[Testing] Core I7 920 (watercooled) & Gigabyte UD5 X58

Printable View

Show 100 post(s) from this thread on one page

12-06-2008, 08:58 AM
mascaras

update

Core i7 920 @ 3.9Ghz
BCLK : 195
Multi : x20
ddr3-1560Mhz 9-9-9-24
1.28v Full

(prime95@Blend)

http://img152.imageshack.us/img152/1038/390015be9.jpg

:up:
12-06-2008, 09:00 AM
Splave

what temps you hitting?
12-06-2008, 09:20 AM
mascaras

Quote:

Originally Posted by Bobbylite

what temps you hitting?

Hi

The Higher Core around 66º

:up:

EDIT:

Just installed new F4K bios

3800Mhz @ 1.20v

BCLK 200
Multi x19
Uncore x16
memory multi x8
QPI/VTT : 1.235v
Vcore : 1.20v LOAD

http://img87.imageshack.us/img87/9391/3800120vev4.jpg

and 220BCLK

http://img184.imageshack.us/img184/5952/220poicwa3.jpg

validation

http://img381.imageshack.us/img381/7872/220tj8.jpg

http://valid.canardpc.com/show_oc.php?id=457815

Very Good Bios :up:

regards
12-06-2008, 06:29 PM
ShoNuff

Quote:

Originally Posted by mascaras

update

Core i7 920 @ 3.9Ghz
BCLK : 195
Multi : x20
ddr3-1560Mhz 9-9-9-24
1.28v Full

cut...

Nice clocks Brother! Keep pushing it. :up: I was able to lower my vCore and QPI/VTT a bit as well with the F4J bios (EX58-Ext).

Thanks for sharing the info.
12-06-2008, 07:14 PM
jcool

Looks like I have to try a new bios on my extreme as well, since the 8x ram mult isn't working at a BCLK of 200 with either of my 6GB kits.
12-06-2008, 10:40 PM
ShoNuff

Quote:

Originally Posted by jcool

Looks like I have to try a new bios on my extreme as well, since the 8x ram mult isn't working at a BCLK of 200 with either of my 6GB kits.

I've had success with 6GB of Corsair Ram with the F3 and the F4J bios' (what is the plural spelling of the bios?) with a BClk of 200. My settings are very similar to what was shared in this thread. I'm sure you have probably figured it out by now. If not, I'd be more than happy to post my settings.
12-07-2008, 05:24 AM
jcool

Nothing to "figure out" really, BCLK of 200 + ram mult of 8 = no post with any of the 6GB kits I tried, regardless of other settings ;)
Need to try new bios.
12-07-2008, 08:48 AM
mascaras

Update

Bios F4K
191x21
QPi/VTT : 1.235v
Uncore : x16
Ram : x8
Vcore : 1.264v Load
PLL : 1.80v
DDR3-1530mhz 8-8-8-24@ 1T

http://img255.imageshack.us/img255/3271/4ghz126vij4.jpg

regards
12-15-2008, 11:53 AM
mascaras

Hi again guys

~1 Hour prime95 @ 4Ghz (bios F4k)

191x21
QPi : x36
Uncore : x16
Ram : x8
Vcore : 1.264v/1.28v Load
QPi/VTT : 1.235v
PLL : 1.80v
Vdim : 1.60v

http://img88.imageshack.us/img88/361...estavelga0.jpg

:up:
12-17-2008, 05:45 PM
mimeo

Hi mascaras,

can you help me? so here is the setup
200x 21 after turbo mode is at 4.2 ghz
i have follow ur setup or try various setting, and bioz is version f3
but after i used the prime95, the speed will go down to 4 ghz.
at coretemp: it sees as 3.8ghz and tdp: just stop 130 watt, when it's full loaded. (147.3 watts idle)

is it my chip?

cheers
12-17-2008, 06:19 PM
mascaras

Quote:

Originally Posted by mimeo

Hi mascaras,

can you help me? so here is the setup
200x 21 after turbo mode is at 4.2 ghz
i have follow ur setup or try various setting, and bioz is version f3
but after i used the prime95, the speed will go down to 4 ghz.
at coretemp: it sees as 3.8ghz and tdp: just stop 130 watt, when it's full loaded. (147.3 watts idle)

is it my chip?

cheers

hi

no , nothing wrong with your chip

only the F4 Bioses keep the Multi x21 always enable with turbo mode (The F3 bios only use multi x21 in single app)

If you want to use multi x21 @ Turbo you need to update the bios !

regards
12-17-2008, 07:06 PM
mimeo

oh thx alot mascaras =). i thought my cpu is defective.
12-25-2008, 03:31 PM
mascaras

Hi guys

tests with F4R bios

Windows Vista 64bit
Core i7 920 @ 3800Mhz @ 1.20v
Corsair XMS3 3GB DDR3-1600Mhz @ 7-7-7-21 @ 1.62v

Everest

http://img244.imageshack.us/img244/2...estnovoyr7.jpg

Cinebench

http://img78.imageshack.us/img78/2663/cineoo7.jpg

22246

-----------------------

And my 24/7 Config

Idle @ 2280Mhz @ 1.04v (Speedstep & C1E)

http://img300.imageshack.us/img300/3564/idleev9.jpg

Load @ 3600Mhz @ 1.12v

http://img156.imageshack.us/img156/3005/3600112viw7.jpg

Regards

..
12-27-2008, 05:19 AM
dan7777

i want a i7 waiting for price drop on MB ETC
12-28-2008, 10:59 AM
Ziwro

" Note: You should use the White Ram Slots !!! "

Why we should use White Slots ?
12-28-2008, 11:14 AM
mascaras

Quote:

Originally Posted by Ziwro

" Note: You should use the White Ram Slots !!! "

Why we should use White Slots ?

hi

White Slots >> Triple Channel

its on Manual Board (page 17 ) >> you must populate the white slots (DDR3_1, DDR3_3, DDR3_5) at first if you want to run triple channel.

first time i used the Blue slots and the system dont even boot !

regards
12-28-2008, 11:24 AM
eva2000

Yup :)

http://nx.i4memory.com/x58manuals/ex...figuration.png
12-28-2008, 11:51 AM
Ziwro

Thanks, Another question :)

I want buy this Mobo for daily usage, is it good ? I see a lot of problem of this mobo :S Strange Noise Problem ( When disable CE in bios, its fine ), Lan Ports Disable Automatically, mobo doesnt recognize 6gb ram Easytune and other programs doesnt run etc. ? Do you have any problem ?

Sorry My Bad English ;)
12-28-2008, 04:58 PM
Hornet331

Quote:

Originally Posted by Ziwro

Strange Noise Problem ( When disable CE in bios, its fine )

Depends on the board you get, its usually a coil that beginns to vibrate and makes a high pitched noise. If its to loud just rma it. Theres a risk on every board that it will make noises. But most of the boards wont make a noise.

Quote:

Originally Posted by Ziwro

Lan Ports Disable Automatically,

God damit people should read the damn manual befor playing around... :rolleyes:
Its not a problem, its a feature (which you can disable and should be disabled by default). Its called "Green LAN"

Quote:

Originally Posted by Ziwro

mobo doesnt recognize 6gb ram

Theres a chance for every board to have certain incompatibilities with certain rams. Just buy some that are known to work with that board. Also use the white slots. :yepp:

Quote:

Originally Posted by Ziwro

Easytune and other programs doesnt run

that has nothing to do with the board, but more with the thing that gb sucks at making programs that work under vista 64bit. :p:
12-29-2008, 12:15 PM
mascaras

yep , the only "problem" i have is the Easytune error with Vista 64bit , all the rest work just fine !(no problems so far since 25th november)

best regards
12-30-2008, 02:20 PM
Computerville

Hey, I will get my i7 setup in a few days. Just wondering some stuff:

1. Is the Gigabyte EX58-Extreme a good choice vs. Asus P6T Deluxe?
Because I happen´t to order the Gigabyte and I hope I don´t gonna miss anything...

2. Can I move a already working RAID 0 array (2x250GB) who was made on a Asus Crosshair to a NEW motherboard without to lose any data?

3. Do you think the 21x enable of multipel are going to be enable to my a good choice vs. Asus P6T Deluxe? Because I happen´t to order the Gigabyte and I hope I don´t gonna miss anything...

4. Can I move a already working RAID 0 array (2x250GB) who was made on a Asus Crosshair to a NEW motherboard without to lose any data?

5. Do you think the 21x enable of multipel are going to be enable to my EX58-Extreme?

6. Is it true that the turbo thing is only the speed of ONE core?
So it´s like, Core 1 = 4200MHz, Core 2 = 4000. Core 3 = 4000, ex.
01-03-2009, 03:03 PM
MrHydes

Exelent work Mascaras, haven't you tried 210BLCK x21 vid under 1.44v with a 3 sticks

at 1600 Cas7 1T, because i belive you have room for mutch higher bandwidth

i would like to see you hitting 20k 21K read test at least.

keep the good work up :up:

cheers mate

Show 100 post(s) from this thread on one page