[First Look] Retail Box DFI UT LP P-35-T2R (56K Warning~~)

Printable View

Show 100 post(s) from this thread on one page

08-02-2007, 07:47 PM
vbo

I really doubt X38 will be able to go so high like P35 goes. The two PCI-E lines 16x and the enhanced memory controller make it much more hot.

I'm expecting ~480Mhz FSB in average.
08-02-2007, 08:50 PM
doghouse

Price seems good to me, particularly when compared to overhyped Asus boards. Its good to see DFI get it out with what is minimal delay but max R&D. When you consider how Asus release ROG and Giga release v1. v2. v3. boards its seems very cynical. Let the market bug shoot any issues and then release a new board with all issues resolved but a put a fancy name and a premium price.

Kudos to DFI :up:

Im a little uncertain about the heat pipe deal but I assume its there for a reason.
08-02-2007, 09:19 PM
AndreYang

I asked Oskar about PCI Express probelms and he said P35 only has 16X+4X+NC or 16X+1X+1X.

And BOX write NV Raid is not correct. 6XSATA are ICH9R and 2XSATA Raid are JMicron JMB363.
08-02-2007, 09:21 PM
AndreYang

Quote:

Originally Posted by Grinch

for:
DFI 680i LT NF-680i LT SLI...?

for DFI LP P35.

I also have 6/25 BIOS for 680i LT if you need.
08-02-2007, 09:54 PM
Brother Esau

Quote:

Originally Posted by AndreYang

I asked Oskar about PCI Express probelms and he said P35 only has 16X+4X+NC or 16X+1X+1X.

And BOX write NV Raid is not correct. 6XSATA are ICH9R and 2XSATA Raid are JMicron JMB363.

Andre...what does 16x+4x+NC stand for? Primarily the NC portion!! Does that equate to NO CURRENT????
08-03-2007, 12:25 AM
alpha0ne

Quote:

Originally Posted by doghouse

Price seems good to me, particularly when compared to overhyped Asus boards. Its good to see DFI get it out with what is minimal delay but max R&D. When you consider how Asus release ROG and Giga release v1. v2. v3. boards its seems very cynical. Let the market bug shoot any issues and then release a new board with all issues resolved but a put a fancy name and a premium price.

Kudos to DFI :up:

My thoughts exactly :up:

I really wonder about ppl saying the price is too high (any price is too high for some :rolleyes: ) for this board when Anus are charging MORE for their top end boards

I dont see many ppl spamming those threads (Anus) with OMG its just tooo expensive arrrgh what a rippoff ohhhh sell the 'kin kids and STFU :rolleyes: :ROTF:
08-03-2007, 12:30 AM
Diverge

Quote:

Originally Posted by Brother Esau

Andre...what does 16x+4x+NC stand for? Primarily the NC portion!! Does that equate to NO CURRENT????

i'm assuming it mean No Connection or Not Connected. meaning the 3rd pci-e does nothing in that config.
08-03-2007, 12:40 AM
K404

Quote:

Originally Posted by Diverge

i'm assuming it mean No Connection or Not Connected. meaning the 3rd pci-e does nothing in that config.

Correctado!
08-03-2007, 02:23 AM
wedfighter

the 3rd PCIe slot only for PHysX card IMHO
08-03-2007, 03:50 AM
shimmishim

Quote:

Originally Posted by alpha0ne

My thoughts exactly :up:

I really wonder about ppl saying the price is too high (any price is too high for some :rolleyes: ) for this board when Anus are charging MORE for their top end boards

I dont see many ppl spamming those threads (Anus) with OMG its just tooo expensive arrrgh what a rippoff ohhhh sell the 'kin kids and STFU :rolleyes: :ROTF:

when i think about it, that's very true. i don't think i ever complain about the asus boards and how expensive they are...

but i think the thing that keeps me from complaining is the availability of their other boards...

as much as many people hate asus, think about one of the more successful p965 boards... the P5B deluxe... how many people still use this board today and think about when it was released... just my 0.02.

despite the price tag, i'm sure the DFI P35 will be an amazing board.
08-03-2007, 05:41 AM
Grinch

Quote:

Originally Posted by AndreYang

for DFI LP P35.

I also have 6/25 BIOS for 680i LT if you need.

what is different about it vs 521 bios?
08-03-2007, 06:53 AM
xgman

If DFI was selling as many boards as Asus, then the price would probably be lower. The volume on some of this high end stuff just isn't enough to make it cost any less, and like Tony said you more or less get what you pay for anyway.
08-03-2007, 07:37 AM
clone38

Cant find out when it`s getting released in the UK yet :/
08-03-2007, 12:09 PM
Walternowi

Quote:

Originally Posted by Tony

The fact is this, to get the chipsets clocking high latencies have to be relaxed, so you buy a cheap low multi CPU you think all you need is a board that does 600fsb to match everyone who has a higher multi CPU, fact is thats not the case.

You guys need to move past buying the cheapest and hoping to clock it up, it may get close but performance will always be sub par as latencies on the MCH etc are relaxed so you see more like Allendale performance from a Conroe.

Ofcourse DDR3 helps as it can do silly clocks, but for DDR2 you really are wasting your time over 500fsb UNLESS you stay 1:1 and tweak a ton of registers to dial speed back in, but overall its still not as fast as staying under 500fsb.

Same for 680i, same for 975, same for 965, same for P35....Infact 975 is fastest below 450 not 490.

Straps in a nutshell.
:up:
08-03-2007, 05:48 PM
Feichti

very nice board :)

but i will wait for the x38 boards because i want to have two 16x PCIe lanes for my 2900xt Crossfire cards :)

feichti
08-03-2007, 10:39 PM
krille

Wow. Looks nice!

Would you happen to know about this board's power consumption? Is it really high (in the ASUS P5K-Deluxe area) or moderate (20-40W lower than P5K-Dlx, in the Gigabyte/Abit P35 area)?

It's been a couple of days, when can we buy? :P
08-04-2007, 12:35 AM
mucker

The market has a funny way of adjusting itself.....e.g. PS3....(go figure that :rolleyes: )

The DFI looks great but will it really provide leaps better performance than, say, a $120 ABit IP35?

I would rather do an IP35 + 8800 GTX = $600 than T2R + 8800 GTS 320 = $560....but that's just me........

What would the real world performance differences be?
08-04-2007, 12:45 AM
Spanki

DFI LanParty UT P35-T2R Socket 775 New Motherboard $305.99 ETA 8/25
08-04-2007, 01:01 AM
Peakr

Quote:

Originally Posted by Spanki

DFI LanParty UT P35-T2R Socket 775 New Motherboard $305.99 ETA 8/25

Hmm the 25th. After reading some of these threads I had the impression it was due in a week or two.
08-04-2007, 01:15 AM
TEDY

lol price ;)

i told you it will be expensive :)
08-04-2007, 03:12 AM
jimmyz

Quote:

Originally Posted by Peakr

Hmm the 25th. After reading some of these threads I had the impression it was due in a week or two.

i checked that link and it says 10 available. i chose checkout and the number dropped to 9. it seems they have a few in stock? i have to spend a little money this weekend or i would go ahead and buy it.
08-04-2007, 03:55 AM
shimmishim

loooks like motherboardpro also has the infinity for pre-order due out the 15th of this month

http://www.motherboardpro.com/store/...&cat=84&page=1
08-04-2007, 05:54 AM
erwinz

I want this... waaaa... I just bought a motherboard last week.. :(

300 usd is just right for this caliber board.. :)
08-04-2007, 07:32 AM
TinTin

This new baby comes today and also a G0 Q6600. :)

http://bbs.ocqq.com/attachment.php?a...54&nothumb=yes

http://bbs.ocqq.com/attachment.php?a...55&nothumb=yes

http://bbs.ocqq.com/attachment.php?a...64&nothumb=yes

http://bbs.ocqq.com/attachment.php?a...57&nothumb=yes
08-04-2007, 08:00 AM
sergers

end of august eta is what kills it for me.

Show 100 post(s) from this thread on one page