EP45-UD3P Benches 3D at 670mhz+ FSB

Printable View

Show 100 post(s) from this thread on one page

10-10-2008, 10:41 AM
Harshal

45K straight... You on a roll Thomas!! :up:
Awaiting full fledged run with a killer R8600 chip :D
10-10-2008, 11:06 AM
hicookie

Quote:

Originally Posted by harshal

45K straight... You on a roll Thomas!! :up:
Awaiting full fledged run with a killer R8600 chip :D

that's what i said, i don't have E8600 right now, wait you guys to push
ur own E8600 to the limits, :)

thoms and benny, nice 1m performance run :)
10-10-2008, 11:10 AM
Slovnaft

Quote:

Originally Posted by Pt1t

1min OCCT , my cpu doesnt like more ^^ , cpu temp stopped occt because >70°c under intel stock cooler.

Is that with LLC? even sheit analogue phases look great with llc.
10-10-2008, 11:23 AM
hicookie

Quote:

Originally Posted by Slovnaft

Is that with LLC? even sheit analogue phases look great with llc.

analogue performance well
just for all mobo makers, "sometimes" they need to follow intel's vdrooping
guide line, UD3 line already add vdrooping calibration ,now u can be more flexiable with overclocking or follow intel's vdrooping guide line.:)
10-10-2008, 11:45 AM
Slovnaft

Quote:

Originally Posted by hicookie

analogue performance well
just for all mobo makers, "sometimes" they need to follow intel's vdrooping
guide line, UD3 line already add vdrooping calibration ,now u can be more flexiable with overclocking or follow intel's vdrooping guide line.:)

I'm not sure what you mean there, but what i wanted to see was the native vdroop of this board without LLC, because even a board with poor power distro design can look stiff with LLC enabled.
10-10-2008, 11:56 AM
hicookie

Quote:

Originally Posted by Slovnaft

I'm not sure what you mean there, but what i wanted to see was the native vdroop of this board without LLC, because even a board with poor power distro design can look stiff with LLC enabled.

if u consider the native loadline, suggest u can test with different mobo and
same psu, btw, even the native loadine just decided by those engineers choose what resistors. if u worry about the curve, even with LLC, u can see
the picture from thomas, the curve is looking good.
10-10-2008, 05:30 PM
eiceman

any test about Quadcore? and more picture about bios ?
10-10-2008, 07:04 PM
Slovnaft

Quote:

Originally Posted by hicookie

if u consider the native loadline, suggest u can test with different mobo and
same psu, btw, even the native loadine just decided by those engineers choose what resistors. if u worry about the curve, even with LLC, u can see
the picture from thomas, the curve is looking good.

ohh hohoh, native LLC ok gotcha. thanks.
10-10-2008, 10:39 PM
bigslappy

WoW ...that's a Sweet MoBo !
10-11-2008, 04:23 AM
RPGWiZaRD

Quote:

Originally Posted by Pt1t

Very fast super pi 1M @ 4ghz :D

WTF, 11,296s with PL9? This board is really efficient, among the fastest PI times and prolly fastest for Gigabyte at this config I've seen for 500x8 and DDR2-1200. I don't even get that with PL8 on my P35-DS4. :rolleyes:

If I upgrade mobo Gigabyte it is, might wait and see if they release some DS4 variant with 2oz.
10-11-2008, 05:56 AM
Pt1t

Quote:

Originally Posted by Slovnaft

ohh hohoh, native LLC ok gotcha. thanks.

~1hour OCCT stability test. Vcore no drop :D
http://www.pt1t.eu/public/EP45-UD3P/OCCT_4ghz_vcore.PNG

http://www.pt1t.eu/public/EP45-UD3P/OCCT_4ghz_temp.PNG
10-11-2008, 06:06 AM
dinos22

try a quad with 1.5vcore and high MHz :D

but yeah i think this board will handle anything you throw at it
hehehe

wish mine could be here so that i can use this left over LN2 hheheheh
10-11-2008, 06:09 AM
Pt1t

Quote:

Originally Posted by dinos22

try a quad with 1.5vcore and high MHz :D

but yeah i think this board will handle anything you throw at it
hehehe

wish mine could be here so that i can use this left over LN2 hheheheh

:lol: , I Cant put 1.5v to my E8600 in air. It needs only 1.26v for 4.5ghz and 80° full loaded. I will try a QX.
10-11-2008, 06:10 AM
M3kk

And what is the vcore @ idle? :D
10-11-2008, 06:16 AM
Pt1t

Quote:

Originally Posted by M3kk

And what is the vcore @ idle? :D

Same ,with occt 1h test first and last minutes are idle.

I added temperature graph.
10-11-2008, 06:18 AM
road-runner

I ordered one yesterday, will see how it does with a quad... :D
10-11-2008, 06:48 AM
M3kk

Quote:

Originally Posted by Pt1t

Same ,with occt 1h test first and last minutes are idle.

I added temperature graph.

And the same value ( set ) in bios too? :P
10-11-2008, 06:51 AM
Pt1t

Quote:

Originally Posted by M3kk

And the same value ( set ) in bios too? :P

no , set 1.2v for 1.17v , 1.17v real and also 1.17v under cpuz. But if you know that bios set = real vcore -0.03v it isnt a problem.
10-11-2008, 07:50 AM
RPGWiZaRD

What voltage regulation setup are these boards using, is it 6 power phase perhaps? 8 is the lowest I want that IMO ensures stable OC.

EDIT: Looks like 6-phase. Hmm, might wait for some "DS4" variant.
10-11-2008, 09:11 AM
hicookie

Quote:

Originally Posted by RPGWiZaRD

What voltage regulation setup are these boards using, is it 6 power phase perhaps? 8 is the lowest I want that IMO ensures stable OC.

EDIT: Looks like 6-phase. Hmm, might wait for some "DS4" variant.

where u hear that? , cal 6 phases, 30a per phase then u have 180a for processor,
isn't that enough for all model of processor?:)
10-12-2008, 04:15 AM
Pt1t

quick test of vcore stability with and quad core.

http://www.pt1t.eu/public/EP45-UD3P/OCCT_QX_vcore.PNG

http://www.pt1t.eu/public/EP45-UD3P/OCCT_QX_temp.PNG
10-12-2008, 12:11 PM
Solid Snake

exellent oc !!!! :shocked::shocked:

i have my new EP45 UD3P ;)

loading.....:up:
10-12-2008, 12:27 PM
SimpleTECH

Looks like a board to get! Just wish I had the money at the time when Newegg was offering free shipping on this board. Until next time. :yepp:
10-12-2008, 12:40 PM
Flinch

Quote:

Originally Posted by Solid Snake

exellent oc !!!! :shocked::shocked:

i have my new EP45 UD3P ;)

loading.....:up:

I placed my order for this Saturday, so I'm eagerly awaiting quad results.
10-12-2008, 12:47 PM
Exedy

Pt1t...500FSB with no tweaking in voltages right?

And also the only difference between UD3P and R is the additional PCIex16/x8 ?

Nice results

Show 100 post(s) from this thread on one page