ASUS P5K Deluxe Vmods.

Are those mods work for P5K PRO aswell? Specially Vcore and Vdroop? No need for PLL/Mem etc.

Thank you guys for all this information , very helpfull, question can i use a
10k vr cermet 15 turn instead of 50k ? since i live in a small island on the caribbean trimmer pots are very rare and hard to find , i got some 500k and 10k vr like 5 of each, is it possible to work something out for Vcore with any of those vr ? i only need vcore mod. Any help and guidance will be greatly appreciated.

chispy.

Bump... Anyone willing to help me or give me some advice and guidance ?

Quote:

---

Originally Posted by DonNiger

Are those mods work for P5K PRO aswell? Specially Vcore and Vdroop? No need for PLL/Mem etc.

---

I don't think, that you can use the Mods for the P5K Pro, but here you can find a V.Core Mod...;)

Quote:

---

Originally Posted by Dümpler

I don't think, that you can use the Mods for the P5K Pro, but here you can find a V.Core Mod...;)

---

Thanks, could you link the full thread?

Hi,
I got a P5K-E wi/fi mobo and I want to do the vcore mod and maybe vmch mod(runing out of multiturn trimmers:D ) but i want to see how much vcore voltage do I curently have.
bios set 1.700V
CPU-Z I got 1.632 I know there is a vdrop:(
but where can i mesure with a multimeter?

Quote:

---

Originally Posted by DonNiger

Thanks, could you link the full thread?

---

Sure, here it is...;)

Dows anyone can tell me the voltage-readpoints of the P5K Pro motherboard...?

IS it posible to get more then 1.5V on FSB Termination?

Where can I measure vcore with multimeter?

Hi!
Somebody can help me in P5K Premium Vdrop mod? How let me do it?
THX!

Just a heads up to those inquiring about vDroop. I know I posted somewhere on back in this thread about my solution.

I did the pencil mod, only to see a minor change in my vdroop. I did some reading, and found that people were commenting on wild vdroop after updating to a BIOS after 0602. I found and installed the older 0602 bios on my mobo. Vdroop has been minuscule ever since.

Quote:

---

Originally Posted by tcG

Sorry about the noob question, but could somebody tell me EXACTLY where to put the red lead, and exactly where to put the black lead, for measuring vCore based off of http://www.xtremesystems.org/forums/...1&d=1180378634

...this is my first time using a multimeter and I have no clue where to even start.

---

I'm also a newbie in this multimeter thing.

The measure points are just one point. Where I put the second lead from my multimeter? :confused:

I have a P5K PRO and the layout doesn´t match the one posted here for P5K. Does some one know out to do the vdroop pencil mod in this one?


http://img291.imageshack.us/img291/6673/testeuc9.th.jpg

It's amazing - a good board that does not have much info in net. No read points, no vmods....

Ahem, I just did the pencil mod for the vdrop and after that I had no power to my mobo. The light did not come on, nothing. I definitely grayed in the right thingo'. I made sure of that. I rubbed it off and after a few shots I have power again. Should I set everything in the bios back to default first?

Is there anyone here that can answer some questions about this mod?

I went to this thread to find info on this board. It's a good thread except that the read points are vague. So I sorted this out. The lead points are at these points I've circled in red for vcore read. The best way to solder to them is from the back of the board. I will post another picture later when I don't have the board setup. A good ground point is at the mb fastening point. Like where you screw the mb to your case. That's really a good ground point for any mod you do. If you're doing the hard mod there is no sense of doing the pencil mod. I know it's old hardware but it just so happens I'm benching old hardware. lol

http://jbpainting.net/vcor.jpg.jpg

:up: