Striker pwns EVGA with Q6600 G0

i have had 3.82 stable with or without vdrop mod, its not really necessary, because u just have to apply the voltage knowing the vdrop ur board has, mine has a .04drop under load other than the fact that if i set 1.52v in bios its 1.49v in windows, i processor wants 1.50v under load to do 3.8, i ran prime on it for about 3 hours.

by the wasy here is a link to the pencil mod, it works for sure on the striker. i am running at 3.7 right now, prime temps are 60c load, and when i run seti@home which loads all cores to 100%, the temps are 50c.

LINK to the mod
http://www.xtremesystems.org/forums/...d.php?t=134100

depends on whose opinion. my EVGA pwns your striker hits over 460MHz stable.

466 prime on my XFX hahahah :p

Quote:

---

Originally Posted by dinos22

466 prime on my XFX hahahah :p

---

primed 470 btw.:p:

Quote:

---

Originally Posted by pumbertot

depends on whose opinion. my EVGA pwns your striker hits over 460MHz stable.

---

Good for you,

I basically only like the Striker for a few reasons, I got what I paid for, a solid 680i board, with very acceptable overclocking abilities.

The best thing about the Striker is I have only had one of them in 6 months, compared to the 4 EVGA's I went through in 3 months, and the 2 IN9 32-X Max's in 3 months. So yeah, so far for me the Striker pwn's the other's because it has held up.

Quote:

---

Originally Posted by pumbertot

depends on whose opinion. my EVGA pwns your striker hits over 460MHz stable.

---

Like i said, for those of you who got lucky and got a good reference board, more power to ya! I wish i wouldn't have had to go with the striker, but after 15 motherboards, it is FACT in my book. Congrats on a good board. You are a lucky one.

yeah i see your point guys maybe i gotlucky. but my treatment was first class. i bought a faulty AR, then RMAed for free to A1 whihc has turned out to be amongst the best 680i boards out there.

Quote:

---

Originally Posted by pumbertot

yeah i see your point guys maybe i gotlucky. but my treatment was first class. i bought a faulty AR, then RMAed for free to A1 whihc has turned out to be amongst the best 680i boards out there.

---

My treatment with EVGA has been better than first class. hell it took longer to get my first striker RMA than the first 6 EVGA's combined. When my EVGA worked it was awesome. I loved it. Now that i've added so much water, i just cant deal with the hassle of changing it every month or so. Majority of my issues were the -- on the display. Change a CPU, reboot and --, No fix.

Quote:

---

Originally Posted by nugzo

My treatment with EVGA has been better than first class. hell it took longer to get my first striker RMA than the first 6 EVGA's combined. When my EVGA worked it was awesome. I loved it. Now that i've added so much water, i just cant deal with the hassle of changing it every month or so. Majority of my issues were the -- on the display. Change a CPU, reboot and --, No fix.

---

exactly, i went through 4 evga's in 6 months, service was first class, yes. but i didnt want to change out my board every month, if someone has a good evga of bfg of xfx board thats good but i personally would never buy a reference 680i board period. i am no fan of any company, because asus is still a 680i but i hate the reference boards, search online even in evga forums where people are having crap load of problems. this thread is about stirker overclocking the quads almost as good as evga, because people like me thought that it didnt, thanks go nugzo for pointing it out.

Hi guy's, I just got my third RMA board from EVGA this week back again and pretested Q6600 G0 it worked on P5K board up to 3.9 stable for bench, now I made Vmod on the 680i and everything looked great, until I push for more. So I tried to OC over 3.6 and no luck with it :( today I just played with it and after all I got the two - - magic dashes :) So I'll send this board back again tomorrow but I'm not going to deal any more with it, that's it I don't want it any more f..k it I'm watching out for some new board now, but I don't like Asus bc of the bad support.
I don't know what to get any more, so if any sugestions no need for SLI.
Good Luck guy's :)

Quote:

---

Originally Posted by Dede99

Hi guy's, I just got my third RMA board from EVGA this week back again and pretested Q6600 G0 it worked on P5K board up to 3.9 stable for bench, now I made Vmod on the 680i and everything looked great, until I push for more. So I tried to OC over 3.6 and no luck with it :( today I just played with it and after all I got the two - - magic dashes :) So I'll send this board back again tomorrow but I'm not going to deal any more with it, that's it I don't want it any more f..k it I'm watching out for some new board now, but I don't like Asus bc of the bad support.
I don't know what to get any more, so if any sugestions no need for SLI.
Good Luck guy's :)

---

"two - - magic dashes" welcome to my hell that i went through, 3 out of four boards that i had died that way man, i finally spent 50 more bucks and got me a striker from mwave.com, they have the cheapest price on the striker. and i am glad again that nugzo brought this thread forward, otherwise i would be switching out evga boards. if you dont want evga and no sli than go with the p35 chipset, either abit or asus or gigabyte, honestly great service is good but great service doesnt do any good if i am gonna be changing out 4 board in six months. striker now is probably the best board for 680i chipset with reliability. doesnt act funny like evga boards did to me, it would lower the multiplier even though i had every cpu feature disabled in the bios. i would stay away from reference 680i design.i havent had asus rma experience because i honestly have never returned a board to asus, and i wasnt getting the striker because i thought they didnt overclock too well with the quad cores. i highly recomment the abit ip-35 pro. great board, for a single card setup, i was able to get 3.6 highest stable with that board and with the stiker i have hit 3.82GHZ prime stable but i have lowered it to 3712 for my 24/7 setup with c1e enabled in bios, because i dont need that much power while i am idling. under load it shoots up to 3712

Quote:

---

Originally Posted by Dede99

I don't like Asus bc of the bad support.

---

Agreed about the support. Most of the time you dont need it though.

Quote:

---

Originally Posted by NKD

"with the stiker i have hit 3.82GHZ prime stable but i have lowered it to 3712 for my 24/7 setup with c1e enabled in bios, because i dont need that much power while i am idling. under load it shoots up to 3712

---

3.825 was my max stable also. I normally run 100mhz under max stable. 3712 is my 24/7 now at 1.5v. No c1e though

what are the pro's vs. the con's about c1e? don't have to go into too much detail, just a quick explanation lol.

c1e drops multiplier when at idle for power savings

i either game or browse on the ineternet, so i really dont need 3.7ghz quad core while i am browsing the net and doing personal work.

with c1e i run at 2472 idle, it drops my multiplier to six. and under load the multiplier kicks in to 9.

i'm in the same boat as you NKD... i'll have mine set.

Instead of all that idling, why don't you guys put them to good use and help out the xtremesystems WCG team? We could really use all the help we can, and you can put all that idle computing time to good use!

Just have a look in the World Community Grid portion of the forums for more info.

Vpll is the key. ASUS board probably has higher Vpll voltage over eVGA that's why your quad-core overclocks better.

Vpll = 1.2Ht ?

I wouldn't say Striker overclocks better than the EVGA, maybe it does better than earlier reference boards, but most peeps had bad issues with the Striker and quads, just due to the fact they need to be setup totally different then overclocking dual cores and peeps were tweaking the wrong way... and got stuck around 333-360FSB,..., due to the numerous FSB holes and wrong settings.... and we were laughed at sooo many times by reference board users about our Anus superexpensive board

But I think we didn't make such a bad choice after all... my board is reaching one year now and besides the CPU init when I get the mobo out and fiddle on my Cube I have zero issues with mine.... ( thank GOD for the good old battery trick !! )

Thanks nugzo, for making this thread. I was planning on getting an evga board but now I'm going to skip the trouble and just buy a striker :up:

Quote:

---

Originally Posted by Type.Xero

Thanks nugzo, for making this thread. I was planning on getting an evga board but now I'm going to skip the trouble and just buy a striker :up:

---

Your welcome! I think your making the correct choice.

Anyone remember the setting to turn off driver certification?
I'm running the 64-bit edition of Vista, and i can't get CoreTemp to read. In fact, PC PROBE from Asus isn't showing as much as it used to.

actually linflas i do run seti@home. it alwasy running in the backgraound, and with 100% load my temps ar 52c on the highest core, and with prime they are 58-59c, i will look in the wcg section, thanks for pointing out.

Quote:

---

Originally Posted by linflas

Instead of all that idling, why don't you guys put them to good use and help out the xtremesystems WCG team? We could really use all the help we can, and you can put all that idle computing time to good use!

Just have a look in the World Community Grid portion of the forums for more info.

---

Done.

alirght joined the xtremesystems team, running the WCG now, however it doesnt seem to load all cores to 100%. keeps jumping up and down.LOL? well i am glad to be a part.