OC Report :: OCZ Blade 3x2GB PC3-16000 CL7

Printable View

Show 100 post(s) from this thread on one page

10-06-2009, 05:51 AM
TONY GAL

[QUOTE=eva2000;4050215]ouch, if you test each 2GB module individually how does each do ?

my friend i test and 1 stick 2g and the same again.7-8-7-20 1,65 real 1,69 30 wrong to mem test i try again with 1,74 real 1,79 evga classifiied E760 and again 20 wrong only with 9-9-9-20 nothing wrong!!!
its fail the rams and i ask ocz and tell me that ask the boss and tell me what happened:(
10-06-2009, 05:54 AM
TONY GAL

Quote:

Originally Posted by hiwa

sent a kit like 2 weeks ago to rma, hope to get hypers
will post when they back ;)

my friend ocz i learn in greece hear have only that chips with black pcb with that ics :mad:
10-06-2009, 06:19 AM
Leeghoofd

My black PCB's worked fine till a few weeks ago... very good kit... but it had undergone some serious benching... one dimm fails now... other two have been used sunday in the SLI benching session... no hickups at all
10-06-2009, 06:28 AM
hiwa

on Blade series i think PCBs are all Black i tried a kit and see another friends kit all of them are old ics (848 batch )with black their proper pcb.
i have some plati series 1600 BBSE @ home and they have Blck PCB too.
10-06-2009, 08:31 AM
TONY GAL

i sent email about this to ocz and today answer me that the chips inside is not elpida hyper ,is elpida b die:yepp:
o my god!
10-06-2009, 08:41 AM
hiwa

Quote:

Originally Posted by tonygr

i sent email about this to ocz and today answer me that the chips inside is not elpida hyper ,is elpida b die:yepp:
o my god!

please take a pic or tell us the serial number if possible
10-06-2009, 09:00 AM
TONY GAL

Quote:

Originally Posted by hiwa

please take a pic or tell us the serial number if possible

the serial number of the rams chip i have write before some post.
the ram is 6gb ocz 7-8-7-20 16000 1,65 blade with black pcb!
serial OCZ 3B2000Lv6gk
10-07-2009, 10:05 AM
Fitseries3

would the blade 2000mhz cas 9 sticks have hypers or bbse? possibly something else?
10-07-2009, 07:20 PM
Ronbo56

Quote:

Originally Posted by eva2000

ouch, if you test each 2GB module individually how does each do ?

ouch any photos of the mess ??

Yes Sir but they did not come out to good. I'll try to post on friday when I get out of work a little early. I sent them back for a refund. I confirmed with OCZ tech that these were the original hypers and not the new MGH. According to OCZ they have not purchased any new versions of the elpida hyper IC's.
I'm sticking with my mushkin 998707, 998691 and ocz animals 1333 microns which I'm running right now. They can out run the mushkins as far as mhz goes but with higher latencies of course. :D
10-07-2009, 07:40 PM
Ronbo56

;)

Quote:

Originally Posted by Ronbo56

Yes Sir but they did not come out to good. I'll try to post on friday when I get out of work a little early. I sent them back for a refund. I confirmed with OCZ tech that these were the original hypers and not the new MGH. According to OCZ they have not purchased any new versions of the elpida hyper IC's.
I'm sticking with my mushkin 998707, 998691 and ocz animals 1333 microns which I'm running right now. They can out run the mushkins as far as mhz goes but with higher latencies of course. :D

Just a little start with my test starved animals

http://valid.canardpc.com/cache/banner/754977.png
10-07-2009, 09:45 PM
hiwa

Quote:

Originally Posted by fitseries3

would the blade 2000mhz cas 9 sticks have hypers or bbse? possibly something else?

old sticks are all Hyper, i am talking about 6/7 months ago sticks, the new sticks are all BBSE or maybe powerchip ..
10-08-2009, 04:09 PM
Ronbo56

Quote:

Originally Posted by hiwa

old sticks are all Hyper, i am talking about 6/7 months ago sticks, the new sticks are all BBSE or maybe powerchip ..

According to OCZ there are no new chips they are all hypers. (7-8-7-20).
10-08-2009, 06:38 PM
Kentaro

:)As everyone knows BBSE is not good at CL7 and CL6, so I guess all 16000 CL7 should be hyper only. Just dont know if all the old hyper chips would die easily or not. ;)
10-08-2009, 11:23 PM
hiwa

Quote:

Originally Posted by Ronbo56

According to OCZ there are no new chips they are all hypers. (7-8-7-20).

16000 cl9 are Hyper?
10-09-2009, 08:45 AM
TONY GAL

Quote:

Originally Posted by Ronbo56

According to OCZ there are no new chips they are all hypers. (7-8-7-20).

yes but not mnh hyper which is the best from all and wants only 1,65 7-8-7-20 2000 and not 1,76
10-09-2009, 08:50 AM
eva2000

AFAIK, OCZ Blade 2000mhz C7 and C9 are different memory ics. Pretty sure for 7-8-7-x they can only be elpida hyper whereas for c9 kits could be any ics that hit 2000mhz c9 i.e. elpida bbse, micron (animals) etc
10-09-2009, 09:02 AM
hiwa

Quote:

Originally Posted by tonygr

yes but not mnh hyper which is the best from all and wants only 1,65 7-8-7-20 2000 and not 1,76

some BBSE new DJ-F can handle 7-8-7-21 1.65 but 5% ?..

99.99.99% of 2000 Cl7 's are Hyper or MNH (old one) or MGH (last one)
10-09-2009, 12:56 PM
Marvin82

Quote:

Originally Posted by hiwa

some BBSE new DJ-F can handle 7-8-7-21 1.65 but 5% ?..

99.99.99% of 2000 Cl7 's are Hyper or MNH (old one) or MGH (last one)

BBSE with 7-8-7-21 @1,65VDimm :up:
I neeed this Chips :D my can only 7-9-7-19 72 @ 1,647VDimm
10-09-2009, 01:10 PM
hiwa

Quote:

Originally Posted by Marvin82

BBSE with 7-8-7-21 @1,65VDimm :up:
I neeed this Chips :D my can only 7-9-7-19 72 @ 1,647VDimm

Good DJ-F can do it

http://www.xtremesystems.org/forums/...&postcount=126

;)
10-09-2009, 01:15 PM
Marvin82

Thx

Show 100 post(s) from this thread on one page