Looks like funkflix hit the jackpot 2 times with the BP chips! the CP and DP don't look to work as well.
Bret
Looks like funkflix hit the jackpot 2 times with the BP chips! the CP and DP don't look to work as well.
Bret
Priming:
http://www.maxcabral.com/overclock/3.2GHz%201.4v.jpg
Somewhat stable:
http://www.maxcabral.com/overclock/3.2%201.2v.jpg
The second shot is actually below the stock voltage for this chip :).
I set it arbitrarily at 1.4v (actual, set to 1.3875 in BIOS). I have a feeling it would be be stable at lower voltages as well... just not at stock volts ;).
The main issue I'm having right now is I can't get the HTT over 300. It's a bit flakey over 294. I'm kind of wishing I had that 12x multi now :D. This is a NICE chip. I'll post the stepping tomorrow most likely. Any assistance with the HTT issue would be appreciated. I'm going to try the latest BIOS to see if that helps.
Are you on a M2N 32 Deluxe?
I was having problems with the new 1402bios and 1503bios...I couldnt open windows....
I found that if your running 500MHZ ram it like to be set to 1066 to run ...Im now running 1603 Beta with my 6000+ to work out some bugs and then i may put my LE1620 back in and give it another shot ,,Now that i Have a working bios made for the LE/Phenom!It takes different settings that what it used to be with my 6000+...And @ 13x270 ,,it post me @ 4000mhz when its suppose to be 3.5ghz..So i have some work to do:shakes:
With all the same settings as the 1201 bios,,This new 1603bios is 2s slower in superPi....Im trying to work that out ...Cpu-Z wont show what my Ram is set to...I know its suppose to be 1000mhz @14x250 with the 1066/divider..But i cant read my fricken ram.!
Now with the DFI 790FX-M2R and just air! :D
http://www.gravedigga.de/gravedigga/...M2R/system.jpg
http://www.gravedigga.de/gravedigga/..._air_small.jpg
Should be overall AMD air WR without any problems and that even without any subzero or special ambient temps! :D That CPU is so awesome!
You guys are killing me I'm sitting here waiting for UPS to show up so I can see what I got!
Air... chilled air and my LE-1600: :P
http://one.xthost.info/cichas/spi/Pi1M_22062.png
Oha, thats unbelieveable fast mate! :eek:
What is your special tweak? :D
Some tweaks together :) Do you use copy waza with 1M? Sometimes give ma up to 0.4s hit in 1M and somtimes it's 1s worse time. SPi is strange benchmark :shrug:
Hmm. No Copywaza, just maxmem and clean windows.Quote:
Originally Posted by hary
Can you make some run with 3000MHz / 600MHz 4-4-4-x 2T, but without Copywaza? That would be nice! :)
Without CW, normal priority.
http://one.xthost.info/cichas/spi/1m_3_600.png
Thanks a lot! It seems that it is Copywaza that give you the boost! Will try that too soon. Nice result you got there with 22.062s! :toast:
Here is my 3000MHz result, with normal prio too:
http://www.gravedigga.de/gravedigga/...0mhz_small.jpg
Really great result funkflix :clap:
I think my could be some beter than this one I showed. My memory need airflow for such MHz (2.83VDimm) and I'm so lazy :rofl: This is only first shot . next time I got an error.
Or maybe your DFI 790FX is so fast ;)
790FX-M2R is as fast as K9A2, or M3A32. Which board do you use?Quote:
Originally Posted by hary
Did a fresh install of my windows and improved my previous 3000MHz 1M record by 0.030s! Screenshoots are already updated. :toast:
at all
those are all fantastic clocks from your cpu's guys. Absolutely a dream but a year ago.
keep up the good work :up:
harry uses DFI infinity ultra-m2 ;)
edit
hary :D
bylem blisko ;)
(I was close :D)
yeah, but SLI version :p:
Ok, nforce 5 is a bit slower then full tweaked 790FX, but just about ~ 0.050s. But your board looks like a great clocker! Had some problems with my Asus M2N-SLI Deluxe.. Never thought someone can hit 600MHz memory on nforce 5.. :p:
It's nForce4 ;)
What CPU cooler is that?Quote:
Originally Posted by funkflix
Great clocking guys!
I really want LE-16xx for my secondary rig :D
Ups. ;)Quote:
Originally Posted by hary
Thermaltake BigTyp 120 VX.Quote:
Originally Posted by karbonkid
Well finally everything got here! I'm not as lucky as funkflix mine are both CP's I guess I get to try fooling with them now. Going to make sure these two new sticks of Ballstix work out well first though.
Bret
Guyz, what would be 24/7 stable on some good air cooling?Tnx
My CPU is about 8h prime stable at 3370MHz with 1.45V @ bios (real: 1.44V idle and 1.46 stress). Scythe Ninja.
Think they are good for some stable 3300MHz too! Good luck! :toast:Quote:
Originally Posted by sstrokerace
~ 3300MHz should be doable on the most 1620s. :)Quote:
Originally Posted by kamango
Now bedtime and tomorrow some dryice benching! :D