Printable View
i had to test this method out myself and i got to say that its rocks.. its easy to ably and comes off without a trace ( usings tape to cover some places is essential though) anyways here are few pics of my Biostar Tpower ;)
http://i163.photobucket.com/albums/t...s/DSCN1330.jpg
http://i163.photobucket.com/albums/t...s/DSCN1334.jpg
Looks "okay" :p:, Solarfall!
We have seen better yet. *hehehe* (*ducks and runs*)
I didn't even use tape on the socket, I put the stuff even in the small gaps at the cpu-"holddown".
I peeled the whole rubber-iso off and everything was gone off the mobo.
So, on the socket I don't know if you need to use masking tape.
heheh i know its not really a "nice looking job" but it worked and that's the main thing :D the stuff i used didn't come off so easily like yoursQuote:
Originally Posted by Fr3akyPete
Here is my first "loc.o and Team Turkey insulation" for my first LN2 run on P5Q Deluxe :D
benching about 5 hours without any problems, itīs great :up:
http://s5b.directupload.net/images/081011/laslvulu.jpg
SOLD on this !
doing dice in about a week and this is going to be my setup
thanks for posting this before eye fingernaild polished mobo = pissed off ole lady
wasted 20 bucks in gas just trying to find more aremflex = pissed off me
this eraser stuff is everywhere in town here and allmost all the hardware stores eye been to dont even know what closed cell foam is !!
Dude, Home Depot doesn't even know what armaflex is...
ya shocked me too neither did lowel's thay didnt even have pipe wrap !
well lat night I erasered the hell outa my board, no dielectric grease or anything and then slapped about 2 hrs worth of -55c to it and wham! no condensation looks like this is the way for me :D still havin minor contact issues but nothing major.
That looks nice and neat.Quote:
Originally Posted by palee02
As long as stop the condensation doesnt really matter how it looks:p:
I am going to try this myself soon as well:up:
Btw , Dino bluetac was great arround the cpu when i used dice :up:
dude home depot sells armaflex tape for the cheapest ive seen by a lot:rolleyes:Quote:
Originally Posted by Slovnaft
Quote:
no grease under eraser, with grease, it becomes b.ulls.hit :eek:
backplate+regular neoprene+mobo+eraser+regular neoprene is a good way...
So can you put at least a little bit of DE grease inside the cpu socket just in case (for 24/7 ss setup that I wont be checking anytime soon)...
Sure, it prevents CPU and pins (just inside the cpu socket)Quote:
Originally Posted by Jor3lBR
On mobo surface, eraser and grease couldn't be together, no way!
Palee02: Good job, show us some pics on action! (both NB and CPU pots pls)
I canīt find any pics in action... I was doing bench and my friends were taking photos so I have only pics they sent me today, no more :(... there were more computers cooled by ln2
an older benching with my friend + dice + Commando :)
http://lh5.ggpht.com/Palee7/SNU95Orj...041_resize.JPG http://lh5.ggpht.com/Palee7/SNU-IYkK...054_resize.JPG
What kind of type can i use? if i don`t find neoprene type?Quote:
Originally Posted by loc.o
That type is paper tape?Quote:
Originally Posted by Solarfall
Can i use aislant type?mmm in spanish is cinta aisladora, we use to insolate electric wire......
i think you can use masking tape probably
BND mate any tape wil do, the one you have is fine. The neoprene are some pieces that i put behind the caps so i dont have to use the eraser on spots it wil be hard to clean:
http://img.photobucket.com/albums/v2...G_05-paint.jpg
Does anyone here know where I can pick up the kneaded eraser from in Australia?
I checked Lincraft (craft store) and they didnt have any. Does this look all right? http://cgi.ebay.com.au/NEW-Sanford-D...742.m153.l1262
Should do :) Think its the same TheGoat_Eater used, maybe ask him. Should be available closer to home though id guess :D
Ohhh ya.... neoprene is in the midle of solid capacitor and regulator of voltage right, yellow point that you show me rightQuote:
Originally Posted by loc.o
So i can use electrical aislant type.... or paper tape both is ok
Since i did not find Kneaded Rubber s-h-i-t i used some stuff that once was used at wooden windows glasses to prevent air/cold getting in the room . :D
http://forum.crazypc.ro/attachment.p...1&d=1223913923
after removal, is the art eraser stuff reusable for another run?
Yup. You can continue to use it so long as you don't get it dirty with stuff like metal shavings :D
Is it best to have the kneaded eraser approx the same height as the CPU?
Also, do you fill in the socket with anything or do you just put some tape on it and mold the eraser around it?
Thanks.
Thanks for posting. I am considering going DICE or LN2 later--in another thread I posted a CPU pot design. Anyways--I used to have some of this stuff. I think masking tape would be cheapest solution for barriers--so long as it doesn't have too much stick. Anyways--do you suggest layering or kneading together 2-4 packages of this stuff and rolling it flat? Anyways--is there any particular neoprene you need for the rest of the insulation? I think both can be had at just about any craft store, so just wondering.
Try HERE dudeQuote:
Originally Posted by s e r e n i t y