatdump bump, and so does having hyperthreading on). The higher the heat dump, the more clear to see differences between waterblock performances imho

I would love to see some progress

Is Skinnee still going to test this?

While there may be some less-than-happy-ness about the air of smuggness in the posts, I think this is brilliantly made - As a goldsmith I was all about working by hand and making stuff, so this is impressive.

One thing to the op/designer ... if you plan on making these to sell, and keep working by hand, you may find your results vary dramatically... even if this prototype is slightly more efficient than the EK block, customers know that any block of that design will be pretty much identical. One off hand-produced is cool, but only a minute margine of error could make the next one less efficient than the EK block (or more efficient of course...). It might, if you want to make a buisness out of it, be an idea to get some CNC stuff.

Beautiful work though, if there's one thing in this world I appreciate its fine workmanship on this sort of scale. Well done.

*Is having a hard time with Jassaf testing method*

first, you test alongside a home made HDD block, which is basically a free variable too many.
second, I can't seem to find anywhere how many remounts you did. I really hope you didn't base this entire page of arrogance on just one mount, or even a cherry picked mount.