Stealth tube reservoir/clamps

Printable View

Show 100 post(s) from this thread on one page

02-06-2010, 03:27 AM
dingdong555

If anyone wants to see this res in a REAL PC, check my worklog - http://www.xtremesystems.org/forums/...31188&posted=1

You can see how awesome it really is.
02-06-2010, 07:00 AM
eKirts

Quote:

Originally Posted by iandh

I talked to Gary at Sidewinder and he said that there may be some delay getting them posted on his site, so if you want to get the reservoir/clamps without more wait, Petra's is probably your best bet.

There is a decent amount of stock, but quantities are somewhat limited until I get the next shipment out, so I wouldn't wait too long. I'm not necessarily trying to drum up sales, just being honest.

guess us Canadians are going to have to wait a little longer..... D:

I heard petra's will ship to Canada if you contact them... but if its coming from cali I wonder what shipping is like >.<
02-06-2010, 08:14 AM
Ketzer7

Just ordered mine

Name Code Qty Each Options
---------------------------------------------------------------
iandh SteathRes 225 IANRES-225 2 59.95
Multi-Option Reservoir
iandh SteathRes 175 IANRES-175 2 54.95
Multi-Option Reservoir
Subtotal 229.80
Shipping 18.40
Tax 0.00
Total 248.20

w00t! :party:

Thanks again iandh, can't wait to get them. :toast:
02-06-2010, 08:29 AM
century child

Quote:

Originally Posted by eKirts

guess us Canadians are going to have to wait a little longer..... D:

I heard petra's will ship to Canada if you contact them... but if its coming from cali I wonder what shipping is like >.<

Europeans are in the same boat. I need some of these asap and the delay for shipping will be bad enough without adding the delay in getting them added to the shop so I can order them. These things were shipped to Sidewinder about 2 weeks ago. What's the holdup?
02-07-2010, 03:34 AM
iandh

Quote:

Originally Posted by Ketzer7

Just ordered mine

Name Code Qty Each Options
---------------------------------------------------------------
iandh SteathRes 225 IANRES-225 2 59.95
Multi-Option Reservoir
iandh SteathRes 175 IANRES-175 2 54.95
Multi-Option Reservoir
Subtotal 229.80
Shipping 18.40
Tax 0.00
Total 248.20

w00t! :party:

Thanks again iandh, can't wait to get them. :toast:

Thank you very much for your order, I really appreciate the support.

At this point, every dime I make is going right back into building up my shop, followed shortly by the development and release of new products.

Quote:

Originally Posted by century child

Europeans are in the same boat. I need some of these asap and the delay for shipping will be bad enough without adding the delay in getting them added to the shop so I can order them. These things were shipped to Sidewinder about 2 weeks ago. What's the holdup?

Gary's had them for some time now, but he's very, very, very busy right now. Last I spoke with him he said there may be some delay getting them on the site.

I don't think there is any problem with petra's though, they also ship to europe afaik, you just have to shoot an email off.

If you aren't able to make something work through petras, and it is extremely time sensitive, let me know and I'll do the best I can to take care of you.
02-07-2010, 08:47 AM
century child

Thank you for the offer and willingness to help. I know the situation has got to be frustrating for you as well with your products being out there but not available for sale. Anyway, I'll try and arrange something first and contact you if it doesn't work out.
02-07-2010, 08:57 AM
eKirts

I know you probably wont be able to answer this but ill take a shot....lol....did he give you a time frame?....how long do you think this delay will be? a week... 2 weeks...?

holding my build off for this res >.< ... not a dire situation tho... I can wait :P ......maybe... haha
02-07-2010, 09:12 AM
Ketzer7

Quote:

Originally Posted by iandh

Thank you very much for your order, I really appreciate the support.

At this point, every dime I make is going right back into building up my shop, followed shortly by the development and release of new products.

Not at all dood, my pleasure! I didn't say anything before, but I also scored two of your 140.3 Stealth rad grills from Petra's the other day for the new build. They should be here Tues. and looking forward to them as well.

Between the Stealth res' and the Stealth grills, I might have a theme going here... :cool:

Whatever helps you keep rolling out sweet products like these, I'm totally behind supporting that. :up: Can't wait to see what's next
02-07-2010, 05:41 PM
Baulten

Urgh, was going to resist on ordering till Sidewinders had them.. but couldn't! Just ordered that and some fittings from Petra's! Can't wait for it!!! Looks so sleek!
02-08-2010, 03:35 PM
Bitemarks666

I emailed petras about international shipping and the are holding off doing for now until they get sorted from the move so it looks like sidewinders or going to IandH himself is the only options for now
02-10-2010, 07:03 AM
eKirts

hey guys, I bring good news ^-^

Iandh's res's have now been put up on sidewinder and are now available to international ppl :) good luck to all ^-^

Bought mine this morning about 2 minutes ago :D

THANKS IandH!!!!!!!!!!! ... and, I guess sidewinder :P
02-10-2010, 09:08 AM
century child

The res's yes but still not the holders. I hope they will follow very soon.
02-10-2010, 09:12 AM
eKirts

Quote:

Originally Posted by century child

The res's yes but still not the holders. I hope they will follow very soon.

could always buy the res and get the holders with it ... haha jk :P

wish you luck man
02-10-2010, 11:06 AM
Bitemarks666

Ordered 1 cant wait
02-10-2010, 11:54 AM
Waterlogged

Quote:

Originally Posted by eKirts

hey guys, I bring good news ^-^

Iandh's res's have now been put up on sidewinder and are now available to international ppl :) good luck to all ^-^

Bought mine this morning about 2 minutes ago :D

THANKS IandH!!!!!!!!!!! ... and, I guess sidewinder :P

Sounds like sloppy customer service to me. :rolleyes:
02-10-2010, 12:56 PM
eKirts

Quote:

Originally Posted by Waterlogged

Sounds like sloppy customer service to me. :rolleyes:

yeah, I'm inclined to agree
02-10-2010, 03:43 PM
Kenjiwing

Got my clamps today.. look great thanks!
02-10-2010, 06:59 PM
HazChem

The 225 is already out of stock at Sidewinders! :(
02-10-2010, 08:07 PM
iandh

Quote:

Originally Posted by HazChem

The 225 is already out of stock at Sidewinders! :(

More are on the way... I packed them up today as soon as I heard that stock was needed.

Should be early next week.

I sent a good amount of stock too, these are just selling pretty fast.
02-10-2010, 08:28 PM
.:R32

I would very much like these, but I have one question that I have not found the answer to yet, what are the dimensions of the mounting plate for the holders?

Thanks any info would be greatly appreciated!!!
02-10-2010, 08:44 PM
iandh

Quote:

Originally Posted by .:R32

I would very much like these, but I have one question that I have not found the answer to yet, what are the dimensions of the mounting plate for the holders?

Thanks any info would be greatly appreciated!!!

The dimensions are 1.3x1.5", and the mounting holes are spaced apart 1" on center, for M4 mounting screws. The screws (along with nuts) are included.
02-10-2010, 09:14 PM
.:R32

Quote:

Originally Posted by iandh

The dimensions are 1.3x1.5", and the mounting holes are spaced apart 1" on center, for M4 mounting screws. The screws (along with nuts) are included.

THANKS SOOOO MUCH, I'm sold:up::up::up:
02-11-2010, 11:15 AM
rxkevin

My res should be arriving any minute now. It arrived at my post office so hopefully it ships today.
02-11-2010, 09:41 PM
zeropluszero

hey Ian, i've just bought a Bitspower 250 res, and its got a 60mm diameter, i was looking to get a set of your res clamps for it, can you tell me if they will work, or if that'll over extend them?
02-12-2010, 07:02 AM
century child

Hello Ian, would you please check your PM's? I sent you one Monday but haven't heard back from you and I need your help. Thank you.

Show 100 post(s) from this thread on one page