Murdermod Zeus style

Printable View

Show 100 post(s) from this thread on one page

02-17-2009, 05:41 AM
alpha1ma

awsome..rads..
02-17-2009, 10:13 AM
N19h7m4r3

Quote:

Originally Posted by exemay

this build is looking VERY nice, kinda makes me wish i was doing my build in a tj07 :p: the radiators look very nice indeed, i think i might spray mine in the same way

any 1 got any idea where to get a hammond box in the uk??

very nice build, cant wait to see more!

exe!

Maplin's should have them.
02-17-2009, 10:16 AM
exemay

thanks, i found them on maplins, orderd 6 of them, thanks!! cant wait to put my build together!
02-17-2009, 10:20 AM
N19h7m4r3

Enjoy them m8, they're amazingly usefull :)
02-18-2009, 04:51 AM
Zeus

Update!

Got some good news and some bad news.

Got the PSU in today and what a handsome bastard it is.

http://img.photobucket.com/albums/v6...d/IMG_5628.jpg

http://img.photobucket.com/albums/v6...d/IMG_5629.jpg

http://img.photobucket.com/albums/v6...d/IMG_5630.jpg

The only downside is that it was DOA! :mad: :( It makes a strange clicking sound, the psu fan doesn't even start and it supplies only 9V for 12V and 3.25V for 5V. :( RMA time and it does postpone my build even more.

I started leaktesting the bottompart before closing things up and it was all watertight! :) :)

http://img.photobucket.com/albums/v6...d/IMG_5636.jpg

Orb watchers sit tight, here's two thermochills in SLI!

http://img.photobucket.com/albums/v6...d/IMG_5623.jpg

crowded house :)

http://img.photobucket.com/albums/v6...d/IMG_5634.jpg

http://img.photobucket.com/albums/v6...d/IMG_5635.jpg

http://img.photobucket.com/albums/v6...d/IMG_5644.jpg

Shiny huh?

http://img.photobucket.com/albums/v6...d/IMG_5645.jpg

http://img.photobucket.com/albums/v6...d/IMG_5647.jpg

Gonna put the fans on the rads now and stick the rads to the boxes.

Thanks for watching. ;)
02-18-2009, 07:27 AM
Zeus

Quote:

Originally Posted by Zeus

Gonna put the fans on the rads now and stick the rads to the boxes.

Done:

http://img.photobucket.com/albums/v6...d/IMG_5654.jpg

:cool:
02-18-2009, 07:44 AM
BlueAqua

That looks really clean Zeus. Nice work.
02-18-2009, 07:54 AM
theseeker

Sorry to hear about your PSU, but your work is top notch! That is going to be a heavy rig.:eek:
02-18-2009, 07:55 AM
Oli4v

very clean man and nice sleevingjob ;) :up:
02-18-2009, 08:42 AM
dualbrain

Wow - impressive Radiator-Setup! Looks very good and technically well executed! The lower section is already close to perfection from design-perspective (well sleeved too!). Sry for your PSU though.
02-18-2009, 08:48 AM
SNiiPE_DoGG

looks hot Zeus :)

just to clarify, you are running the water through the 2fan then the 3-fan correct?
02-18-2009, 09:06 AM
Zeus

Quote:

Originally Posted by BlueAqua

That looks really clean Zeus. Nice work.

Thanks BA, i hope my work can get somewhere close to yours but that will be hard work.

Quote:

Originally Posted by theseeker

Sorry to hear about your PSU, but your work is top notch! That is going to be a heavy rig.:eek:

Thanks, yes, it's heavy alraedy, lol.

Quote:

Originally Posted by Oli4v

very clean man and nice sleevingjob ;) :up:

Thanks man.

Quote:

Originally Posted by dualbrain

Wow - impressive Radiator-Setup! Looks very good and technically well executed! The lower section is already close to perfection from design-perspective (well sleeved too!). Sry for your PSU though.

Thanks, it means a lot coming from you. The PSU is a real bummer, to make matters worse, i bought it in Germany so i'm gonna have to send it back to Germany too. :( Bad luck is my middle name you know.

Quote:

Originally Posted by SNiiPE_DoGG

looks hot Zeus :)

just to clarify, you are running the water through the 2fan then the 3-fan correct?

Thanks Snipe. Actually it runs from the pump into the PA120.3 and through the SLI connection into the PA120.2. ;)
02-18-2009, 09:09 AM
SNiiPE_DoGG

Quote:

Originally Posted by Zeus

Thanks Snipe. Actually it runs from the pump into the PA120.3 and through the SLI connection into the PA120.2. ;)

you should reverse it to achieve the highest air-water delta at each point in the radiators, here's a diagram to explain why. (let me know if you need any clarification)

http://img524.imageshack.us/img524/8517/mcr320xn8.png
02-18-2009, 09:33 AM
Zeus

I think you're onto something! I'll check if i can reverse the hoses with it still looking good. Thanks for the tip.
02-18-2009, 10:23 AM
Darkninja462

Sorry Bout your PSU mate, I'm loving the build going to follow it to the end. :)

This is tracking back a bit but, How did you drill the 24pin and 8pin power supply holes in the motherboard tray ? some advice doing it would be very useful as I'm fed up of seeing them hanging there lo.

Ninja
02-18-2009, 10:28 AM
dualbrain

Where did you get the PSU? I just want to avoid to get yours :D
02-18-2009, 10:33 AM
exemay

Your Build is looking amazing, keep the work up!! i cant wait to see the final product

Question to Snipe DoGG

Quote:

Originally Posted by SNiiPE_DoGG

you should reverse it to achieve the highest air-water delta at each point in the radiators, here's a diagram to explain why. (let me know if you need any clarification)

http://img524.imageshack.us/img524/8517/mcr320xn8.png

If your setting up the radiators with 6 fans, where should they go?? either side? all 6 in the middle of the radaitors??? or 3 in the middle and 3 on the outside?
02-18-2009, 11:25 AM
SNiiPE_DoGG

I would do 3 in pull and 3 in the middle in a 6 fan config :) IIRC putting fans directly next to each other isn't really a good idea unless they are counter rotating.
02-18-2009, 11:36 AM
exemay

i didnt think sandwiching fans was a good idea... its a real shame that most cases dont have the room for a decent thick radiator like the thermochills or feser with room for 3 rows of fans........how effective is it if you have fans either side of the rad's??
02-18-2009, 11:39 AM
SNiiPE_DoGG

My system works great with just one set of 3 sanaces in the middle and 25mm spacer housings on the push side of the fan. I dont think you need as many fans as you are thinking of using

if you see in my worklog my load temps are sub 50C with my proc running 1.408v @ 4230mhz
02-18-2009, 12:13 PM
Zeus

Quote:

Originally Posted by Darkninja462

Sorry Bout your PSU mate, I'm loving the build going to follow it to the end. :)

This is tracking back a bit but, How did you drill the 24pin and 8pin power supply holes in the motherboard tray ? some advice doing it would be very useful as I'm fed up of seeing them hanging there lo.

Ninja

I just drilled holes with a stepped drill and used a dremel to cut out the metal in between the holes.

Quote:

Originally Posted by dualbrain

Where did you get the PSU? I just want to avoid to get yours :D

www.preiscompany.de ;)

Quote:

Originally Posted by exemay

Your Build is looking amazing, keep the work up!! i cant wait to see the final product

Neither can i but it's postponed by the darn PSU now. Oh well...
02-18-2009, 12:24 PM
Darkninja462

Quote:

Originally Posted by Zeus

I just drilled holes with a stepped drill and used a dremel to cut out the metal in between the holes.

Is there anyway to do it while the tray is still in case ?
02-18-2009, 12:35 PM
Zeus

Well, that would make it very hard. I wouldn´t recommend as the shavings will end up all over your precious hardware--not good.
02-18-2009, 12:40 PM
Darkninja462

Quote:

Originally Posted by Zeus

Well, that would make it very hard. I wouldn´t recommend as the shavings will end up all over your precious hardware--not good.

Ahh very true will proberly take everything out then.

Thanks for the advice much appreciated.

Ninja
02-18-2009, 02:16 PM
N19h7m4r3

Very nice looking.

I love the dual rad setup, for a moment it looked liked the fans wouldn't fit at all :)

Pity about the PSU

I usually order from http://www.kmelektronik.de/ and they've been great to me.

Show 100 post(s) from this thread on one page