Quote:
Originally Posted by lowfat
This is exactly what im seeing on my DS3 3.3 rev b2 which is about 2 weeks old. :slapass:
Very disappointing.
Printable View
Quote:
Originally Posted by lowfat
This is exactly what im seeing on my DS3 3.3 rev b2 which is about 2 weeks old. :slapass:
Very disappointing.
i tested some E6600 with following steppings:
L629B479 | 3500MHz | 1.50v | aircooling - tuniq tower
L629F204 (pack date feb 2k7) | ~3850MHz | ~1.55v | aircooling - tuniq tower
L635A418 | 3700MHz | 1.52v | aircooling - tuniq tower
L637A464 | 3700MHz | 1.58v | aircooling - tuniq tower
L639A604 | 3600MHz | 1.58v | aircooling - tuniq tower
so for me, newer stepping are bad clockers, but it always can be exeptions. and we can find bad clockers with early steppings.
but isn´t that L629B479 you got the oldest?
I have a e6600 L632B086 which is running at 3.6ghz (400x9) at 1.43V actual. Is this good or average?
3.6GHz is pretty decent IMO. But a 32B is not a newer batch.
E6400 Q701A*** first impressions:
http://ceemic.pri.ee/c2d/16.797.JPG (dont look time, it sucks) 1,55V vcore(just in case); but my P5N-E has ~460-465MHz FSB "wall":mad:
ATM running 10+h Orthos @ 8x390=3120MHz@1,40V(first run, just in case:D ), 1,3xV NB
:down: No good, but I'll take it off your hands for more than you paid!Quote:
Originally Posted by smsmasters
PM me! :banana:
im expecting this e6400 to be a poor overclocker.am i right?
2.13ghz/2m/1066/06
fpo/batch#q704a052
malay
so im guessing the L630B136 in my sig should be one of the ok one's?
I'm loving my e6400 L626A. 1.35v for 3.2 or 1.42v for 3.8 AIR.
i need 1.475 to get me to 3.3ghz. but only 1.388 for 3.1ghz. ugh.
This needs 1.375vcore to get 3.6GHz 8hrs orthos stable and passes all other BM programs.
looks like i have got a week 04a, the newest batch of all.probably wont reach 3ghz no matter what i do knowing my luck.
Be sure to let us know in this thread.Quote:
Originally Posted by RAMMAN
My E6600 L640A needs 1,41V for 3,6GHz. :)
i still have to get everything installed first!Quote:
Originally Posted by CedricFP
L627B155 6600 does 3.4 at stock 1.325v, 3.6 at 1.3875, 3.7 at 1.4375, 3.8 at 1.5something, didnt really try to get it stable though at that speed. Yeah, I think that was a good week :cool:
I hear it's a good week as well.Quote:
Originally Posted by AndyM
volts straigght to 1.5. orthos testing at 3Ghz
L630F 6400
L631B102 E6400 #002
2850Mhz 1.07V
3200Mhz 1.18V
3500Mhz 1.29V
3600Mhz 1.33V
But still testing.
Im pretty sure it can do over 3,1GHz w/ def V:rolleyes:Quote:
Originally Posted by RAMMAN
@ceemic
Why are you so sure?
i don't want to believe that 01A and 04A are so different:rolleyes:Quote:
Originally Posted by gOJDO
L630F stable at 3.6 1.50v readings from asus probe
My chip it's worst ;)
E6600
L628A302 - IHS
2L626535 - PCB
A0905 - PCB
3,2GHz 1,435V
3,6GHz 1,645V (full stable, Orthos over 4h)
This a winner :)