Dragon Evo

Printable View

Show 100 post(s) from this thread on one page

12-12-2006, 10:17 PM
2fink

macci lives not in finland anymore... ;)
12-12-2006, 10:22 PM
LittleDevil

Quote:

Originally Posted by k|ngp|n

Still testing it. It works well so far. Similar peformance to the evo with ln2. Definitely designed with ln2 in mind and not really DI on that one.

Some units going out tommorrow :D. One is going to be used at the Abit event this weekend to be tortured with LN2. Among the other units is one going to another overseas ripper who was a huge influence to me in overclocking...and I am so honored to have this dude use it. I really hope he likes it and can remind everyone he is still around with his results ;)
http://www.overclockingpin.com/6%20evos%20web.jpg

I really like it ;)

regards
12-13-2006, 01:46 AM
zakelwe

Sampsa ? :)

Regards

Andy
12-13-2006, 02:12 AM
Entsafter

Ready to ship 3 of them?
Check pn pls vince ...
12-13-2006, 07:37 AM
massman

Quote:

Originally Posted by zakelwe

Sampsa ? :)

Regards

Andy

Hipro5, I guess :p
12-13-2006, 01:41 PM
ilkkahy

I think its the guy who is a real wizard in optimizing memory bandwidth things. I remember he was supposed to get one of those kingpins solid unit looong time ago. Im totally going to ask him to borrow it for dryice tests later on :D
12-13-2006, 03:29 PM
k|ngp|n

A Fin no doubt :D. have fun torturing the hell out my unit on your load tester. You should get youself a nice cpu and mobo to play with though as that may be a little more enjoyable ;)
12-13-2006, 04:00 PM
filmbot

Quote:

Originally Posted by k|ngp|n

Still testing it. It works well so far. Similar peformance to the evo with ln2. Definitely designed with ln2 in mind and not really DI on that one.

Some units going out tommorrow :D. One is going to be used at the Abit event this weekend to be tortured with LN2. Among the other units is one going to another overseas ripper who was a huge influence to me in overclocking...and I am so honored to have this dude use it. I really hope he likes it and can remind everyone he is still around with his results ;)
http://www.overclockingpin.com/6%20evos%20web.jpg

Hopefully one of those is mine!
12-13-2006, 11:37 PM
Entsafter

What's going on? k|ngp|n doesn't answer my pns, but he read them...
I've paid 3 units and I don't like scam...

I don't accuse him of scamming... but I don't like the situation... why he read my pn's and didn't answer them? Come on.. we're talking about nearly 1k $ !!!
12-14-2006, 01:49 AM
T_M

Are you seriously accusing him of scamming you!!?!?!
12-14-2006, 02:16 AM
filmbot

Quote:

Originally Posted by Entsafter

What's going on? k|ngp|n doesn't answer my pns, but he read them...
I've paid 3 units and I don't like scam...

I don't accuse him of scamming... but I don't like the situation... why he read my pn's and didn't answer them? Come on.. we're talking about nearly 1k $ !!!

I talked to him Tuesday and he said mine would be shipping out first thing Wednesday(yesterday). He also said he was very busy Tuesday. Hes probably just been busy with other things. Before you completely freak out Id wait till at least Friday or Saturday, though I very highly doubt he wont respond to you by then.
12-14-2006, 09:34 AM
k|ngp|n

Quote:

Originally Posted by Entsafter

What's going on? k|ngp|n doesn't answer my pns, but he read them...
I've paid 3 units and I don't like scam...

I don't accuse him of scamming... but I don't like the situation... why he read my pn's and didn't answer them? Come on.. we're talking about nearly 1k $ !!!

haha...man some people trip way too quick. I only just got the paymnt on the 13th.
Eveytime I log into XS morning or night I have PMs, I read as many as I can and respond to the ones that I can. IF I HAVE THE TIME TO SIT THERE AND TYPE 10 RESPONSES. You know I told you overseas that the payment had to clear first man..chill out lol. I already responded to you this morning, and I didnt even know that you had posted this silly stuff in this thread. :D

Filmbot, have fun this morning....:D
12-14-2006, 02:04 PM
Eleven

Quote:

Originally Posted by GoriLLakoS

WOW!Nice pot vince..it will make the cost less....supreme mind..:D:D:D
Very nice idea for the big mass on the right place..:D

You just started a new fashion on the pots..:D

Bill you have a very short memory my friend.
I 'd personally told you the benefits of the half pot design over the solid one.I told you how the cross (in my pot the is a cross in the center) increases the buffer .I even wrote those at the lab.gr over a year ago when I and unseen made the first pot
Now you are acting like you 've never seen or heard any of those......:nono:

@k|ngp|n
Great work man .Love watching all your stuff.
Glad that your tests prove me right
12-14-2006, 03:09 PM
k|ngp|n

Quote:

Originally Posted by Eleven

@k|ngp|n
Great work man .Love watching all your stuff.
Glad that your tests prove me right

Hey thanx alot for that! I would love to do a unit like this one in solid copper, but the cost be would be so insane even if the tooling/machining/difficulty was possible at 8 inches. Also the cost of copper these day is ridiculous. This one was all about keeping as much of the "solid benching feel and performance" in terms of capacity, load control, and rate of swing...using only a 3 inch "base" with some aluminum pipe :D. Was time to try something a little different and keep that end result in mind...do the most with the least. I'm quite happy with the way it turned out.

Swedish overclocking team is about to add some more HP to their dyno:
:toast: Good luck with them fellas
http://www.overclockingpin.com/3%20e...s%20swedes.jpg
12-15-2006, 12:54 AM
boblemagnifique

Very Nice Work kingpin

Very beautiful !!!
12-15-2006, 07:31 AM
Entsafter

I've to apologize...
Vince has shipped my 3 pots! Big THX!
12-17-2006, 09:48 AM
kiwi

"Full shot of acetone AND NO MORE!"

How much is that in ml or fluid ounces? :)
12-17-2006, 10:39 AM
JasonDTM

44ml or 1.5 fluid ounces. ^^^
12-17-2006, 08:14 PM
T_M

Is Australia a shot is 30ml
12-17-2006, 09:19 PM
JasonDTM

^^ That would be a pony shot in US terms. ;)
12-18-2006, 01:43 AM
Dani

It cant depend on how much aceton we use, I mean +- 10ml.
30ml vs. 50ml no difference in action ;)

EDIT: 10mm to ml :D
12-18-2006, 02:37 AM
T_M

agreed Dani, i dont measure, just pour a bit, say yep thats about enough, burp, then pour in a touch more :)
12-18-2006, 09:41 AM
k|ngp|n

Quote:

Originally Posted by T_M

agreed Dani, i dont measure, just pour a bit, say yep thats about enough, burp, then pour in a touch more :)

heh..yah about 1.5ounces is usually good but of course depends on the internal volume of the container as well.

BTW--I should have another 7 evo units completed on wednesday-thurs....
12-18-2006, 09:59 AM
GoriLLakoS

Quote:

Originally Posted by Eleven

Bill you have a very short memory my friend.
I 'd personally told you the benefits of the half pot design over the solid one.I told you how the cross (in my pot the is a cross in the center) increases the buffer .I even wrote those at the lab.gr over a year ago when I and unseen made the first pot
Now you are acting like you 've never seen or heard any of those......:nono:

You were using single tube?or thick tube?

With ~-130 temps that conroes can hande...you cannot test very good a pot...the thing you can test is only how much hour the base can be stable at some temps...if you would like to test how good is a pot...go and test an Intel 670 with 2 volts on Core..:D

With LN2 every Pot imo can go down down to ~180- -190C but not all can hold the temps down there...;)

I think the cross was only for the ''moto'' (for all the cooling series you are making and caling them ''crusader'')and i admire them cause they are very good , but you have not make it for a specific reason...you need mass down there and you give it like a cross..i can make it like a ''G''...:)
12-19-2006, 08:58 AM
Entsafter

My box arrived today with 3 pots:

http://img120.imageshack.us/img120/8...1694qy6.th.jpg

How it looks like inside...

http://img185.imageshack.us/img185/2...1701el3.th.jpg

A damn nice inside structur, much better than my other tubes...:

http://img120.imageshack.us/img120/1...1703ja0.th.jpg

inlcuding mounting kit:

http://img185.imageshack.us/img185/7...1704pd4.th.jpg

Do you see a better mounting kit? I don't!

http://img120.imageshack.us/img120/9...1705jx0.th.jpg

I can only tell you that I'm a proud owner of one of the best looking ln2 pots in the world!
Big THX to Vince!!!

Show 100 post(s) from this thread on one page