E8400 (New Batch) 5.1G Enter Window at Low Volt 1.39V

Can you test a quick 9x500 Orthos run? To see how much vcore is required? You're a lucky guy!

very nice !!!

i would drop that bad boy on ebay and let the bidding begin .

Quote:

---

Originally Posted by bigwill68

Hey erickwok good job on the Oc brother..I just pickup a E8400 EO Q832A
for $149.99 in the states.My question now is which numbers matter the most
the first 3 or the last 3 on the cpu to tell if you got a good chip to Oc with
Also see you got the BioStar TPower45 chip.. that I got on backorder at my
local Micro Center store here in the states good match..Ic they got the (B)
over there who got the (C):rofl: now..I gotta find the Memory your running
again great job:up: and the best of luck on your Rig:yepp:

---

Hi bigwill68

Awaiting your report on Q832A:up:

Quote:

---

Originally Posted by George_o/c

erickwok, man with your cpu @ 5183, a DFi with pre-45nm bios and some nice 1M tweaking, one could pull off like 8.74x seconds :yepp:
Sick cpu ! :up:, do you want to trade with my E4300 ? :p: :D 3800MHz stable on air, 3950MHz max on air, 4464MHz max SPi 1M on dry ice ... :D

---

I prefer to trade with a good E8600 Q822A4xx:yepp:

Quote:

---

Originally Posted by RPGWiZaRD

Can you test a quick 9x500 Orthos run? To see how much vcore is required? You're a lucky guy!

---

yes I will
post it for you :yepp:

Quote:

---

Originally Posted by heydo6

very nice !!!

i would drop that bad boy on ebay and let the bidding begin .

---

too many people got E8400
this chip not so special :D

i demand you to give me your golden E8400...RESISTANCE IS FUTILE.:D

Just insane chip. I`d like to have the same one...

Quote:

---

Originally Posted by erickwok

Hi bigwill68

Awaiting your report on Q832A:up:

---

My report will come sometime in December When..I get the rest on my stuff:yepp: Gotta save some Cash

nice chip vould like to see it on sub zero:)

B + 1.2000vid = 5+ghz

not surprising at all :)

congratz on acquiring great chip :up:

Well done :up:

What fan is that attached to your heatsink?

Any further results?

A few results from my E0

Mobo: Biostar TPower I45
Ram: 2x1gb d9gmh
Psu: Silverstone Decathlon 1200w
Vga: 8600gt
Cooling: Aircooling - Thermalright Ultra 120

Q832A batch code
32pi TEST
http://cfs15.tistory.com/original/18.../4927fbf80cb41
http://cfs15.tistory.com/original/25.../491f7bc3e1204
cpu E8400
M/B DFI Lanparty UT P45 T2RS
RAM OCZ 7200 SLI 1x2
VGA x700
POWER ZM 750-HP

Those new E0 are killing me , most people get 5 Ghz with 1.4 or even lower under SS , I start to hate my chip (C0)which require 1.55v to be stable , u got a golden E8400

I wonder what my new e8400 Q836A368 can do... ;)

:eek:omg VERY NICE CPU

Q829A502...
http://photo.mofang.com.cn/photo/411...3911170556.JPG

Quote:

---

Originally Posted by erickwok

Hi bigwill68

Awaiting your report on Q832A:up:

---

Had it a 4.5 was'nt stable so gonna keep
it at 4.0 with low volts for right now
idling temps at 32c great:yepp:
I know it will do more not gonna
push just yet easy into it...down the line



screen shot of orthos

Sandra Test
http://img386.imageshack.us/img386/5...dratestxc8.jpg

Temps only got up to 53c under stress that's great in my book:)
next build will be water cooled for sure haf932

Oop's I almost forgot this test 2:)
http://img296.imageshack.us/img296/9...urntestps0.jpg

Amazing...wish I could get one like that too...:p:

Just like to know more about the stability of the gold chip at 5GHz. Can this chip pass Prime 95 on small FFT, for at least 12 hours, erickwok?

Thank you very much for sharing it with us :clap:

Quote:

---

Originally Posted by PhantomBeast

Amazing...wish I could get one like that too...:p:

Just like to know more about the stability of the gold chip at 5GHz. Can this chip pass Prime 95 on small FFT, for at least 12 hours, erickwok?

Thank you very much for sharing it with us :clap:

---

I am now waiting for a new Copper Thermalright Heatsink to break my air cool record.;)

http://www.thermalright.com/new_a_pa..._t_copper.html

Quote:

---

Originally Posted by erickwok

I am now waiting for a new Copper Thermalright Heatsink to break my air cool record.;)

http://www.thermalright.com/new_a_pa..._t_copper.html

---

Nice, but did you check the weight...... ouch!!!

Quote:

---

Originally Posted by d975xbx

Q829A502...
http://photo.mofang.com.cn/photo/411...3911170556.JPG

---

no one noticed the foxconn avenger mobo ? :D

damn @ 1.125vid

To the OP: I realize XS places an odd fascination with SuperPI, but is this overclock OCCT stable? 3D Stable (e.g. passes a couple hours of regular gaming use)?