DFI Lanparty JR P45T2RS (56k warning)

Printable View

Show 100 post(s) from this thread on one page

11-13-2008, 03:56 PM
Cornelious0_0

Quote:

Originally Posted by Envy

awesome news "DFI x58 Core i7 mATX" :slobber: seems like DFI is the only company bringing mATX to X T R E M E, i wish ASUS Gigabyte and others will pick up the idea for some serious competition "where is the ROG mATX? :shrug:" do they think all gamers like 24 inches tall cases?. in my opinion DFI Lanparty JR P45T2RS is for now at the top of the list for Lanbox.

And that's what mine is. I'm working at designing a completely internal watercooling loop for the CPU using a 120.2 rad to fit in my mATX TJ08...and knowing that I could move to DFI's X58 mATX board and pickup a second GTX260 is amazing!!!
11-16-2008, 08:38 AM
Praz

LP JR P45-T2R, E8600, 575x7.5, 2x2GB Memory 1152MHz, Post 1 of 3

DFI LP JR P45-T2R, 10/30 BIOS
575x7.5, Memory 1152MHz
E8600
2x2GB OCZ PC2-9200 Flex II 1050MHz 5-5-5-18
SAPPHIRE 4870
OCZ Core SSD
Orange Slots Used For Memory

click for larger image
http://www.edgeofstability.com/image...ios/main_s.jpg http://www.edgeofstability.com/image...ios/volt_s.jpg

click for larger image
http://www.edgeofstability.com/image...os/dram1_s.jpg http://www.edgeofstability.com/image...os/dram2_s.jpg

click for larger image
http://www.edgeofstability.com/image...s/clock1_s.jpg http://www.edgeofstability.com/image...s/clock2_s.jpg

click for larger image
http://www.edgeofstability.com/image...os/phase_s.jpg http://www.edgeofstability.com/image.../feature_s.jpg

Code:

CPU Feature Page Thermal Management Control................Enabled PPM(EIST) Mode............................Enabled Limit CPUID MaxVal........................Disabled CIE Function..............................Auto Execute Disable Bit.......................Enabled Virtualization Technology.................Enabled Core Multi-Processing.....................Enabled Main BIOS Page Exist Setup Shutdown......................Mode 2 Shutdown after AC loss....................Enabled AC Shutdown free..........................Enabled O.C. Fail Retry Counter...................1 O.C. Fail CMOS Reload.....................Disabled CPU Clock Ratio........................... 7.5x CPU N/2 Ratio.............................Enabled CPU Clock.................................575 MHz Boot Up Clock.............................Auto CPU Clock Amplitude....................... 800mV CPU Clock0 Skew........................... 200ps CPU Clock0 Skew........................... 0ps DRAM Speed................................333/667 PCIE Clock................................100MHz CPU Spread Spectrum.......................Disabled PCIE Spread Spectrum......................Disabled Voltage Setting Page CPU VID Special Add.......................+137.5mV DRAM Voltage Control......................2.001V SB Core/CPU PLL Voltage...................1.55V NB Core Voltage...........................1.4075 CPU VTT Voltage...........................1.26V VCore Droop Control.......................Enabled Clockgen Voltage Control..................3.45V CPU GTL 0/2 REF Volt......................0.67X CPU GTL 1/3 REF Volt......................0.67X North Bridge GTL REF Volt ................0.61X FSB Vref.................................. 2A DRAM Timing Page Enhance Data Transmitting.................Fast Enhance Addressing........................Fast T2 Dispatch...............................Auto Clock Setting Fine Delay..................Listed Below Flex Memory Mode..........................Auto CAS Latency Time (tCL)....................5 RAS# to CAS# Delay (tRCD).................5 RAS# Precharge (tRP)......................Auto Precharge Delay (tRAS)....................15 All Precharge to Act......................8 REF to ACT Delay (tRFC)...................60 Performance Level.........................10 Read Delay Phase Adjust...................Listed Below Write to PRE Delay (tWR)..................14 Rank Write to Read (tWTR).................11 ACT to ACT Delay (tRRD)...................3 Read to Write Delay (tRDWR)...............8 Ranks Write to Write (tWRWR)..............Auto Ranks Write to Read (tWRRD)...............Auto Read CAS# Precharge (tRTP)................3 ALL PRE to Refresh........................8 Read Delay Phase Adjust Page Channel 1 Phase 0 Pull-In.................Auto Channel 1 Phase 1 Pull-In.................Auto Channel 1 Phase 2 Pull-In.................Auto Channel 1 Phase 3 Pull-In.................Auto Channel 1 Phase 4 Pull-In.................Auto Channel 2 Phase 0 Pull-In.................Auto Channel 2 Phase 1 Pull-In.................Auto Channel 2 Phase 2 Pull-In.................Auto Channel 2 Phase 3 Pull-In.................Auto Channel 2 Phase 4 Pull-In.................Auto Clock Setting Fine Delay Page DLL and RCOMP Settings .................By Menu Ch1 DRAM Default Skew.....................Model 5 Ch2 DRAM Default Skew.....................Model 5 RCOMP Setting.............................Model 0 Fine Delay Step Degree....................70ps Ch1 Clock Crossing Setting................Auto DIMM 1 Clock fine delay...................Current 2476ps DIMM 2 Clock fine delay...................Current 2476ps Ch 1 Control0 fine delay..................Current 472ps Ch 1 Control1 fine delay..................Current 472ps Ch 1 Control2 fine delay..................Current 410ps Ch 1 Control3 fine delay..................Current 394ps Ch 1 Command fine delay...................Current 472ps Ch2 Clock Crossing Setting................Auto DIMM 3 Clock fine delay...................Current 2492ps DIMM 4 Clock fine delay...................Current 2428ps Ch 2 Control0 fine delay..................Current 442ps Ch 2 Control1 fine delay..................Current 442ps Ch 2 Control2 fine delay..................Current 346ps Ch 2 Control3 fine delay..................Current 332ps Ch 2 Command fine delay...................Current 442ps Ch1Ch2 CommonClock Setting................Auto Ch1 RDCAS GNT-Chip Delay..................Auto Ch1 WRCAS GNT-Chip Delay..................Auto Ch1 Command to CS Delay...................Auto Ch2 RDCAS GNT-Chip Delay..................Auto Ch2 WRCAS GNT-Chip Delay..................Auto Ch2 Command to CS Delay...................Auto

click for larger image
http://www.edgeofstability.com/image...f_lin_64_s.jpg
11-16-2008, 08:39 AM
Praz

LP JR P45-T2R, E8600, 575x7.5, 2x2GB Memory 1152MHz, Post 2 of 3

XP SP3

click for larger image
http://www.edgeofstability.com/image..._occt_xp_s.jpg

click for larger image
http://www.edgeofstability.com/image..._3d06_xp_s.jpg

http://www.edgeofstability.com/image...warhead_xp.jpg http://www.edgeofstability.com/image...farcry2_xp.jpg

3dx Max w/V-ray
Time to render: 13min 05sec

click for larger image
http://www.edgeofstability.com/image...chmark_680.jpg

TMPGEnc XPress
1GB VOB file ripped from DVD movie

click for larger image
http://www.edgeofstability.com/image...ncode_xp_s.jpg

click for larger image
http://www.edgeofstability.com/image...f_cin_xp_s.jpg

click for larger image
http://www.edgeofstability.com/image...erest_xp_s.jpg
11-16-2008, 08:41 AM
Praz

LP JR P45-T2R, E8600, 575x7.5, 2x2GB Memory 1152MHz, Post 3 of 3

Vista 64 Bit SP1

click for larger image
http://www.edgeofstability.com/image..._occt_64_s.jpg

click for larger image
http://www.edgeofstability.com/image..._3d06_64_s.jpg

click for larger image
http://www.edgeofstability.com/image...3dvan_64_s.jpg

click for larger image
http://www.edgeofstability.com/image...pcvan_64_s.jpg

http://www.edgeofstability.com/image...warhead_64.jpg http://www.edgeofstability.com/image...farcry2_64.jpg

3dx Max w/V-ray
Time to render: 14min 50sec

click for larger image
http://www.edgeofstability.com/image...chmark_680.jpg

TMPGEnc XPress
1GB VOB file ripped from DVD movie

click for larger image
http://www.edgeofstability.com/image...ncode_64_s.jpg

click for larger image
http://www.edgeofstability.com/image...f_cin_64_s.jpg

click for larger image
http://www.edgeofstability.com/image...erest_64_s.jpg
11-19-2008, 10:41 AM
jcool

Quote:

Originally Posted by Praz

Might want to try another BIOS. 10/07 I used for the screenshots doesn't appear to have the issue. I do have VDROOP set to "Disabled" but that was a mistake on my part. I was doing some other testing and forgot to change it back to "Enabled" when I did those benches.

I now have the 10/30 BIOS loaded and VCORE is fine with it when both EIST and C1E are "Enabled" regardless of VDROOP setting.

Where do I get the 10/30 bios?
I downlaoded latest bios from DFI (it's the 10/07 I think) and the issue is still there.
As soon as EIST is enabled, it raises the Vcore to 1,39V when loaded (idle is 1,23-1,24V like it should be). Tried with Vdroop control enabled and disabled.
EIST off and it's 1,23V regardless of C state (running the E0 E8400 at 4Ghz).
C1E always enabled...
11-19-2008, 11:02 AM
Praz

Quote:

Originally Posted by jcool

Where do I get the 10/30 bios?
I downlaoded latest bios from DFI (it's the 10/07 I think) and the issue is still there.

DFI's site - Beta section
10/30 BIOS
11-19-2008, 12:27 PM
jcool

Thanks.. will try tomorrow. Apart from that the mobo passed every test I could think of with flying colours. I only had to lower GTL refs to 0,63.. the E8400 hated the stock GTL settings (0,67) of the mobo :shrug:
11-19-2008, 12:35 PM
Praz

Quote:

Originally Posted by jcool

Thanks.. will try tomorrow. Apart from that the mobo passed every test I could think of with flying colours. I only had to lower GTL refs to 0,63.. the E8400 hated the stock GTL settings (0,67) of the mobo :shrug:

You're welcome. Hopefully you see better results with that BIOS.
11-19-2008, 03:13 PM
jcool

Well, if EIST would work, the whole rig would consume approx. 50W less while in idle. Subsequently, temps would go down, which in turn means lower fan rpm.
If only they would have implemented some sort of fan control (no, CPU fan only is NOT a fan control...). If I had to pick 1 point I don't like about this board, it would have to be the lack of fan control capabilities.
This is when I wish Abit wouldn't leave the market...
11-23-2008, 11:33 AM
nullface

Oh i love this little thing, but how stable is the vcore? Is it "Commando VCore", or is it pretty stable with only 4 phase.
11-23-2008, 02:59 PM
jcool

With Vdroop control disabled, the Vcore doesn't move 1 bit like on the "big" 8 phase X38/X48 UT/LT boards. Idle = load Vcore, at least with the E8400@4Ghz.
11-23-2008, 03:46 PM
nullface

Nice, then its this or the ud3p, need a mono to keep my ddr2 rig alive. Any sugestions?
11-26-2008, 04:22 PM
jcool

I am happy to report that EIST works correctly with the latest 10/30 beta bios. 1,15V idle/1,23V load now.
11-26-2008, 04:34 PM
Praz

Quote:

Originally Posted by jcool

I am happy to report that EIST works correctly with the latest 10/30 beta bios. 1,15V idle/1,23V load now.

Good to hear you got it sorted. If you use C1E/EIST with Vista don't use the Balanced Power plan and the x7 multiplier together. A bug causes the multiplier to stay at x6. All other multipliers work as does changing the power plan to Performance.
11-26-2008, 04:48 PM
jcool

Thanks. I only use E8400's at max mult with this mobo tho.. got 5 DFIs in yesterday, all 5 gone already :D
Best E8400 needed 1,19V to do the 4Ghz, worst 1,29V. All liked the 0,63x GTL ref/1,10V VTT combination for FSB 445.
I really like this mobo, no headaches really.
12-16-2008, 09:24 AM
Envy

pics of DFI LP JR X58-T3H6 MicroATX Board
12-16-2008, 07:19 PM
Pedalmonkey

cant wait for that M-ATX board to come out
02-26-2009, 01:16 PM
dMITIj

anything new on this mobo? BIOS, Quad and so on?

Show 100 post(s) from this thread on one page