800D Blood+　Project

Printable View

Show 100 post(s) from this thread on one page

12-11-2009, 06:38 PM
noeru

3 Attachment(s)

next　time　Case two rooms to create a block of aluminum　panels

Attachment 99571

Attachment 99572

Attachment 99573
12-11-2009, 06:41 PM
noeru

3 Attachment(s)

Thank Aquatuning:)
Attachment 99574

Attachment 99575

Attachment 99576
12-11-2009, 06:49 PM
noeru

4 Attachment(s)

Slave runs out and Topufan
Bitspower G 1 / 4 "Black Sparkle 45 Degree IG 1 / 4" Adapter
Bitspower G 1 / 4 "Black Sparkle 90 Degree IG 1 / 4" Adapter
Cooler Master High Performance 120MM R4 Series RED LED Case Fan
Tygon R3400 1/2" ID (3/4" OD) UV Resistant Tubing - Black
Attachment 99577

Attachment 99578

Attachment 99579

Attachment 99580
12-11-2009, 06:52 PM
Weevil

http://www.xtremesystems.org/forums/...8&d=1260580838

Your dachshunds will thank you to quit smoking cigarettes.

The wires look beautiful BTW. ; )
12-11-2009, 07:00 PM
noeru

Quote:

Originally Posted by Weevil

Your dachshunds will thank you to quit smoking cigarettes.

The wires look beautiful BTW. ; )

Hello Weevil very very thanks
Exactly right! I just now, smoking cigarettes is to stop in the middle of the
12-11-2009, 07:39 PM
noeru

5 Attachment(s)

This is a test of flow
Attachment 99584

Attachment 99585

Attachment 99593

Attachment 99594

Attachment 99596
12-11-2009, 07:47 PM
noeru

5 Attachment(s)

And decided the line:up:

Attachment 99588

Attachment 99590

Attachment 99591

Attachment 99592

Attachment 99589
12-12-2009, 12:37 AM
Psydrop

really nice work noeru....
12-12-2009, 12:42 AM
shadow46x2

out of curiosity, why the one black line as opposed to all clear or all black?

--j
12-12-2009, 05:37 AM
buccaneer

Thanks for sharing your work Noeru! Have an800D here and need ideas.
have some questions:
do you intend to put the mid support foot back under the case? is it sagging or it that the picture?
what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!
12-12-2009, 07:26 AM
noeru

1 Attachment(s)

Quote:

Originally Posted by Psydrop

really nice work noeru....

Thank you very, very grateful:)

Quote:

Originally Posted by shadow46x2

out of curiosity, why the one black line as opposed to all clear or all black?

--j

Yes! This black line has no special meaning
I tried it out, I will revert to the original Tygon3603;)

Quote:

Originally Posted by buccaneer

Thanks for sharing your work Noeru! Have an800D here and need ideas.
have some questions:
do you intend to put the mid support foot back under the case? is it sagging or it that the picture?
what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!

Thanks for the question　　Sorry I'm weak in English
Room dividers will be rad support.　
Looking to put the rad? Put the rad outside the case?:confused:

Attachment 99614
12-12-2009, 08:48 AM
Weevil

It's alive!!!
12-12-2009, 08:49 AM
Weevil

Quote:

Originally Posted by buccaneer

what made you put the rads outside of the case? not enough room inside or do you yust like it?
Nice work!!

You seem confused, re-read thread from beginning.
12-12-2009, 11:10 AM
buccaneer

HI Noeru! Yes confusing you here :) sory for that! Was refering to the rad fans in the top. earlyer you showed all internal. too tight?
12-12-2009, 11:13 AM
Psydrop

buccaneer what rad are you talking about? Or has he sent you secret pics i can't see.
12-12-2009, 11:33 AM
buccaneer

Ha ha Only now I noticed that those fans are layinh lose on top of the case! indeed confuced me. nice work!!!!!!!
12-12-2009, 03:47 PM
triggs75

Very nice set up. Are you running one loop with all? Did you end up using both pumps or just the one. Ca you take a pic of the pumps in the bottom.

Great work

Chad
12-12-2009, 04:26 PM
Mabyboi

OOOO how are those fans?! i was looking at those. are they actually silent? can we get more pics of em?
12-12-2009, 04:40 PM
Osterman

Pretty nice work!.
I would like to ask you, which is the trip that the coolant makes on your system? and also, have you used 1/2 ID 3/4OD compression fittings for your tygon 1/2ID 3/4OD??
About the latter question, I will use the same specifications and well I am a little bit afraid that the compression wont be tight enough.
12-12-2009, 10:08 PM
exe163

Amazing job on spacing! I don't think you can put anything more to it.
12-13-2009, 04:37 PM
allig4t0r

Great wlog matey :] One question worries me - is your cute dog longer than xspc 480 or not?
12-13-2009, 05:24 PM
noeru

5 Attachment(s)

Quote:

Originally Posted by Weevil

It's alive!!!

Quote:

Originally Posted by Weevil

You seem confused, re-read thread from beginning.

hello Weevil I respect thank you dear represent:)

Quote:

Originally Posted by buccaneer

HI Noeru! Yes confusing you here :) sory for that! Was refering to the rad fans in the top. earlyer you showed all internal. too tight?

Quote:

Originally Posted by Psydrop

buccaneer what rad are you talking about? Or has he sent you secret pics i can't see.

Sorry I'm late:)

It is a thing of the Top rad data XSPC RX480 125mmx58.5mm 25mmFan press - you can :up:

Attachment 99712

Attachment 99713

Attachment 99714

Attachment 99715

Quote:

Originally Posted by buccaneer

Ha ha Only now I noticed that those fans are layinh lose on top of the case! indeed confuced me. nice work!!!!!!!

thank you　^^;　

Quote:

Originally Posted by triggs75

Very nice set up. Are you running one loop with all? Did you end up using both pumps or just the one. Ca you take a pic of the pumps in the bottom.
Great work
Chad

Yes, it is one loop. Consider from watching the water temperature to change the loop.
Now DDC3.25x2 XSPC Dual Acrylic Top for Laing DDC is.
Attachment 99716

Quote:

Originally Posted by MaByBoI

OOOO how are those fans?! i was looking at those. are they actually silent? can we get more pics of em?

SSD has taken the time to repair broken away
Yes, I want your photo shows ^ ^

Quote:

Originally Posted by Osterman

Pretty nice work!.
I would like to ask you, which is the trip that the coolant makes on your system? and also, have you used 1/2 ID 3/4OD compression fittings for your tygon 1/2ID 3/4OD??
About the latter question, I will use the same specifications and well I am a little bit afraid that the compression wont be tight enough.

Thanks for your question if the answer is, I ask you a question again
yes,this Tygon 3603or3400 is 1/2ID 3/4OD This could ensure the flow of many
11/8mm was previously

Quote:

Originally Posted by exe163

Amazing job on spacing! I don't think you can put anything more to it.

Thanks If your reference:)
12-13-2009, 05:38 PM
noeru

Quote:

Originally Posted by allig4t0r

Great wlog matey :] One question worries me - is your cute dog longer than xspc 480 or not?

haha;) airu is 32ｃｍ
she is Kaninchen Dachshund
12-13-2009, 07:17 PM
noeru

3 Attachment(s)

I was once where I validate the air flow case
http://www.xtremesystems.org/forums/...0&d=1260026065

Conditions: Each bench tests conducted in closed cases
Core I7 920
Xeon W3540
Xeon W3520
OCCT or PrimTHtest(3hr)
Attachment 99727

Attachment 99728

Attachment 99729
12-13-2009, 08:24 PM
noeru

4 Attachment(s)

Results:
Measurement place 6 points
・Aquatuning Thermosensor In- Out Thread G1/4　x2
　Top rad out　Watertemp　
　botom rad out temp
・Mcubed Thermosensor Push/Plugin Bronze 10mm　ｘ1
Reservoir
・Temperature Sensor　x3
　case out temp
Middle of the case
botom rad out air temp
Flowsensor is
・aquacomputer Flow sensor "high flow" G1/4
・aquacomputer aquaero

aquacomputer Flow sensor
Attachment 99745

botom rad out temp
Attachment 99744

Attachment 99746
OCCT I7 920 4336.3 coreV1.375V
Top rad out　Watertemp: 28.1℃　
botom rad out temp: 27.7℃
Reservoir　temp:27.5℃
case out temp：21.1℃
Middle of the case:25.8℃
botom rad out air temp 26.0℃
Flow 277.12L/hr
Fan is top 980rpm
botom 1000rpm or 1200rpm
Attachment 99747
Prim (3hr) xeon3540 4519.6 corev 1.376(BIOS1.45)
Top rad out　Watertemp: 26.2℃　
botom rad out temp: 25.8℃
Reservoir　temp:25.8℃
case out temp：21.5℃
Middle of the case:24.7℃
botom rad out air temp 24.7℃
Flow 281.27L/hr
Fan is top 980rpm
botom 1000rpm or 1200rpm
I am pleased with the outcome is:yepp:

Show 100 post(s) from this thread on one page

800D Blood+ Project

800D Blood+　Project