Great Vince
i want one 9800gx2
Printable View
Great Vince
i want one 9800gx2
LOL...can you tell how tired I was when I typed that? :DQuote:
Originally Posted by bonzo_catalin
I figured out the mods 2 days ago with some help from gautum. Not too difficult as it uses the same volterra digital vreg controller as the ATI 2900-3870x2. The Ln2 results are using approx 1.35v gpu :DQuote:
Originally Posted by Gl@re
It's amazing man :D. This container can easily handle this card and the mounting scheme is PERFECT. It really is alot less headache than mounting up two units per card.Quote:
Originally Posted by LardArse
Not at all difficult. So easy. Guide will be posted today in tek thread and units will start shipping later this week.Quote:
Originally Posted by Rol-Co
You and stoolman are the most patient guys in the world, but I told you it would be worth the wait for the slims. You guys are the first to recieve them.
Bascially, these new 4.0 gpu units ARENT't exclusive to just this card :D. They are my new universal slims which work with ALL the video cards 7900gtx-800ultra-8800gts-8800gtx-2900xt-3870-3870x2-9800gtx and last but not least 9800gx2 :D.
k|ngp|n i have question for u. Is this cart worth of buying?i saw couple of tests of 9800GX2 on the net and the score in 3dmark 2006 14k,15k. What score is a thrue score?
One question...why did you use the "old" 173.67 drivers instead of 174? Thx :)
Nice start my friend....... ;) :up:
Hmmm....I see Voltera and 3 x Phase for each card :( ....NOT good.....
EDIT: Does ONE 9800GX2 works on and X38, P35 Intel platform as a SINGLE VGA OR NOT?
.
Nice results from first start :up: can't wait for more results on coming up :D
lol i should have known.Quote:
Originally Posted by k|ngp|n
ohh really intresting!
I want one...or 2 GX2...:D
thanx george, havent tried it on INTEL board yet so can't say for sure.Quote:
Originally Posted by hipro5
Cuz I was too lazy to install the new one :D.Quote:
Originally Posted by Monstru
NVIDIA also release new bios for the 790i motherboard with some nice performance improvements incuding higher vdimm, internal spp latency adjustments (I think similar to performance levels) which impact performance using very high FSB/DDR3 speeds. They also raised the FSB limit on the motherboard quite a bit supposedly.
Bios I use for these runs was buggy beta pre-release bios so it's only going to get better and better :D
should be good this new one :DQuote:
Originally Posted by k|ngp|n
higher vdimm will definitely be good. :D
this pre-release bios is faaaar from buggy that's for sure
i am planning on testing high FSB performance with new bios again in the next day or so....should be good fun
vince when do we find out more about this new killer pot of yours
i bet these new suckers will be REEEEEEEEEAAAAAAAAAAL popular :D
EVGA guys are telling me it's much better so I will flash to it today.Quote:
Originally Posted by dinos22
As for 4.0, look for more pics and isntall guide in the ln2 forum/tek thread later today
Andre Yang came over my house when I was half-dead yesterday and was all over the 4.0 :D. I think he wanted to take them with him pretty bad lol
k|ngp|n
What score in 3dmark 2006can i get with this card and quad@ 3600mhz,2gb crucial@1000 4 4 4 12.?? with some card oc? Circa 20k? 19?
Haha, how great...Quote:
Originally Posted by k|ngp|n
Looking forward to the thread...
COMPLETELY stock clocks on both cpu/gpu 1333x9 and stock card clocks it scores about 17k 2006Quote:
Originally Posted by klataa
With whole system still stock cooled and quad at 450x9=4050mhz / card at STOCK clocks of 600/1500/1000, it scores about 21.9k 2006.
Wow, 30K with a single card, nice score! GX2's are awesome, loving my setup :D
Great work vince! :toast:
Hey what is max Pci-e clock on nf790i chipset?
hopefully there isn't the same issue with these gx2 card in quad sli as there was with the 7950gx2 where the gain was like 2%.
Its not fair! Why do REPs get all the goodies while im sitting here drooling? :slobber:Quote:
Wow, 30K with a single card, nice score! GX2's are awesome, loving my setup
Nope, thanks to AFR rather than SFR+AFRQuote:
Originally Posted by hedge
Nasty setup you have there, Jakup! :D
dude, one 9800gx2 can do about 30k in 3dmark06.. it takes two 3870x2 in crossfireX to do about 32k... thats fudging lol! :rofl:
ATI will get RAPED when Vince put up two 9800gx2's in SLI (well actually quad sli :P)
I love nvidia...
Oh, btw why do you lower the CPU overclock a bit in 3dm06? u did almost 6ghz in 2001 so why not in 06? whats up with that?
Ps, jAkUp are you rich or what?
Because 06 is a bit harder than 01 ;) :D
I'm always very impressed with you guys! 29k from a single card is very good! I cant wait to see what two of them do! :shrug:
Awesome results k|ngp|n! I just ordered my EVGA 9800GX2 from Newegg this morning. What most impresses me about this particular card (aside from LN2 :)) is that you managed to achieve a 754MHz core and 1933MHz shaders. May I ask exactly how you got these speeds? Was there any additional cooling in the processes such as fans or a specific room temp, or do you suppose that 754/1933/1145 will be achievable on all of these cards? I would like very much to be able to obtain these clocks - my specs are in my sig for reference. Looking forward to your insight. Thanks in advance.
So because its more demanding he needs to lower the clock a bit? or else it will be unstable and the system will fail? That's the case?Quote:
Originally Posted by massman