D-tek nozzles

Printable View

Show 100 post(s) from this thread on one page

10-10-2007, 10:31 PM
higgins

Quote:

Originally Posted by HotGore

So which are the best nozzles?

...

Quote:

Originally Posted by nikhsub1

I cant speak for the quad but the smallest nozzle (4.5mm) will be the best bet no doubt about it. I tested 4.5mm, 6.5mm and 7.5mm nozzles and the bigger ones are not worth the effort IMO. I do believe that Danny made a 5.5mm nozzle at my request but I was not able to test that one as it was never a prototype size. 5.5mm would possibly be a good alternative to those obsessed with system flow rate at the detriment of CPU temps (I never understood this mentality but w/e). The Fuzion with the 4.5mm nozzle is just a bit better in terms of pressure drop than a GTX so in my book the 4.5mm is ideal - and it tests VERY well as you can see. I asked Danny to have a 3.5mm nozzle made for me as there is still too much flow with the Fuzion and the 4.5 mm nozzle in my loop (system NEVER bleeds LOL).
10-11-2007, 06:30 AM
disruptfam

so the 4.5mm nozzle would be good for cpu loop only setup's???
10-11-2007, 06:35 AM
nikhsub1

Quote:

Originally Posted by disruptfam

so the 4.5mm nozzle would be good for cpu loop only setup's???

wow u guys either dont read or dont think... 4.5mm nozzle has MORE flowrate than the GTX. I run my 4.5mm with a GPU on same loop.
10-11-2007, 06:37 AM
Baleful

For a cpu only loop either the 4.5 or the 3.5. nikhsub1 tested the nozzles and the 4.5 performed the best. Danny never got a 3.5 to him to test, but said the 3.5 would probably perform better than the 4.5. Only time and testing will tell.
10-11-2007, 06:49 AM
disruptfam

Quote:

wow u guys either dont read or dont think... 4.5mm nozzle has MORE flowrate than the GTX. I run my 4.5mm with a GPU on same loop.

Giv a noob a break BUDDY, i didn't fully understand what i read so that's why i asked
10-11-2007, 10:03 AM
Sadhana

Quote:

Originally Posted by Petra

... We still have some... :)

Out of stock :(
When it will be available again?
10-11-2007, 10:13 AM
IanY

I await some quad core results.
10-11-2007, 10:40 AM
Xilikon

Quote:

Originally Posted by IanY

I await some quad core results.

+1 :)

NCIX had it in stock currently.
10-11-2007, 11:11 AM
iadstudio

$25 shipped to US!?!? I'll wait til' Petra's gets them back in stock.
10-11-2007, 11:57 AM
Canadmos

Are you sure you went to ncixus.com?
10-11-2007, 11:59 AM
Raxxath

Quote:

Originally Posted by iadstudio

$25 shipped to US!?!? I'll wait til' Petra's gets them back in stock.

Yeah, NCIX has some great prices, and a large variety, but shipping costs really hurt. I hope that some day they get a warehouse in the US.
10-11-2007, 12:16 PM
LinusTech

It ends up being a better value to buy from us if you're going to order a few things at a time. On small items the shipping is hard to swallow, but there's not much we can do about it right now :(
10-11-2007, 12:53 PM
nikhsub1

WEll i just measured the nozzles now that im at work... the smallest is a 3.5mm, Alex was right. Now I need to swap :D
10-11-2007, 03:19 PM
The_Beast

I'd like Quad results

thank you
10-11-2007, 03:35 PM
nealh

hey anybody get a ship notification?

Usually they ship real fast..now not sure if there is a problem with my payment CC...USPS recently changed my zipcode..real pain for paying for stuff
10-11-2007, 03:53 PM
Walternowi

Quote:

Originally Posted by nealh

hey anybody get a ship notification?

Usually they ship real fast..now not sure if there is a problem with my payment CC...USPS recently changed my zipcode..real pain for paying for stuff

I got a shipping notification less than 2 hours after I ordered yesterday.
10-11-2007, 04:34 PM
voltaire2030

Quote:

Originally Posted by Xilikon

+1 :)

NCIX had it in stock currently.

Their only missing the Fuzion CPU block to make my day ... but Linus said that they should have it soon !
10-11-2007, 04:56 PM
AAjax

Quote:

Originally Posted by nealh

hey anybody get a ship notification?

Usually they ship real fast..now not sure if there is a problem with my payment CC...USPS recently changed my zipcode..real pain for paying for stuff

Just got mine today :)
10-11-2007, 05:04 PM
nealh

Quote:

Originally Posted by Walternowi

I got a shipping notification less than 2 hours after I ordered yesterday.

well I ordered at 10pm est..so I did not expect to ship last night...I ordered once before and they had to call my home...probably the stupid zipcode...USPS updated but few online places even recognize the new zip yet

I got my ship notice just now..so my CC was ok I guess....woot

I hope I did not cause Petra's any issues
10-11-2007, 06:23 PM
the highlander

mine has been shipped... hope they come with a pen!!!
10-11-2007, 06:30 PM
Petra

Quote:

Originally Posted by nealh

I hope I did not cause Petra's any issues

None at all... We've just been really busy and I didn't have a chance to process today's/last night's USPS orders until a little while ago (speaking of which, I should be off to the USPS... then back here to do more work... woo... :rolleyes: ).

Quote:

Originally Posted by the highlander

mine has been shipped... hope they come with a pen!!!

If you shipped via USPS First Class Mail, then you probably didn't get a pen (remember, FCM is by the ounce). Generally speaking, all of the other shipping methods get pens.
10-11-2007, 06:34 PM
the highlander

I have never gotten one :(
10-11-2007, 07:16 PM
LinusTech

I've never gotten a pen either :(

And it's not like I don't order from you, Alex ;)
10-11-2007, 07:18 PM
pak

Quote:

Originally Posted by Petra

If you shipped via USPS First Class Mail, then you probably didn't get a pen (remember, FCM is by the ounce). Generally speaking, all of the other shipping methods get pens.

If I would have known this, I would have have requested over night early morning delivery. I ended up doing first class :-(

But I did get my nozzles today! Thanks again.

--pak
10-11-2007, 07:25 PM
Jedda

Got a pen first time by US first class, but not since, despite liberal hints, outright pleading, begging on my knees etc

Show 100 post(s) from this thread on one page