DFI Lanparty UT P45-T2RS Banter starts here!!!

Printable View

Show 100 post(s) from this thread on one page

11-04-2008, 09:22 AM
BiTsCrEaM

Copy them into the ITE/SG folder.
11-04-2008, 09:28 AM
RNeon

yes i´ve done it from the first time and it looks like this.

http://www.abload.de/thumb/smartohhq.jpg

it is not complete. wich version i need from smart guardian? and how can i input the coretemp in it?
11-04-2008, 09:34 AM
C-N

Quote:

Originally Posted by RNeon

there are 3 files alle the three i have to copy it in the sm folder? and wich version do you mean ? and how do coretemp run over smart guardian. im sorry io dont understand.

Quote:

Originally Posted by RNeon

PLease help me i don´t understand how did you made it. i have copied the bachground and the smart.ini but i have a too small window and the coretemp window is not included. wich version of smart guardian i have to use?

No just the background & the .ini file the other image is just to show you it was made the same size as core temp. Just run SG & put it next to SG.

What OS are you using I have tested it with XP 32bit SP2 & 3 AND Vista 32bit & SP1 & not had any problems.
11-04-2008, 09:38 AM
RNeon

im running vista 64bit but how can i make the window normal? you can see in the pic that it is not complete on the left side. In the SG folder there are 3 backgorund files at default should i let it so?
11-04-2008, 09:55 AM
RNeon

and wich rams 2x2gb do you prefer fpr this board and good overclocking? need rams that make 1200mhz stable
11-04-2008, 10:03 AM
RNeon

ok i solve the problem by myself. you need the SG Version from the DK P45 T2RS and not for the new. I installed it and it runs. but please answer my question about the rams. thank you:)
11-04-2008, 10:44 AM
C-N

Quote:

Originally Posted by RNeon

ok i solve the problem by myself. you need the SG Version from the DK P45 T2RS and not for the new. I installed it and it runs. but please answer my question about the rams. thank you:)

Oh I thought they were the same version but I'm glad you got it working :up:

Sorry I only have 2 OCZ Reaper 4GB sets one PC2-6400 that will do 1130 ish mhz in other boards & one PC2-8000 kit. I'm not sure how far the 8000 kit will go as I've never realy benched them all I do know is I don't have a 4GB kit that will do 1200mhz. Have you checked the memory list on the 1st post or the DFI site, perhaps that will help.
11-04-2008, 12:23 PM
MTP04

Bought this board earlier today, should arrive before the weekend.:D

I'll share some results once I have some.
11-04-2008, 03:14 PM
politenessman

i am unable to get either of my 2gb kits of ocz ddr2 1150 to post in this board in any way. single channel, dual channel, single stick, any dimm, gets me c1 error. my 2gb ddr2 1066 tracer runs fine, as does my 2gb adata 6400 and old g.skill hz. 4gb g.skill 1066 pi coming tomorrow with e0 q9550.
11-04-2008, 03:58 PM
kitfit1

Quote:

Originally Posted by politenessman

i am unable to get either of my 2gb kits of ocz ddr2 1150 to post in this board in any way. single channel, dual channel, single stick, any dimm, gets me c1 error. my 2gb ddr2 1066 tracer runs fine, as does my 2gb adata 6400 and old g.skill hz. 4gb g.skill 1066 pi coming tomorrow with e0 q9550.

I find that very odd. I have 4x1gb OCZ PC9600 Flex's in mine and they boot up fine, even from a straight Cmos clear. I would of thought 4 sticks are less likely to boot than anything.
11-04-2008, 04:34 PM
emoners

@C-N or Clunk: have you guys tried slapping a quad on this board?
11-04-2008, 04:59 PM
politenessman

i will have q9550 e0 in tomorrow (wed) and post results.
11-04-2008, 11:50 PM
C-N

Quote:

Originally Posted by emoners

@C-N or Clunk: have you guys tried slapping a quad on this board?

Sorry I haven't, I don't own one & its driving me nuts. I guess I'll will have to sell some stuff off & get one.

Quote:

Originally Posted by politenessman

i will have q9550 e0 in tomorrow (wed) and post results.

I Look forward to your results :up:
11-05-2008, 11:39 AM
C-N

I dusted of my old SS last night & gave her a bit more stick :D

560fsb is where all the action is on my board ;)

http://i106.photobucket.com/albums/m...ncy5625X95.jpg
11-05-2008, 03:49 PM
zsamz_

1 Attachment(s)

Quote:

Originally Posted by C-N

I dusted of my old SS last night & gave her a bit more stick :D

560fsb is where all the action is on my board ;)

http://i106.photobucket.com/albums/m...ncy5625X95.jpg

lookin good
this is best i did with ut p35
11-05-2008, 04:05 PM
C-N

Its pretty close, this is the closest bench I have to 565 x 8.5

http://i106.photobucket.com/albums/m...che/560x85.jpg

I also pulled a couple more fsb out, still a couple off my P35 but an improvement.

http://i106.photobucket.com/albums/m.../MaxFSB625.jpg
11-05-2008, 04:05 PM
SNiiPE_DoGG

Quote:

Originally Posted by zsamz_

lookin good
this is best i did with ut p35

his cache numbers are quite a bit higher than yours... is this a result of the p45?
11-05-2008, 04:09 PM
C-N

Quote:

Originally Posted by SNiiPE_DoGG

his cache numbers are quite a bit higher than yours... is this a result of the p45?

Core speed would be my guess, look at my closer nearly like for like bench.
11-05-2008, 04:11 PM
SNiiPE_DoGG

Quote:

Originally Posted by C-N

Core speed would be my guess, look at my closer nearly like for like bench.

:doh: lol I forgot to look at that :rofl::rofl::rofl::ROTF:
11-05-2008, 04:32 PM
zsamz_

Quote:

Originally Posted by SNiiPE_DoGG

his cache numbers are quite a bit higher than yours... is this a result of the p45?

i'm on air i cant go that high on cpu:rofl:
11-05-2008, 05:12 PM
namegt

nice "C-N"
DFI UT P45 T2RS
your settings for 600fsb?
11-05-2008, 05:35 PM
namegt

DFI Lanparty UT P45-T2RS 10/28 BIOS

http://namegt.tistory.com/attachment...13e76597BU.zip
11-05-2008, 05:38 PM
namegt

http://cfs12.tistory.com/image/18/ti.../491039c495615
http://cfs15.tistory.com/original/26.../49106a2d573ba
DFI UT P45 T2RS my first post

Unstable and difficult to raise the BIOS FSB
11-05-2008, 06:28 PM
BlazingArrow

OMG! That's not a glitch, it's running @ 1.2 vCore????
11-05-2008, 11:45 PM
politenessman

got my q9550 e0 today and stoked it up in the ut p45. absolute nightmare. unstable even at default, random power downs, bsod, black screens. checked cpu in another mainboard and it (q9550) is fine. checked my e8500 e0 in the p45 and it (lp ut p45) was fine. looks like these boards may ( or my board, at least) have issues with 45nm quads, or 45nm quad e0. its in the machine now and this is the third time i am trying to post this, it keeps on bsod'ing or random warm restarting. i ahve been over it and over it since 4pm. its about 2:40am now.
tried 4 types of ram, another psu, still ng. anybody else have a 45nm quad on this board?

Show 100 post(s) from this thread on one page