Tracer PC2-8500

Great set, newegg has the NON-LED Tracers for $135 <---- WOW!!!

Can someone post some subtimings at those high 5-5-5-15 fsbs, I'm curious how these will compare to my GSkills @ 4-4-4-5.

Thanks!

Aye, the prices are dropping like mad. I just pick up a set of these 8500, $144 AR is too good to pass up! :)

added two more to the first post:



3-3-3-6
2.5v:
460.5MHz @ 3-3-3-6 with 2.5v - 32M


3-4-3-7
2.29v:
440.5MHz @ 3-4-3-7 with 2.29v - 32M


and updated the memtest shot to the 1500% version ;)

Great :D
Hopefully my sticks can do 3 3 3 x at 440mhz aswell :)
Would be perfect for benching 3D.

OZZIMARK, I've got a question from a newbie about ram overclocking; how do you know what timings to try; even when I know what each timing stands for (what the numbers change), I still have no idea which "combinations" to try. Is there any software or guide that might explain this. I'm going to try and overclock regular (gmh?) Crucial pc2-6400.

Quote:

---

Originally Posted by dekruyter

how do you know what timings to try

---

try different settings. if it has a positive impact on stability, what you changed to is good. if negative, it's bad. if no change but better performance, good. and again, the converse is bad ;)

from there it's really just guess and check :toast:

Can someone with these sticks post some Everest bandwidth benches starting at like 450 cas 3 to 620 cas 5 every 50mhz. Please.

Thanks!

just curious, why exactly do you want that? at given settings, performance is more dependant upon the motherboard than the ram itself :D

Quote:

---

Originally Posted by ozzimark

just curious, why exactly do you want that? at given settings, performance is more dependant upon the motherboard than the ram itself :D

---

Very true! Are you running them on a 680i board? If so can you post....

Thx

so, would you guys recommend these over the wintec ampx 8000 that is d9gkx?

Quote:

---

Originally Posted by PanteraGSTK

so, would you guys recommend these over the wintec ampx 8000 that is d9gkx?

---

Without a doubt.

Quote:

---

Originally Posted by EnJoY

Without a doubt.

---

Thanks, I will be ordering some tonight. These will end up costing me $20 less than the 1gig of gskill ram I'm using now. I can't wait to have some low voltage/high clocking memory. I think I hurt my gskill when I put 2.5v through it to get to 1250mhz. Now they are stuck at my timings in my sig.

Quote:

---

Originally Posted by momomo6789

agreed O_O http://i68.photobucket.com/albums/i5...67890/6004.jpg

i can boot 2.3v 1m @ 2.36v

---

Nice results. I'll see what these can do on my 650i board as well as my 965p board. I'm limited to 2.37v on my 965 board so my results will be somewhat limited. However, I can go up to 2.53v on my 650i board so we will be able to see if these like nvidia chipsets or intel. I can't wait.:banana: This will give me a reason to use my S3 again.

Ordered mine tonight. I will have to get that rebate in the mail quick tomorrow.:banana: I will finally have 2 gig of memory. I remember when 1 gig was overkill...

Ughhh.....what a great price for some memory! I dont know weather I should pick up a pair to replace my gskills or not.

I want something able to run on a 680i with tight timings @ 500 or greater!

Mine will be here today

Edit: there here already lol

with 2.81v set in the bios...
http://valid.x86-secret.com/show_oc?id=193365

too bad i seem to have hit a wall of sorts, 2.9v didn't really help at all... though i think there is still some room for tweaking drive strengths

Quote:

---

Originally Posted by ozzimark

with 2.81v set in the bios...
http://valid.x86-secret.com/show_oc?id=193365

too bad i seem to have hit a wall of sorts, 2.9v didn't really help at all... though i think there is still some room for tweaking drive strengths

---

Nice work 10 more mhz and you will have beat my record :)

Great CAS 3 clock. :thup:

Quote:

---

Originally Posted by Yoxxy

Nice work 10 more mhz and you will have beat my record :)

---

that's my goal. we'll see if i figure out this wall or not though :D

Just received my kit from FedEx :D

Popped them in the Quad GT, 600MHz 32MB 5-5-5-8 running with 2.35v.

First try, well see how it goes :) Pics to come.

CAS5 is easy 2.350v -

http://img250.imageshack.us/img250/1...mb36ghzat4.jpg

CAS4 not so easy for me :slapass: 2.500v -

http://img341.imageshack.us/img341/9...mb36ghzts5.jpg


Now I just need to tweak and I might find a decent time :p:

680MHz 5-5-15-5
6420
P5B Deluxe wifi
1Gb PC2-8500 Ballistix
Corsair 520
Vdimm : 2.45v
http://valid.x86-secret.com/show_oc.php?id=193992
Passed 1m

My wallet will really appreciate it if you guys stop posting these sick clocks.....

NEVER :D

messing around with looser timings before, i was able to boot into windows at 6-6-5, 570mhz with 1.8v. but my memory controller was freaking out and weird things were happening. :(