xDuck, watch out, your fsb 1:1 record might be overtaken!!! these new dfi boards are smoking.
Printable View
xDuck, watch out, your fsb 1:1 record might be overtaken!!! these new dfi boards are smoking.
This statement will change if you have a DFI LP or Infinity and a the NEW BETA bios due out today or tomorrow.Quote:
Originally posted by Spec3
Sandra scores won't do the setup justice unless he has 10x multi or higher. A 3dmark or pcmark score would be kewl though
Check the LanParty thread in the AMD room...
http://www.xtremesystems.org/forums/...955#post298955
I want that bios for my 8rda+...
Wow nice scores and OC results :D. Today i was playing a little with my Memory Max FSB is now 252Mhz. I waiting now for my new P4 2.8C ;) Bye
http://www.slo-comp.net/upload/djtonic/news/250.JPG
http://www.slo-comp.net/upload/djton..._OC/248FSB.JPG
try with cpu at about 2200mhz with 246mhz 11-2-2-2Quote:
Originally posted by ricjax99
Id like to see how 280MHz FSB 1:1 @3-4-4-5 compares to to my 246MHz FSB 1:1 @2-2-2-11 sandra score (Stock board no mods btw ;) ) the board and memory are now sadly fragged but it was fun while it lasted. I managed 250FSB but only a 9.5x multi so nothing special but is shows what difference the multi makes when you compare my two scores
at 270mhz, DC 5-4-4-3, Cpu int Enable i manage about 3800mb/s with multy at 8x, barton cpu, if i remember right 83% efficiency
but now i'm trying with vdd mod, but can't understand why at 1.5v get the same results that at 2v... must find the problem..
dont do too much vdd, you may find that 1.6 or 1.7 is betterQuote:
Originally posted by Dirty_Punk
try with cpu at about 2200mhz with 246mhz 11-2-2-2
at 270mhz, DC 5-4-4-3, Cpu int Enable i manage about 3800mb/s with multy at 8x, barton cpu, if i remember right 83% efficiency
but now i'm trying with vdd mod, but can't understand why at 1.5v get the same results that at 2v... must find the problem..
Gimme a break...forgive me for being human and maybe a little tired. People ask stupid questions when their brain isnt working. :mad:Quote:
Originally posted by xDUCK
It's in the subject. :rolleyes: NF7-S rev 2. :)
Thx for the double smack down as well SoulB. You arent getting your MachII this Christmas as you are on the naughty list. :hehe:
Geez, a man asks a dumb question and people start throwing stones.
:flame:
so vdd mod is useless?Quote:
Originally posted by Stang_Man
dont do too much vdd, you may find that 1.6 or 1.7 is better
i have noticed that on my other nf7, but seems that with more vdd i can't boot at hight fsb like with less vdd, but i'm more stable at stable-limit fsb
for example, 1.5vdd bench 2d at 250, bench 3d at 240
1.8vdd bench 2d at 246/250, so less stable than with 1.5v, but 3d stable at 244mhz...
:slobber: my jaw just droped when I saw that. Your like god :O Congrats and keep it up. Just a bit more VDIMM and I know you can do 270 :banana:Quote:
since I can consistently POST at 275fsb (d18) at a mere 1.8v VDD...
argh, I can do 225DC or 233SC......
Well, dropping my memory back to 4/3, I've gotten 271 now. :) :cool:Quote:
Originally posted by afireinside
:slobber: my jaw just droped when I saw that. Your like god :O Congrats and keep it up. Just a bit more VDIMM and I know you can do 270 :banana:
drop it back more and see if you can push the nb into 290mhz+ territory?
:D
http://upl.mine.nu/uplfolders/upload3/261benchmark.jpg
2x512 Mb you want higher score?:=) . You only give me max fsb screens show me some benchmark scores!. This board roxx and my Abit NF7-S rev 1.2 sucked..only 250 sc full modded(lapped NB,SB) great cooling NB,SB vdd 2.4v+ ,vmem 3.2+ and more modds..
2.0 Are better...but show me some scores! :smileysex
:banana: :banana:
They are not too spectacular, I only get 39xx since it is 8x and SC... But I do have a 260DC screenshot. :)Quote:
Originally posted by Lastviking
http://upl.mine.nu/uplfolders/upload3/261benchmark.jpg
2x512 Mb you want higher score?:=) . You only give me max fsb screens show me some benchmark scores!. This board roxx and my Abit NF7-S rev 1.2 sucked..only 250 sc full modded(lapped NB,SB) great cooling NB,SB vdd 2.4v+ ,vmem 3.2+ and more modds..
2.0 Are better...but show me some scores! :smileysex
:banana: :banana:
Looks like these DFI's are the wave of the future, though - I hope to be picking one up soon!
248FSB @ CL2-2-2-11Quote:
Originally posted by ricjax99
Id like to see how 280MHz FSB 1:1 @3-4-4-5.......
http://mywebpage.netscape.com/ricjax9903/246x102211.jpg
http://mywebpage.netscape.com/ricjax9903/250sandra.jpg
http://downhill666.bei.t-online.de/2850Mhz.jpg
SKYNET, You may have noticed there was a lot more to my post than what you quoted. As mine had some bearing on other posts and opinions.
Just to refresh:
I said against 280MHz FSB 1:1 @3-4-4-5 not 248 @2/2/2/11, what was the point in your post? to make me look stupid or to simply prove you can do 61MB/s Int and 50MB/s float more in sandra using the 11.5x multi with a barton and a prommie/vapo/water against my 10x multi with a tbred B under a 1 and 1/2 yr old coolermaster HHC-001 and more recent Smartfan 2 on a board with no extra cooling, not even an As3'd northbridge and no vmods at all :rolleyes:Quote:
Originally posted by ricjax99
Id like to see how 280MHz FSB 1:1 @3-4-4-5 compares to to my 246MHz FSB 1:1 @2-2-2-11 sandra score (Stock board no mods btw ;) ) the board and memory are now sadly fragged but it was fun while it lasted. I managed 250FSB but only a 9.5x multi so nothing special but is shows what difference the multi makes when you compare my two scores
Xducks acheivement is far more fantastic, 266FSB not only a high number but it also has really low latencies to cope with too, coping with CPU-Interface and tight timings is far more stressful than just a high FSB and slacker timings than a $5 hoe ;)
My complete congrats Xduck, seriously kudos my man :toast: :toast:
Come to think of it this may have done the reverse on ya :p:
Oh and just top clarify, my score was donw with CH5 TWINX3200LL @2.9v (read as 3.01v) :banana:
Quote:
Originally posted by ricjax99
I said against 280MHz FSB 1:1 @3-4-4-5 not 248 @2/2/2/11, what was the point in your post? to make me look stupid or to simply prove you can do 61MB/s Int and 50MB/s float more in sandra using the 11.5x multi with a barton and a prommie against my 10x multi with a tbred B under a 1 and 1/2 yr old coolermaster HHC-001 and more recent Smartfan 2 on a board with no extra cooling, not even an As3'd northbridge and no vmods at all :rolleyes:
Come to think of it this may have done the reverse on ya :p:
http://digilander.libero.it/DirtyPunker/pc4000.JPG
this is not 280 but 265, cpu int enable, timings 2.5-3-4-11 with 2*A-Data PC4000, no vmods needed
it's another NF7-S V2.0 because the board that can do 280 cpu int disable can do it only at 7-7.5-8x, this can do around 260-265 cpu int enable but with any multiplier
i have noticed that ANY nforce2 can go much highter of FSB(around 10mhz sure) with 7-7.5-8x multiplier, so the problem is that this multiplier range is pretty useless.... the ideal range is form 9x to 11x, it's not too easy to find a mobo that can handle such hight mhz at such hight fsb... and i haven't seen a DFI that can do it right now (or only few, like 1), so DFI can be the best board, but at the same time can be a limited board if it can't handle much mhz... must wait to see, but probably with prescott incoming the A32 plataform will die immediatelly for the overclockers...
4 Lastviking
i can't see your shot, can you describe it?? :) how much bandwidth do you have?? and multiplier??
How are you guys getting more voltage to the vdimm, i have the vr cranked all the way and im only getting 3.24. My 3.3rail is at 3.4v. If I could just get more voltage i might be able to compete with you guys.
this was at 260x10 cpu interface enabled dual channel 2.5,3,3,11
http://home.comcast.net/~shrmytoon/3943sandra.gif
this one at 268x8 dual channel cpu interface enabled
http://home.comcast.net/~shrmytoon/268x8.gif
this one was done at 7x 272 dual channel cpu interface disable
Thanks for the info man, im definitly going to look into that. Pc Ice is ichin to mod my psu, maybe ill just let him.
Meh, to be honest, it's really easy, might as well do it yourself.Quote:
Originally posted by Shroomalistic
Thanks for the info man, im definitly going to look into that. Pc Ice is ichin to mod my psu, maybe ill just let him.
yeah, i hear ya there. i think i might.
yo duck... what is the actual +3.3 voltage read from an orange wire? thx
cuz mine in bios says 3.5 but on the wire it reads +4!
go by the wire.
The bios reading is never correct, and thats your ram you are reading likely
no its the I/O not the ram