NF7 240mhz-ableing mod

Quote:

---

Originally posted by Shroomalistic
Is anyone having a problem at hitting 500 fsb with high vcore. For me, anything over 1.8volts and I have to lower my fsb.

So at 1.8volts on cpu I can run at 250x9.5. But at 1.85volt on cpu @ 250x9.5 it wont go into windows. But lets say I lower it to 245x9.5 @ 1.9volts and its fine.

Anyone else have this problem, is there a fix for it?

---

Mee too :D

But when my board was in its best shape it could get at 250x11,5 max timings dc with 2,06V into win and bench a bit (no 3dmark though)

my pics didnt work so here they are again

my highest sandra so far

Shroomalistic what'd you do to finally get it to work?

Had to disable apic in bios and format with fresh install.

used clockgen and got higher

heres my sandra

Didn't you scores go down from when APIC was enabled?

i was never able to get this high before so i dont know what it was.

cpu interface is enabled, if thats what your talking about

Yep that's what I meant, as in the link I posted I think that was a by product of turning it off. I have issues myself when setting a high vcore. Would expect your memory scores to be a lil higher.

so if i was able to do those settings with it enabled i would probly score 3900 in sandra. Anybody get 3900 in sandra with an nf7?

http://www.xtremesystems.org/forums/...threadid=23394

The mp 11 is not realy stable on the D10 bios here.
Any tips?

Quote:

---

Originally posted by ThommY
The mp 11 is not realy stable on the D10 bios here.
Any tips?

---

Yes, not stable at all. Try bios 14 beta and see if it helps.

Quote:

---

Originally posted by Iolao
Yes, not stable at all. Try bios 14 beta and see if it helps.

---

But can it use mp 10 - 10.5 and above for +220 fsb?

Quote:

---

Originally posted by ThommY
But can it use mp 10 - 10.5 and above for +220 fsb?

---

No. At least not over 223/225+

Quote:

---

Originally posted by ThommY
But can it use mp 10 - 10.5 and above for +220 fsb?

---

not :( But he says he's gonna use mp 11x

i was able to 260 but only with a 8 multi, i think my voltages are holding me back now.

Quote:

---

Originally posted by Shroomalistic
i was able to 260 but only with a 8 multi, i think my voltages are holding me back now.

---

Was cpu interface enabled? Was apic on?

Since he disabled apic during his install, I doubt he's turned it back on again...

wimpie007, thanks for pointin that out.

no problem, I'm planning some high bus speeds too once I get my nf7-s from rma ;)

cpu interface is on always. I think i might turn it off and try for higher. Forgot about that setting.

What kinda memory scores ya getting at that speed?

iceman2g, who are you replying to now? :)