Corsair 5400UL, or 8000UL both have Fatbody D9 in them.... no matter what version you get.
Printable View
Corsair 5400UL, or 8000UL both have Fatbody D9 in them.... no matter what version you get.
Hey folks.
Well.. here are my results with the 5400UL v1.5.
I am using P5B-Dlx 0711, and the board is vDDR modded.
I was running around 2.5~2.6vDDR. Sorry.. I forgot to bring my volt meter today :(
So here is my result with 32MB Spi. Sorry.. I didn't have time to run memtest:
3-3-2-8 @ 862Mhz
4-4-4-8 @ 1120Mhz
For some reason, it didn't like 5-5-5-12. It just restarted at the speed the Cas 4 was stable at. I didn't really have time to investigate. But I know you folks are interested with the results of the v1.5, so I wanted to share those w/ everyone right away.
These mem aren't that bad, but not spectacular in my books. My Geil PC8000 Plus can do Cas 4 @ 1200 w/ the same voltage, and those are 2x1GB setup.
If you need cheap DDR2 that can do tight timing, but can't afford the 2GB setup at the same price, I would definitely buy them. Cas4 @ 1100+ Mhz isn't anythign to sneeze at.
Ok folks.. taht is it for me.. need to go prep for Turkey Day and Black Friday :D
SAD
No 4-3-2-1 or 3-2-2-1? :(
My 8000ul's ;)
http://www.sspmustang.com/OT/x3060/3...ual1m-run1.jpg
^^What vdimm?
2.65 bios, 2.67-8 with DMM.Quote:
Originally Posted by nicepun
Yikes! & I thought my 2.55V 4-3-2-4 DDR2-1000 was being extreme.Quote:
Originally Posted by fhpchris
I run 2.55v daily on my D9GMH... ;)Quote:
Originally Posted by The Nemesis
On my fatties I might run 2.65v daily, at least until they die. If 4:5 works well with a Xeon 3070, I might only have to run 2.45...
If anyone is still interested, there are only 3 sets left as of 10:00 AM (East Coast time zone).
OOS, let's se if they get more. Other people should post results as well.
I can get 583 4-3-2-1 with my 8000UL's @2,8volts, that performance is the same than 3-3-3-1, so here is the point of Fat Body, imagine D9GMH@600 3-3-3, good fattys can do 600 4-3-2-1, too bad that's only on 2x512mb... My 2x1gb fatty are only capable of 525 4-3-2-1 @2,8volts... :(
Regards! :toast:
PS: i've just tested 2x1gb fatty vs 2x1gb ballistix pc5300 d9gmh, same spi time 800 4-3-2-1 than 800 3-3-3-1. ;)
Only $130?
I had no idea these were so cheap. Gotta bookmark that link. ;)
just bought 1 set.
only 1 set left, who will get it?:stick:
Any more results guys?
Just got mine in. v1.5. I'll give 'em a quick test.
Can't wait for your results:)Quote:
Originally Posted by DragonOrta
Ditto............:)Quote:
Originally Posted by DragonOrta
should be receiving them today. However I don't have my mobo yet heh so it's just another piece of hardware I can't use :(. though that infinity does look awfully attractive.
Well I don't know what happend because after I insalled this ram I can't no longer do 400+FSB, even after I put the 8000ULs back, however, I does 1000Mhz 4-3-2-4 @ 2.45vdimm just fine.
1000mhz 4-3-2-4 is no problem for the set I got @ 2.4v. Once I get the 560w Zeus PSU that I ordered from East Luna in, I'll be able to give them a try in my Biostar 965PT that had a vdimm mod.
I did :)Quote:
Originally Posted by KaptainBlaZzed
WILL HAVE THEM TOMORROW! I just modded my biostar tforce 965p-t and it runs 2.5v+ no problem at all. So tomorrow I will show some benchies as well.
-Collin-
I think I would rather have 1 GB sticks too. TigerDirect has apparently high binned GMH (Crucial Ballistix, DDR2-1000, 5-5-5-15) for $238.99: http://www.tigerdirect.com/applicati...Tab=0&NoMapp=0Quote:
Originally Posted by ^don.k's^
EDIT: Umm... that's $238.99 for 1GB... ooops.
Are these lower binned Fat Bodies (5400UL v1.5) so much better than Crucial Ballistix DDR2-1000 or should I send them back?Quote:
So here is my result with 32MB Spi. Sorry.. I didn't have time to run memtest:
3-3-2-8 @ 862Mhz
4-4-4-8 @ 1120Mhz
For some reason, it didn't like 5-5-5-12. It just restarted at the speed the Cas 4 was stable at. I didn't really have time to investigate. But I know you folks are interested with the results of the v1.5, so I wanted to share those w/ everyone right away.
These mem aren't that bad, but not spectacular in my books. My Geil PC8000 Plus can do Cas 4 @ 1200 w/ the same voltage, and those are 2x1GB setup.
If you need cheap DDR2 that can do tight timing, but can't afford the 2GB setup at the same price, I would definitely buy them. Cas4 @ 1100+ Mhz isn't anythign to sneeze at.
anybody else have any results? I'm still waiting for RD600 heh.
What is the max your set will do at 4-4-4?Quote:
Originally Posted by nicepun
My 2 sets came so I am ready to rock and roll. I just want to know what you guys are running so I have something to compare.
Just finished my volt mod on the biostar tforce 965p-t...here are my results are 2.45v.
[img]http://www.collinsacks.com/images/hosting/e6300_1.JPG[.img]
I love this ram.
-Collin-